D Washer for EZ Lube Spindles
(226 reviews)
Price: $4.27
In Stock
D Washer for EZ Lube Spindles
Item # 5-23
Retail:$4.56
Our Price: $4.27
You Save: 6%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (226)
- Q & A (0)
- Videos (1)
- Photos
TruRyde Accessories and Parts - 5-23
- Trailer Spindles
- Spindle Washer
- TruRyde
- 1 Inch I.D.
Features:
- For use with EZ Lube spindles with a 1" diameter thread
- Outer diameter: 1-11/16"
- Inner diameter: 1"
FA-DW100 TruRyde D Washer
Video of D Washer for EZ Lube Spindles
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of TruRyde D Washer For EZ Lube Spindles - 5-23
Hi, everybody, Andy here with etrailer.com, and today we're gonna take a real quick look at this D Washer for EZ Lube Spindles. Now, this is going to be used for your EZ Lube spindles with a one engine diameter thread. And let me pull out my ruler here, and just give you some measurements that you might find helpful. The overall diameter is sitting right at one and 1 11/16th inches and the inner diameter we are sitting right at an inch. And then the measuring the inner diameter again, but from this what I'm calling the more narrow diameter right there from that straight edge there. We're sitting right at, looks like about 15, 16th of inch.
And then the width, we're sitting right at an eighth of an inch. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Alternate product found
Customer Reviews
D Washer for EZ Lube Spindles - 5-23
Average Customer Rating: 4.8 out of 5 stars (226 Customer Reviews)
by: Corey02/10/2024
During an annual inspection of the wheel bearings on a new to me fifth wheel, I found that the driver side was missing the washer on both axels. Fits exactly like the oem washer and has us ready for camping season. etrailer always has a great selection of parts at reasonable prices and great staff to keep you updated on the order process.
by: Steve 03/29/2024
They worked great
by: Jesse 03/28/2023
After being in storage, in a field, for more than 2 years, Water had contaminated the original hub, pitting the bearings and races and they had not been serviced since, at least 1999. I polished up the EZ lube spindles, flushed out the old grease and I was ready. Everything fit perfectly. It was aa perfect match. Used new Nuts and Washers. re-installed the Wheels and Tires, Torqued to 90-10lb. The old 6 x 4 Wells Cargo trailer is once again Ready for the coming rendezvous season.
by: James 04/12/2024
EXCELLENT PRODUCT
by: John 08/30/2023
E trailer never disappoints. Great service all the way around. Thank you!
by: Timothy 07/02/2022
Very easy to place order, my order was filled and delivered in less than a week. Very good company to deal with.
by: Bruce 07/19/2022
Fit perfectly and still running them to day.
Bruce
7/20/2023
One year later and everything worked perfectly.
by: Thomas05/18/2022
has performed as expected would buy aga in
Tom C.
5/19/2023
part is working as expected would buy again
Tom C.
5/19/2023
part is working as expected would buy again
by: Albert 05/10/2023
They are highly organized. Shipping is very very fast and the tech-support is outstanding. The pricing is also very good.
by: Michael 04/01/2023
Exact replacement for my original. I'm very pleased.
by: Gary C02/28/2017
Ordered 2 Bearing kits for Spindle #84, plus D washers and cotter pins for my heavy duty homemade trailer. Fast shipping, bearings arrived well packages in good shape.. exact fit , no issues on installation.. very quite and smooth.. time will tell on quality and how long they last, but appear to be just as good as other higher priced bearings and seals I have purchased in the past.. Will order again.
by: Duane B.09/10/2016
I replaced all the bearings races seals and brakes on a small travel trailer. Bill P.at etrailer took my order and three days later I had everything in my hands. Great job Bill ! All the parts were exact replacements and the install went very smooth. There is video help on their website to show how to make the install easier. I have been dealing with etrailer for several years and have never had a bad experience. I was completely blown away by the pre assembled brakes . Backing plate, shoes, actuators, self adjusters and wiring all ready to bolt on. How much easier can it be? With the best prices, fast shipping and great help on line etrailer is the way to go.
by: Brian 09/27/2022
Odd Washer, Etrailer has all my parts for my boat trailer, fit perfect
by: John09/24/2016
Just received my order of new backing plate assemblies and some misc small parts. Ordered on line late Sunday night, confirmed I had ordered the right parts Monday morning before shipment went out. Customer service by phone was superb and the gal I talked with was perfect. Shipment was on my porch Friday afternoon. I did open box and inspect shipment that arrived completely intact/good shape and all looked good at this point. Not sure when will get to the brakes on the trailer but will post again when the job is done. So far nothing but good to say about Etrailer.com. Regards, John.
by: Randy R06/20/2017
My trailer was purchased several years ago and when I went to check the bearings, I discovered the D washers were missing. I called etrailer and talked to Shannon S. The washers were shipped the same day and arrived several days later.
Excellent customer service, very easy to talk to and excellent shipping. It's hard to find a company like etrailer that takes care of their customers.
I definitely will be a future customer.
by: Dianne L.05/26/2017
All the products were exactly what I needed to repair my trailer. After a little glitch in the order I contacted customer service and the problem was immediately resolved. I will definitely be shopping again when/if I need parts.
by: joe bob04/17/2016
just what I needed because I couldn't find them when replacing trailer bearings could only find the castle nut with pin and round washer and my trailer axles don't have holes for the pin. had to improvise with E clips until received these in the mail. very happy
by: Dan Martin09/03/2014
Outstanding washer and castle nut, fit perfect and shipped quickly!
Thank you etrailer.com
Dan M.
9/3/2015
working great!
by: Rich03/17/2015
I placed my order on a Sunday afternoon and received an email about 3 hours later from etrailer saying it had just been shipped. What great service! The package arrived 2 days later. Etrailer is now my go-to company for RV parts.
by: Ralph11/19/2021
I was very pleased because I was told that there was a backorder on the hub that I ordered and was not expecting to get until December, so much to my surprise it showed up at my front door this afternoon. Thank you for the great service and Cudos to Alex for his help in making this happen. I would recommend to everyone to shop with etrailer.com for their trailer wheel parts. I was very pleased for the great service.
by: KenS07/23/2016
I lost a wheel off my trailer on I96 entrance ramp because the manufacturer did not use these washers. Check yours and get these if needed!!!
by: Randall 10/09/2019
Much better than originally installed.
I ordered 4, 1 for each axle prior to doing
bearing maintenance. Glad I did, the original
Washers were thin and had to peal them off the axle with a screw driver.
by: Scott S05/15/2019
The parts (trailer brakes and supplies for initial brake install) were delivered ahead of schedule, they were all in good shape, and they have all worked great.
by: David08/16/2022
Never changed an axle before, but everything went fine with these parts. Seems to be holding up to my very limited use.
by: Robert O05/24/2017
I lost a wheel and brake drum and limped into the campground. I called etrailer and ordered the parts through Lazer. My parts arrived the next day and the order was 100% correct. I am safe at home and am one happy camper.
25
226
Show More Reviews
See what our Experts say about this TruRyde Accessories and Parts
- Recommended Replacement D Washer for EZ Lube Spindles W/ 1" Diameter ThreadHey David, I did some scraping around and it looks like the closest we carry is the D Washer for EZ Lube Spindles # 5-23 which has an 1 11/16" outer diameter (5/16" smaller), a 15/16" inner (1/8" larger), and is an 1/8" thick (1/16" smaller).
view full answer... - Replacement D-Washer for Dexter EZ Lube SpindlesYes, the D Washer for EZ Lube Spindles # 5-23 will work to replace the 005-057-00 D-washer for your Dexter EZ lube spindles.
view full answer... - Does Trailer with 1-1/16 inch Spindle Need 1-1/16 inch Diameter WasherWhile your spindle may have a diameter of 1-1/16 inch where the bearings ride the diameter where the threads are is actually 1 inch like what the part # 5-23 that you referenced assuming you have a standard trailer spindle which it sounds like you do.
