Replacement Bearing Kit For a Malone LowMax Trailer MPG595
Question:
I have a Malone LowMax trailer, model number MPG595, and Im looking to pick up a couple of replacement bearing kits for it. They have an item on their own website, MPG499, that comes complete with the hubs and everything, but I really just want a compatible bearing kit. Their documentation unfortunately doesnt give me exact part numbers or sizing as far as I can tell. I was hoping to be able to figure out what I need without pulling apart the existing stuff to get to it. Its also currently winter and the trailer is buried in a couple feet of snow... Specs as far as I can find: • 1-1/16inch axle spindle diameter • 1.98inch hub ID • 5x4.5inch bolt pattern, 1/2-20 stud thread pitch • 5-9/16inch studded flange OD
asked by: Tyler J
Helpful Expert Reply:
Your Malone LowMax Trailer MPG595 will use a hub like our etrailer Hub # AKIHUB-545-2-2K. This will use the Bearing Kit # BK1-150 which contains the Bearings # L44649, Races # L44610, Grease Seal # 10-9, a grease cap, cotter pin and d-washer. You can add the Bearing Buddy Bearing Protectors # BB1980A-SS which will allow you to easily fill the hubs with grease.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommended Bearing Buddy and Bearing Kit for Malone MicroSport Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer