How to Find Replacement Hubs for 1993 Skamper 17X Pop Up Camper
Question:
I want to put new hubs on this pop up. i had a tire come off on me on my first trip with it. it has bolt on, and i want stud with wheel nuts. Any idea of what hub will fit? are the pre greased ready to go on the spindle?
asked by: Larry W
Expert Reply:
Based on what I was able to find, your 1993 Skamper 17X more than likely has 2,000 lb axles. If that is the case, you will either have a # L44643 inner and outer bearing or # L44649. You will need to verify this information.
You can inspect your current bearings to see if they have part numbers stamped on the side. If none are present, or they have worn off, you will need to measure. I recommend using a digital caliper like the # PTW80157. The measurement you need is the inner diameter of the bearings. Alternatively, you can measure the spindle where the bearings ride.
If you have an inner diameter of 1.00" then you can use the Dexter Trailer Idler Hub Assembly # 34822545BX you were looking at. If the inner diameter is 1.063" then you have # L44649 bearings and you could use the # AKIHUB-545-2-2K.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Peterson Combination Trailer Tail Light - 4 Function - White Base - Red Lens - Passenger Side
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Replacement Trailer Hub Bearing - L44649
- Article: Trailer Wiring Diagrams
- Shop: Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Search Results: 205 80 10 tire
- Q&A: Replacement Bearing Kit for Pop-Up Camper
- Search Results: torsion axle
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30080 Review
- Search Results: microwave vent cover
- Search Results: exhaust vent cover
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Video: Review of TruRyde Trailer Spindles - Standard BT8 Spindle - TRU94FR
- Q&A: What are the Correct Hubs for a 2,000 lb Axle?
- Q&A: How to Determine the Correct Parts for an Axle Flip on a 1993 Skamper Pop-Up Trailer
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Search Results: bt8 spindle
- Video: etrailer Stabilizer Jack Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-EZ-2K Review
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Q&A: Replacement Tires And Wheels For A 1986 Skamper Pop-up Camper
- Q&A: Recommended 5.30-12 Tire and Wheel Combo for 2001 Skamper Tent Trailer
- Search Results: hub
- Search Results: rim