view full answer... - Need Tang Washer Axle Nut Retainer Clip for Dexter 6000-lb Axle with 6 Lug WheelsWe offer part # 5-101 from TruRyde which is a tang-type washer intended for EZ-Lube spindles. This washer has a tab that fits between the notches on the castle nut to hold it in place. The inner diameter of this washer is 1-inch. The linked video will provide a demonstration of the installation. We also offer a D washer # 5-23 that is installed on the spindle before the tang washer.
view full answer... - Fit of D Washer and Tang Washer for 1-1/16 Inch SpindleThe washer # 5-101 is the 1 inch diameter standard size and there is not anything that is 1-1/16 inches as you stated. This washer will work well along with the D Washer for EZ Lube Spindles # 5-23 for your spindle and bearings.
view full answer... - Are D-Washers and Tang Washers Both Necessary on Trailer SpindleWhatever bearing kit you got likely came with both to give you options. Since you already had a tang washer on your spindle you can stick with the tang washer. Using the tang washer like the # 5-101 with a D washer like the # 5-23 would give you no advantage.
view full answer... - 1in D Washer Recommendation for 1 Inch Diameter SpindleIf the axles of your trailer are rated between 3.5k and 5.2k I would recommend that you use the TruRyde D Washer, part # 5-23, that you referenced. If you have axles that are rated between 6k and 8k I would recommend you use the Redline D Washer, part # 5-57. I attached a link to a video of a trailer hub being removed and reinstalled from a trailer that you might find informative.
view full answer... - Replacement D Tang Spindle Washer for E-Z Lube Spindle on 3500-lb AxleThe TruRyde Replacement D Tang Spindle Washer # 5-101 that you referenced has a 1-inch inner diameter to fit on 1-inch diameter spindles. All such items that we offer share this same 1-inch inner diameter, such as parts # 5-23 and # 5-57. The points on your spindles where the bearings ride can have a larger diameter than the exterior point where you will apply the D-washer. Please refer to the linked photo.
view full answer...
- Availability of 1 Inch Keyed Spindle WasherWe have a few washers that would work for you. If you want the tang style that can be bent over the notch in the castle nut, go with # 5-101. If you're looking for the D washer used on EZ lube spindles, use part # 5-23. For a spindle with the grooved keyway in it, use part # 165863.
view full answer... - Correct Replacement Spindle Washer for Dexter 3,500LB AxleA standard spindle will use the Washer For 1" Spindle # SW1000 or the D Washer for EZ Lube Spindles # 5-23.
view full answer... - D Washer for 3,500 lb Hub Assembly Item # 84545BXA 3500 lb axle typically has a 1 inch diameter threaded portion. The # 5-23 would be the correct D washer for your application.
view full answer... - Availability of Spindle Washer for Boat TrailerIt sounds like you're looking for a washer like the # SW1000. You may also have a D washer like the # 5-23. I am attaching a link below with all of our available spindle washers so you can choose the right style based on what you previously had.
view full answer... - Washers Compatible With 7/8 Inch Castle NutFor castle nut # 165931, for a D washer use part # 5-23 or round washer use part # SW1000. These are both for 1 inch spindles but are compatible with the 7/8 inch castle nut assemblies. You can also use the Replacement Spindle Washer - Tang Type for E-Z Lube # 5-101.
view full answer... - Replacement Spindle Castle Nut and D Washer for a TrailerYes, we do have replacement spindle nuts and washers. I have included links to all of the options we carry. We have 2 different D-washers. First, # 5-23 is designed for 3.5K to 5.2K axles. And # 5-57 is for 6K to 8K axles.
view full answer... - How to Choose Replacement Spindle Washers You can identify the correct D-washer for your spindles by confirming the axle capacity on the axle's identification sticker or plate. If you have a 3500-lb to 5200-lb axle (or a regular duty 6000-lb axle) you can use # 5-23. If your axle is rated for 6000-lbs (heavy duty), 7000-lbs or 8000-lbs or is a pre-1989 9000-lb axle) you can use part # 5-57. If you have E-Z Lube spindles you can use tang washer # 5-101. All of these have a 1-inch inner diameter.
view full answer... - D Shaped Spindle Washer for Large TrailerThe largest washer we carry in the D shape is the "D" Washer for Spindle, 6K-8K Axles # 5-57 which also fits Dexter 9K axles built before Oct. 1989. This washer has a 1 inch inner diameter. The D Washer for EZ Lube Spindles # 5-23 also has a inch inner diameter and an outer diameter of 1.67 inches. The # BK2-100 kit you referenced has the tang type washer # 5-101 that is only 1/32 inch thick.
view full answer... - Replacement Spindle Washers For An Old Trailer With 10k Axles We carry a variety of different spindle washers so you'll want to measure your current washers and note the design to match it up to the correct design for your spindles: Replacement Spindle Washer - Tang Type for E-Z Lube # 5-101 Washer For 1" Spindle # SW1000 (most common) Tang Replacement Spindle Washer # 5-71 D Washer for EZ Lube Spindles # 5-23 Washer Spindle Tongue # 165863
view full answer... - Trailer Spindle Washer with 1 Inch Inner DiameterDexter Tang Washer # 5-59 has an inner diameter of 1-3/4 inches. We do have several washer styles with 1 inch diameters though: # 5-101 # 5-57 # 5-23 # SW1000 # 165863
view full answer... - Replacement Spindle Washer For Dexter 2,000LB Trailer AxleYou should have a spindle washer between the outer bearing and the spindle nut. There are different washers depending on exactly what spindle you have. Washer For 1" Spindle # SW1000 D Washer for EZ Lube Spindles # 5-23 Washer Spindle Tongue # 165863
view full answer... - Replacement Dexter Hub with 5 on 4-3/4 inch Bolt Pattern and Inner Race L68111Based on the info you listed the correct replacement Dexter hub is the part # 84546UC3 that you referenced. This comes with the bearings and seal you need as well. The D-washer you'd need is the part # 5-23 and you'd be set.
view full answer... - How To Secure A Hub Assembly To A Spindle On A 3,500 Lb. Axle The majority of most axles use either a retaining nut or cotter pin with a "D" washer and castle nut to secure the hub onto the spindle. I am not sure what you are referring to as most common axle types do not use a lock washer to secure the hub assembly to the spindle, however I have included all the parts you will need to do so. For the retaining nut you will need the Replacement Nut Retainer part # 6-190. If you need the "D" washer and castle nut you will want the "D" Washer part #...
view full answer... - XL Kodiak ProLube 1980 Castle Nut Washer RecommendationDo you have an overly large castle nut washer? It seems odd that the washer is too big to fit in the cap of the # XLPROLUBE1980KIT. Since this kit is designed for 3.5k axles the correct replacement washer should be the # 5-23. This washer should be very similar in size to the castle nut.
view full answer... - Is Washer Needed When Installing BT8 Bearing Kit on Trailer AxleWhile the BT8 Bearing Kit part # BK1-100 does not come with a washer you would still need to use a washer like the part # 5-23. If you are having a hard time getting the nut to thread on with the washer installed you'd need make sure the inner bearing is all the way seated on the spindle and doesn't need to be installed further onto it. For more info on this I attached video that covers this as well.
view full answer... - Replacement Washer for an EZ Lube Trailer SpindleEZ lube spindles generally use a tang washer to prevent the castle nut from turning. There are different sizes available depending on what is needed. For example, # 5-101 has an inner diameter of 1 inch. Washer # 5-71 has a different design and a 1-1/2 inch inner diameter. Washer # 5-59 is similar but larger with a 1-3/4 inch inner diameter. Sometimes you will see a D-shaped opening on an EZ spindle washer such as # 5-23. On this one the distance from the straight edge to the furthest...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Hannah L
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Timothy
7/3/2023
Works as it should.