Will Trailer Hub and Drum Assembly AKHD-550-35-EZ-K Work On M416 Military Trailer
Question:
Inquiring on getting hub assemblies or replacement axle for a M416 Military trailer. The current bolt pattern is 5x5.5 and want to change it to 5x5 so I can use my jeep jk tires on the trailer. please advice if item AKHD-550-35-EZ-K will work with current axle. if not which 3500 axle should I get if i want to retain the stock parking brakes and use 5x5 bolt pattern? thanks in advance for your response
asked by: Ronney S
Expert Reply:
The best way to make sure you get the right hub and drum assembly is to pull one of the hubs on your trailer and check out the bearings.
I have attached a photo that shows where the numbers should be on the side of the bearings. If you cannot find the number on the bearing you can use a digital caliper like part # PTW80157 and measure the inside diameter. Then measure the inside diameter of your hub and see if they match the dimensions of the bearings that are included with the # AKHD-550-35-EZ-K assembly.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Q&A: Adding Brakes to a Mobile Home Axle
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: Brake Controller
- Shop: Brake Mounting Flange for 3" Round Axle
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Can Brakes Be Added To Mobile Home Axle Used On Utility Trailer
- Q&A: Do Trailer Shackle Bolts Require Splines to Prevent Wear from Occurring
- Q&A: What Trailer Weight Requires Brakes
- Q&A: How To Upgrade to 6 Lug Hubs On Mobile Home Axle with 1.750" and 1.250" Bearings
- Q&A: Can Hub and Brake Drum Be Replaced with Idler Hub on Tandem Axle Trailer
- Q&A: Should Utility Trailer use Mobile Home Axles
- Search Results: trailer brake controller
- Video: Choosing the Right Brake Controller
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: equalizer
- Article: Trailer Tire Sizing
- Search Results: leaf spring
- Shop: Suspension Enhancement
- Article: Most Popular Wheel Bearings
- Search Results: brake controller
- Search Results: lug nut
- Shop: Fifth Wheel Hitch
on Trailer Hubs and Drums
