Trailer Hub for 3,500 lb Axle That Has 5 on 5 Bolt Pattern
Question:
Hello, I am looking to place brakes on trailer that has existing 3500 lbs axle but lugs pattern is 5 on 5. Most of your kits are 4-1/2. Do you offer something for 5? Thanks
asked by: Michael
Expert Reply:
There are idler hubs as well as hub and drums with a 5 on 5" bolt pattern for a 3,500 lb axle:
- Trailer Hub and Drum Assembly # AKHD-550-35-K (Standard Spindle) or # AKHD-550-35-EZ-K (E-Z Lube Spindle)
- Trailer Idler Hub Assembly # 84550BX (Standard Spindle) or # 84550UC1-EZ (E-Z Lube Spindle)
These will work so long as you have inner bearing L68149, outer bearing L44649 and grease seal 58846. They all have a 5 on 5" bolt pattern and are pre-greased for your convenience. I have added links to video reviews for you to check out as well.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator w/ Drop - Disc - Zinc - 2" Ball - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 8000 lbs GTW
- 2 Inch Ball Coupler
- Disc Brakes
- No Lockout
- Demco
more information >
Continue Researching
- Q&A: Dimensions of Demco Hydraulic Brake Acutator with Drop
- Q&A: Replacement Surge Brake Coupler For a EZ Loader Boat Trailer With Disc Brakes and Obsolete A-50 Coup
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Will The Kodiak Disc Brakes # KOD69FR Fit Load Rite Boat Trailer With 5,200LB Torsion Axles?
- Q&A: Best Option For Replacing A Tie Down LP750 Brake Actuator
- Q&A: Replacement Inner Member / Replacing A TDE 8000LP Brake Actuator
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Is There Demco Surge Coupler that Can be Used with Drum Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Flat Towing Package for 2005-2007 Jeep Liberty
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose a High-Low Adapter
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision