What Issues Could Happen If 17" Wheel Was Used With Hub and Drum Assembly AKHD-550-35-EZ-K?
Question:
Hello, I am building out a trailer for overland use. I see you list these for wheels up to 15. Can I mount a 17inch wheels with 31inch or 33inch tires? Do you recommend putting bigger tires with this set up. Thanks,
asked by: Pat
Expert Reply:
17" wheels with the 5 on 5" bolt pattern will physically fit on Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 - Pre-Greased # AKHD-550-35-EZ-K you were looking at for your overlanding trailer, but the potential issue with using the 17" wheels is that there will not be enough contact between the mounting surface of the hub and wheel to support the larger wheel.
Not having enough contact between the mounting surfaces can cause issues if you were to hit a curb or a rock off-roading as the wheel would be prone to breaking off or causing other issues with the spindle or axle.
There are no 3500lb hub and drum assemblies rated for 17" wheels at this time, so I recommend sticking with a 15" wheel.
I included a video of the # AKHD-550-35-EZ-K for you to take a look at.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-550-35-EZ-K
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Picking Out Brake Assemblies for Camper Trailer
- Q&A: Replacement Brake Drums and Brake Assembly Parts for Lance 1685 Travel Trailer
- Q&A: Determining if Dexter Trailer Brake Assemblies # 23-26-27 Fit 1995 Shorelandr Trailer
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-550-35-K
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Video: etrailer Trailer Hub And Drum Assembly Installation
- Search Results: electric brake
- Search Results: k23~468~00
- Search Results: k23~469~00
- Q&A: Timbren Axle Less Setup for Off Road Camper that Uses Jeep Wheel Bolt Pattern
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Search Results: 12~2~1
- Search Results: akhd~550~35~ez~k
- Search Results: 84556uc3~ez
- Search Results: electric drum brakes
- Video: Dexter Axle Trailer Brakes 23-468 Review
- Q&A: Comparing Timbren Axle-Less 2K Trailer Suspension Systems with 4" Lift
- Shop: Trailer Wiring
- Shop: Brake Controller