Recommended Replacement 3,500 lb Axle for Carson Trailer with 88" Hub-Face and 74" Spring-Center
Question:
So I have a Carson trailer 3500 pound I need a 88” in hub to hub center to center 74” 5 bolt 5 in pattern Do you guys have in stock ?
asked by: Jose
Expert Reply:
We do have a replacement 3,500 lb axle for your Carlson trailer as well as hubs that fit your description.
The axles that we carry have an 89" hub-face and 74" spring-center measurements so since the hub-face dimensions are only 1" off of what you measured these will work well for your application. I'm pretty sure that your axle has the 89" hub-face measurement as that is extremely common (and measuring the hub-face is a little difficult) but even if our axle hub-face is 1" wider there won't be an issue using this axle.
Since you have hubs with the 5 on 5" bolt pattern I recommend going with the Dexter Trailer Axle # T3584F-EZ-8974 with the EZ-Lube spindles and then either the hub and drum assembly # AKHD-550-35-EZ-K if you have brakes or the idler hub assembly # AKIHUB-550-35-EZ-K if you don't have brakes. These come in a quantity of 1 so you need to order 2 for your axle.
I have also attached some installation and review videos for you to check out.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Wheel Hub Recommendation for Carson Trailer with 5 on 5 Bolt Pattern and 3500 LB Axle
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-550-35-EZ-K
- Q&A: How Wide of a Rim is Recommended for the Tire Size ST225/75R15
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 5 - Silver Powder Coat
- Shop: Brake Controller
- Shop: Custom Wiring Adapter for Hayes Brake Controllers - Dual Plug
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Hayes Syncronizer Trailer Brake Controller - 1 to 2 Axles - Time Delayed
- Video: LubriMatic Tools - Grease and Lubricants - L11390 Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84550UC1-EZ Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84550BX Review
- Video: Dexter Trailer Idler Hub Assembly Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 84 spindle
- Search Results: hub assembly
- Search Results: 5x5 hub
- Search Results: trailer bearing seal
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Vehicle Tow Bar Wiring
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Search Results: trailer wiring
- Search Results: led side marker lights
- Search Results: 7 pin connector
- Q&A: How To Determine the Correct Replacement Trailer Hub Assembly
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: What Is The Wheel Stud Length On An EZ Lube 3,500-LB Idler Hub Assembly
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement