Upgrading 8 Wheels to 12 Wheels on 1993 Rockwood Pop Up Camper
Question:
Im redoing an old 93 Rockwood pop-up, and the original wheels/tires are 8 4 on 4 hubs. AL-KO SF19 torsion axle, I think. The wheel-well opening is 24. I want to upgrade the hubs to 5 lug, and the wheels/tires to 12. The OD of 12 tires are typically between 20-21, right? So I should have some room. The bearings are L44649, so I guess that makes it a 1-1/16 spindle. Suggestions?
asked by: Joseph A
Expert Reply:
You are correct that tires on 12" wheels are in the range of about 20" - 22" for the outer diameter.
For your application I recommend using the Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-2K which uses the 5 on 4-1/2" bolt pattern and fits 8" - 12" wheels, and then the Taskmaster 4.80R12 Radial Trailer Tire w/ 12" White Spoke Wheel # TA98RR which has an overall diameter of 20.63".
We normally recommend having about 4" of clearance between the tires and fenders to account for suspension flex. This setup will put you at about 3-1/2" of clearance so that is something you'll need to be mindful of.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Does The Curt SecureLatch Lunette Ring CU49FR Come With Hardware? What Kind Of Bolts?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure a Trailer Axle
- Q&A: Valve Stem Rating of Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Tell if Vesper Steel Modular Trailer Wheel with 5 on 5" Bolt Pattern Matches Trailer
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Q&A: Can Trailer With 2,000 lb Axle Switch From Hub With 4 on 4 to 5 on 5-1/2 Bolt Pattern