Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (82 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
I can’t speak as to the long term durability of them as I sold the trailer. They seemed to do the job though, HOWEVER, the dust caps didn’t fit correctly & that was annoying.
Buying the entire pre-greased hub assembly for my jetski trailer saved me a lot of time compared to just changing out the bearings and races and then having to re-pack them. Ordering was easy, Odelia just needed the bearing number and that was it. She was so helpful! I had to knock off one star because the new dust caps that came with the kit (and are crucial to keeping the water out) would not engage onto the new hub as shipped. I had to take them to the workbench and carefully hammer the leading edge around the entire circumference of the cap to get it concave enough to fit into the hub. At that point, I was finally able to send it the rest of the way in with a rubber mallet
I am sure that if I would have called one of your reps I could have gotten the correct hub. This hub has a spindle depth of about 4" and my spindle is about 3 1/4"...so the spindle nut will not go on. Maybe I missed some thing but if the hub/spindle depth were mentioned I don't think the mistake would have made. I used your new bearings on the old hubs to get me through.
Paula was excellent! Made sure the part shipped out the same day since it was a must have item to get the trailer going for people that were from out of town.
They work as advertised. I have no complaints. I use this trailer to pull two kayaks and have taken it from Oklahoma to Little Rock twice, to Mississippi twice and back and forth to local lakes with no issues.
Bennie
8/10/2022
Still have no issues. Lube a couple times a year, depending on use. I am happy with the purchase!
Fantastic fast great price great quality top notch communication nothing but positive A1 service at e-trailer
All parts arrived as expected and fit on my trailer as expected. The install video on the website was a great resource for a first time bearing packer and installer, such as myself.
Josh
8/11/2020
After a year, the hubs and bearings are still working flawlessly. I guess I installed them correctly Excellent product!
Good price. It had everything in the package that I wanted and needed. I oiled the axle and the hub slid on perfectly. The delivery was quick and on time. The only problem I had was in placing the order. I was looking for the PROCEED TO CHECK OUT. but could not find it immediately. My mistake I guess.
I was struggling to find the correct hub kit for my boat trailer because etrailer has a large inventory of products. I decided to call and the salesperson Mellissa found the correct part in minutes and had it shipped to my house in less than 24 hours. It’s is nice to know that etrailer still believes in great customer service and the human element of customer service.
Quick shipment (on Christmas Eve) and well packaged. Intended to use as spare (pre-assembled hub) for trave.
I bought these hubs as replacements on a 1992 Coleman tent trailer. Although I purchased them a year ago, they weren't installed until a couple of months ago. My son took the trailer camping in the mountains last month, and his trip went well. I'm very happy with these hubs!
Great fit on our old trailer. We were worried we'd never find the right hubs for our '95 Haulin' wagon. These slipped right on and we're ready to roll again! Arrived in perfect condition and record time.
I received both my HUBS yesterday and installed just the LH side unit for now. The LH side Hub was the one where both bearings had come apart for not keeping them "LUBED" and a worn out inner seal. I really thought I was going to have to trash my trailer. On a trip back to the house the HUB had been running on its axel shaft, but "THANK GOD NOT FOR A LONG TIME". I had a little bit of a problem getting the inner bearing to slid on the axel shaft but that was because of the old HUB had marked up the axel shaft and needed a little sanding down for it to slip on. Everything went on as planned and today I'll be taken her for another load of Top Soil. Let me tell U, etrailer has been my source for everything I've needed and the help in ordering the right stuff and prices are "EXCELLENT".
Excellent product. This assembly is a great value, I installed it on my seadoo trailer. The only thing that did not fit was the grease seal. The one that comes with the kit was too big, I had to order a smaller size to fit my spindle. I totally missed that when I ordered it. Highly recommend this product! Thanks for the great customer service.
good service. my second order I ordered the wrong size hub. talked to sam on the phone and he figured out what I needed and I reordered and got what I needed. he sent me info on how to return my wrong one and everything went good. I had recently bought a hub and bearings like this from a parts store for $59.00 and this one from e-trailer I think was xxx dollars. very good place to buy.
After installation on my snowmobile trailer, and use for 2 seasons now, the product is still going strong. Good build quality and excellent value, I expect these hubs to last the remaining life of the trailer! I will continue to do business with etrailer. Thank you!
Had to get my 20lb sledge to "tap" it onto straight axle. She sits on there fine now! Cotter pins slightly too large to fit all the way through hole but those should be easy to find. Trailer people very nice but made me take the opposite side hub off and apart to get code numbers on bearings as they could not identify the hub size on my 5x8 TarterTrailer that I bought a few years ago at Home Depot. Home Depot would not help as Tarter no longer makes trailers.
I bougat a pair of trailer hubs front etrailer. The precise measurements on the bearings and seals given on the Web site made it very easy to select the correct part. During installation they fit like a glove. Shipping was prompt. I recommend etrailer for your trailer needs.
The hub kit came all pre-assembled and greased ready to go. All I had to do was clean off my spindle, put the new hub with bearings on, washer, castle nut and cotter pin and I was done. One of the easiest projects I've done and a very quality product at that!
good replacement for old hub that got messed up from bearing going out
Joseph R.
7/31/2021
Still working fine
Great price, quick delivery. Super easy install, 10 minutes with a beer. Glad I bought the pre greased ones.
You gotta really hit the dust caps hard to get them on.
Look great with my new tires and wheels.
Kind of early to review since I just installed them and haven't actually tested the product out yet but seems ok so far, $ for hubs is a greeat price and comparing the hub I took off I can't see much difference
Just a suggestion, go ahead and throw in .20 cents worth of cotter pins to complete the set, would have paid a few dollars more not to have to run to the hardware store for a cotter pin
Great price. Wrong size grease seal for my 1995 fleetwood popup. Upgraded me to 2 day shipping without charging day after I bought it. Will be a repeat customer.
I have a trailer company few towns away but decided to use e trailer very happy with my experience, great selection of parts and prices will definitely recommend E trailer to anyone looking for great products at fair prices and extremely fast shipping thank you.
Correct parts arrived very fast, prices are great, customer service second to none. I don't believe I'll be shopping for trailer parts anywhere else. You guys hit it out of the park! Thank you
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
1/5/2023
It is a great suggestion to add the depth of the hub to the site. I have requested to have it added to the product page.