Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
Question:
Hello eTrailer, I had a lug bolt break off of one of my hub drums on a 2013 Wildwood 26TBSS. In researching a replacement I attempted to merely replace the lug bolt itself, but could no locate an exact replacement. It appears to be an AL-KO 8700 hub drum. Would the AKHD-545-35-EZ-K be the proper replacement for my application? My measurements show 2 5/8” from lug center to center, which indicates a 5 on 4.5” spacing. Thanks in advance!
asked by: James M
Expert Reply:
The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the # AKHD-545-35-EZ-K is the correct fit and would work great.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Video: Review of Redline Trailer Bearings Races Seals Caps - Grease Seal - 10-42
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Trailer Valet RVR5 Remote-Controlled Trailer Dolly Review
- Search Results: l68149
- Video: TruRyde Electric Trailer Brake Kit Installation
- Search Results: 19~100
- Article: Testing Trailer Brake Magnets for Proper Function
- Search Results: brake adjuster
- Search Results: l44649
- Q&A: Changing from 10 x 1-3/4
- Search Results: bx8848
- Search Results: al~ko
- Search Results: 4813100
- Shop: Vehicle Tow Bar Wiring
- Shop: Tonneau Cover
- Shop: Brake Controller
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Shop: Base Plate for Tow Bar
- Q&A: Will Rust Buildup Prevent Brake Magnets from Functioning in Electric Trailer Brake Assemblies
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Q&A: Why Cant Some Bike Racks be Used on the Back of an RV or Trailer
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K