How To Switch to 5 on 5" Bolt Pattern With Dexter 3,000 Lb Torsion Axle
Question:
Just bought a Rockwood Geo Pro. It has a Dexter 3000 lb torsion axle with 5 on 4.5 wheels. I’d like to swap hubs to a 5 on 5 pattern which would allow me to run wheels that match my Jeep and consolidate from needing two different spares to just the one mounted on the Jeep. Is there a hub that I can swap using my same brakes and bearings? Thanks
asked by: Kieffer
Helpful Expert Reply:
The correct hub/drum you'll need to switch to a 5 on 5" bolt pattern is the Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K which will fit a Dexter 3,000 Lb Torsion Axle.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Is There 3,500 lb Trailer Axle With 89 Inch Hub Face Length & 5 on 5" Hub
- Q&A: Could Dexter Replacement Inner Coupler Member DX99FR Work on 2007 Mastercraft Boat Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/Drum
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommended Hub And Drum Assemblies With 5-On-5 Inch Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: How to Tell if Dexter Axle 3,500 lb Electric Trailer Brakes Will Fit Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer