Replacement 8-256 Hub With A Stud To Stud Measurement Of 3"
Question:
Hi im looking for replacement hubs for my big tex trailer, the numbers on back of hub is.. 097 8-256 03 The stud measure middle of stud to middle of stud 3inch i dont see no hubs with that stud its has 5 studs
asked by: Russell
Expert Reply:
If you are measuring 3" center to center from one stud to the next and the number on the hub is 8-256 then you have a 3500lb axle with a 5 on 5 bolt pattern. I recommend the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 - Pre-Greased Item # AKHD-550-35-EZ-K. These come with the bearing installed and pre-greased.
If you are needing to replace your brake assemblies as well I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs Item # AKEBRK-35-SA. These are self adjusting with a 4 bolt mounting flange.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Is There 3,500 lb Trailer Axle With 89 Inch Hub Face Length & 5 on 5" Hub
- Q&A: Could Dexter Replacement Inner Coupler Member DX99FR Work on 2007 Mastercraft Boat Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/Drum
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended Hub And Drum Assemblies With 5-On-5 Inch Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: How to Tell if Dexter Axle 3,500 lb Electric Trailer Brakes Will Fit Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer