Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
(116 reviews)
Price: $34.28
In Stock
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Item # D-4
Retail:$46.38
Our Price: $34.28
You Save: 26%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (116)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - D-4
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- No Ball
- 7500 lbs GTW
- Class III
- CURT
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Sturdy steel ball mount with hollow shank measures 10-1/4" from center of hitch pin hole to center of ball hole. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion resistant.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction with hollow shank
- High-quality manufacturing process
- CNC-machined for strong, consistent cuts and welds
- 7-Stage washing method delivers smooth, clean surface
- Corrosion-resistant, black gloss powder coat finish
- Hitch pin and clip or hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Length: 10-1/4" from center of hitch pin hole to center of ball hole
- Rise: 3/4" from top of inside of hitch opening
- Drop: 2" from top of inside of hitch opening
- Ball hole diameter: 1"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
45040 Curt Trailer Hitch Ball Mount - 3/4" Rise or 2" Drop - 7,500 lbs
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4
Average Customer Rating: 4.8 out of 5 stars (116 Customer Reviews)
Sturdy steel ball mount with hollow shank measures 10-1/4" from center of hitch pin hole to center of ball hole. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion resistant.by: Michael05/02/2024
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
by: Coenraad10/19/2019
With good information from the website it was easy to order a Curt 2"
Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
by: Stan P.09/18/2016
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
by: Robert04/30/2023
surprised as part of the package sold the pin to secure the 2" ball mount was not included.
by: Robert 03/08/2024
Just what I wanted!
by: David 11/30/2023
No problem.It works as expected.
by: William06/20/2016
I purchased this unit to extend the trailer jack handle just far enough that I could open the tailgate on my truck with the trailer attached. It worked perfect. I tow a pop-up camper with 2006 Toyota Tacoma. Pricing was good and delivery was quick from etrailer. At first I tried to buy locally from auto parts store or camper store, but neither had in stock anything the right dimensions. The unit from etrailer is made in the USA, fit just right, and was better quality than what I saw locally.
by: Dale W.03/24/2012
I have to back up a hill and around a corner with arthritis in my neck to park my boat. I installed a front trailer hitch on my suv and needed this longer shaft Ball Mount to keep the ball far enough away from my license plate and front bumber that I won't damage my vehicle. The unit fits the bill to a "T" and has already gotten compliments from others for its quality and stability. I look forward to fishing season so I can use it.
by: Clint12/20/2014
I bought this ball mount to replace a shorter unit (8.5"-9") in order for the tailgate to clear the jack on one of my trailers when down. The first one that was delivered had a lot of damage to the powder coat finish due to rough shipping (UPS!). etrailer was very quick to send another out that arrived unscathed. Thanks again!
by: Baylor08/09/2022
Be aware that etrailer's guidelines for review prevent me from explaining my rating. I could give you the good and the bad, but not if I follow the company's guidelines which are slanted to control what potential customers can learn about the company's service.
by: EF2701/18/2014
I wanted a longer hitch sleeve to prevent back the trailer winch into the tailgate of my pickup and this works perfectly for that purpose. Price was great too! Thank you etrailer!
by: Glenn M.01/08/2018
This is the 10th order I have made from etrailer.com, most of them with multiple items. I cannot say enough about what great experiences I have had with etrailer.com. The website is incredibly helpful, the search tools are great, and the specs, videos and other information are very helpful. The items always ship right away, and arrive well packaged and promptly - and for me they have to cross the border to Canada. I recommend this site to my friends with trailers and I would recommend it to anyone who wants a great experience - and who doesn’t!
by: Jack S.06/20/2011
Fit my application perfectly - I wanted more space between the tow vehicle and trailer jack so that I could open my tailgate with the trailer attached. Gave me just enough clearance. Shipping was fast, service was great - thanks etrailers!!
by: John08/15/2012
Having searched and not finding what I wanted or perhaps not really knowing what I wanted, I called and talked to Cathy. She was very helpful and knowledgeable. She checked and guided me to a longer shank which will give me a longer turning radius, as the tongue on my trailer is short and is a problem. The unit is a solid piece of equipment. I had a clevis pin from a 1 1/4" shank and thought I would use that and not order another and she advised me that the pin for a 2" shaft is larger and I needed a new one. She was so good and accommodating I even asked for her boss to commend her for her good work and pleasant personality. Jlw
by: Clint R.12/09/2014
Well made heavy duty trailer hitch ball mount just what I needed
so the tailgate would clear the jack stand
by: Lee09/10/2019
Top-notch product. Just completed a 1400 mile trip pulling a trailer with my Chevy Equinox and my etrailer hitch: issue free! That's the best
by: Billy Elkins Blair,OK03/09/2011
I was throughly pleased with etrailers quick response and fast shipping.The ball mount I ordered was packaged well,and was good quality.I think I have found a good source for my towing-trailer needs.I'll admit there are not too many moving parts on a ball mount,but they got the job done and treated me right.
Big thank you too everybody at etrailer,
Billy Elkins
by: Bjoe05/03/2015
I have a Toyota Tacoma pulling an A-Liner Expedition. Used a Ball and Ball mount from Wal-Mart last year. I upgraded to this and heavier rated Ball, and we noticed an immediate difference.
E-Trailer staff, keep doing what you are doing. Your company and products have just earned a loyal customer. Thank You!!
by: Del Sparks05/14/2015
It is too large to slide into the 2" receiver. I may have to grind off some of the coating ti get it slide in and out easily. There was no pin with the hall mount so I will have to get one.
by: Richard09/06/2019
Received quickly. Happy with unit. The extra length is helpful for backing the trailer into tight areas by keeping the trailer a little further from the truck bumper.
by: Gerald 02/09/2021
WORKS GREAT TAILGATE NOW CLEARS TRAILER JACK
by: Todd C.04/14/2017
Received this Trailer Hitch Ball Mount just as described. Just what I needed. Great workmanship.
by: Conrad 09/20/2018
Great fast service.
The new one I purchased is a 10-1/4" long. My original was 8-1/2". I have a travel trailer and had a heck of a time turning with the 8-1/2". The new 10-1/4" made all the difference. I can turn the trailer without any issues. It has the same rating as my 8-1/2" also. Works great.
by: Jon J.04/29/2016
Fits the Subaru XV Torklift "EcoHitch Invisi" hitch perfectly.
by: David 09/10/2022
After I cleared the rust from the bolt holes on the trucks frame (had to chase the threads with a tap) the installation was a snap.
25
116
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Comparing Class III Receiver for 2012 Subaru OutbackDraw-Tite #75673 has 7 inch distance between the receiver hitch pin hole and the furthest rearward portion of the rear bumper when installed on a 2011 model Subaru Outback Wagon. Although the hitch will attach to the vehicle using existing holes in the frame, a 1-1/8 inch hole saw will be needed to drill an access hole in the frame member on both the driver and passenger side. This hole is necessary in order to feed installation hardware into the frame as shown in the install instructions...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2007 Dodge Grand CaravanA step bumper hitch cannot be used on your 2007 Dodge Grand Caravan. For a Class III hitch I recommend the Draw-Tite # 75305. Then for wiring you will need the Tekonsha T-One Vehicle Wiring Harness # 118300. If you're also in need of a ball mount you can use the # D-4 along with the # 63845 for a 2" ball or # 19260 for a 1-7/8" ball.
view full answer... - Does Curt Trailer Hitch # C13120 Contact the Exhaust on a 2012 Kia Sportage SXFrom what we have learned, if you have an SX Turbo model 2012 Kia Sportage, there is some exhaust contact. There are a few different things you can try to reduce or eliminate rattle if it happens at all. I have included a link to an FAQ article that covers the various methods. I have also included a link to the installation instructions for you. If you plan on doing some towing, the recommended parts are: Ball mount, # D-4 Pin and Clip, # PC3 1-7/8 inch ball, # 19260 2 inch ball, # 19247 2-5/16...
view full answer... - Trailer Hitch, Wiring, Ball Mount, Hitch Ball and Bracket Recommendation for a 2012 Hyundai Santa FeMy recommendation for trailer wiring for your 2012 Hyundai Santa Fe with factory trailer wiring package would be the Replacement OEM Tow Package Wiring Harness, # 118258. Keep in mind that this harness is a replacement harness and, if your vehicle did not have the factory connector installed when it was new, you will need to access the tow package connectors and check them with a circuit tester, like part # PTW2993, to be sure that the wiring is complete on your vehicle. If you find that...
view full answer...
- How to Determine if 2014 Ford Explorer Has Factory Tow PackageThe best way to determine if your Explorer is equipped with the tow package is to check with your Ford dealer. They should be able to run the VIN and be able to tell you exactly how the vehicle was equipped. I'm assuming you're needing the information to determine the towing capacity of your Explorer. I ran the provided VIN through a Ford VIN decoder, and found that your particular vehicle has the higher of the 2 listed towing capacities at 5000 lbs which would lead me to believe that...
view full answer... - Recommended Ball Mount for EcoHitch 306-X7257 Class III Hitch Installed on 2017 Subaru WRXWhen we installed the EcoHitch # 306-X7257 on a Subaru WRX, we found that the receiver sat right at 17 inches in height. I'd recommend going with the # D-4 ball mount, and Hitch Pin and Clip, # PC3, with # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch drop. For a trailer wiring harness, use # C56259. Once the trailer is hitched up, the trailer's tongue weight will cause the rear of the WRX to settle a bit, which would put the ball height at about 17 inches which will be perfect for...
view full answer... - Trailer Hitch Recommendation for Towing Small Utility Trailer w/ 2016 Toyota TacomaI'd recommend the Curt Class III hitch, part # C13264, as it is the most reasonably priced (yet still strong) hitch fit available for your Tacoma. Since you'll be towing with your Tacoma, you'll need a few other items to complete your towing system: Trailer wiring harness, part # 119178KIT Ball mount, part # D-4 Hitch Pin and Clip, # PC3 1-7/8 inch trailer ball, part # 19260 or 2 inch ball, part # 63845 If you click the provided links, you can see install videos for the hitch and the...
view full answer... - Is Spare Tire Accessible After Installation of Draw Tite Hitch 75132 on 2002 Ford Explorer 4-DoorThe full-size spare tire on your 2002 Ford Explorer 4-Door 4WD will remain accessible after you install Draw-Tite Class III hitch # 75132. I confirmed this with my technical contact at Draw-Tite. I have linked for you the written install instructions as well as a helpful article with tips for an easier hitch installation. If you need a 4-pole wiring harness you can use Tow Ready # 118344 or if you have the tow package use part # HM11140335. For a ball mount use part # D-4, Hitch Pin and...
view full answer... - Will Installing Curt Class III # C13513 Interfere with Spare Tire on 2006 Kia SorentoThe presence of the hitch will prevent the spare tire from dropping straight downward while it is being lowered. While lowering the spare, you will need to push forward on it until it clears the hitch cross tube, at which point it will drop free. We have the same situation on my wifes Kia Sedona van, and I can tell you from experience that it is not difficult to get the spare off of the vehicle. The procedure will just be a little different than you are used to. If you were planning on...
view full answer... - Will the Draw-Tite Max-Frame Class III Trailer Hitch Fit on a 2005 Mazda Tribute SI verified with my contact at Draw-Tite that the Draw-Tite Max-Frame Class III Trailer Hitch, # 75751, will fit all models of the 2005 Mazda Tribute. The only issue that you may run into will be with the wiring harness. There are two wiring harnesses available for your vehicle. If your vehicle came with a factory tow package, then you can use the Hopkins Custom Fit Wiring Harness, # 40455. If you do have the factory tow package, then you may need to may need to see a local Ford dealership...
view full answer... - Trailer Hitch And Weight Distribution Recommendation For 2008 Acura MDXI did some research and you are correct that the maximum towing capacity for your 2008 Acura MDX is 5000 lbs. The hitches we offer for your vehicle are all Class lll hitches and rated for towing weight capacity of 4000 lbs with a tongue weight capacity of 400 lbs unless you are using a weight distribution system. I recommend the Draw-Tite Max-Frame Trailer Hitch, part # 75614 for your MDX. If a weight distribution system is used the gross towing weight is 5000 lbs and the tongue weight...
view full answer... - Can Fascia Door of 2011 GMC Terrain Be Reinstalled Once Hitch is InstalledAll of the Class III receivers available for your 2012 Terrain are similar in the way they would sit in relation to the rear bumper of the vehicle. The Curt # 13591 and the etrailer # e98865 are basically the same hitch, they have the same capacites and look the same. The primary difference between the Curt # 13591 and the etrailer # e98865 is the finish. The etrailer model has a Matte black finish, while the finish on the Curt hitch has a shinier finish. This is really a matter of...
view full answer...
- Does Curt Ball Mount D-4 Have Same Capacity in Rise and Drop PositionYes the Curt Ball Mount # D-4 has the same weight capacity when used in the rise and drop position.
view full answer... - Trailer Hitch Recommendation for 2016 Ford Escape 2.0L TitaniumOne of the sensors for the hands-free liftgate system on your Escape is located right behind the center of the bumper, meaning that ANY hitch installed on the vehicle will restrict the functional area of the sensors to some degree. Unfortunately, this is unavoidable. My Draw-Tite representative tells me that the # 75782 will interfere less than the # 75758. This is good news because the crossbar of the # 75782 would be mainly concealed behind the rear bumper, while the # 75758 would be...
view full answer... - 2015 Audi Q5 Trailer Hitch RecommendationThe trailer hitch part # 75940 that you referenced has been confirmed as a fit for your 2015 Audi Q5 so I would recommend it for you. For trailer wiring you would need part # 119250KIT. Since you'll be towing with your hitch, you might need the following to complete your towing system: Ball mount, part # D-4 Hitch Pin and Clip, # PC3 1-7/8 inch trailer ball, part # 19260 2 inch trailer ball, part # 63845
view full answer... - Fit of Carpod Cargo Carrier # M2200 on 2012 Jeep Grand CherokeeAlthough the Carpod Cargo Carrier is a great product, its shorter than usual shank (4 inches) would prevent it from being used in any of the receivers offered for your 2012 Grand Cherokee. When we have installed the Draw-Tite and Curt hitches on a 2012 Jeep Grand Cherokee, we have found that the distance from the receiver hitch pin hole to the furthest rearward portion of the bumper is typically 4-1/4 inches. The short shank of the Carpod would not be able to slide into the receiver...
view full answer... - How to Equip 2019 Toyota Highlander for TowingThe Curt hitch # C13200 you had looked at is a good choice, unless your Highlander has aluminum wheels, in which case that particular hitch would not be a fit. For a trailer wiring harness, use part # 118449. As you can see in the provided installation instructions and install video, the harness uses two parts. One piece installs under the dash, the other near the liftgate in the cargo area at the rear of the vehicle. You'll also need a ballmount and a trailer ball, I'd recommend the #...
view full answer... - Recommended Trailer Hitch and Trailer Wiring Harness for 2014 Subaru OutbackAlthough the Draw-Tite # 75673 is certainly a fit, you might also consider the Curt # C13410. Both are class III hitches, but when installed the Curt hitch is mostly concealed behind the bumper, as opposed to the Draw-Tite which is fully visible. This adds some complexity to the installation for sure, but once installed it looks much better. For a trailer wiring harness, use the # 118467 from Tekonsha. A ball mount like # D-4, Hitch Pin and Clip, # PC3, and a trailer ball ( # 19260 for...
view full answer... - Recommended Draw-Tite Class III Trailer Hitch and Towing Supplies for 2012 Chevy Traverse LSI'd recommend the Draw-Tite Class III receiver hitch, part # 75528. The hitch has a towing capacity of 5000 lbs which would be able to accommodate your pizza oven trailer with no issue. You'll also want to add a trailer connector, part # HM40975 which will mount to the tab on the hitch for a professional looking installation. You'll also need a ball mount like part # D-4 and a trailer ball like # 63845 for a 2 inch or # 19260 for a 1-7/8 inch ball. You'll also need a # PC3 hitch pin.
view full answer... - How to Determine the Correct 2 inch Ball Mount for My 09 Volkswagen Toureg?Yes, the Ball Mount 3/4 inch Rise or 2 inch Drop, 6,000 lbs, item # D-4, is the recommended ball mount for your 2009 Volkswagen Toureg. The best way to determine the correct ball mount for your vehicle and trailer combination is to measure from the ground to the top of the receiver tube on the vehicle, and from the ground to the bottom of the trailer coupler, with the trailer level. If the hitch height is greater you will need a ball mount with a drop equal to the difference and if the...
view full answer... - Trailer Hitch Fit Recommended for 2018 Hyundai Long Wheelbase Santa FeFor the 2018 model year, the short wheelbase Hyundai Santa Fe was referred to as the Santa Fe Sport, and the long wheelbase models sometimes referred to as the Grand Santa Fe were simply called the 'Santa Fe'. Therefore, the Draw-Tite # 75772 hitch you'd looked at won't be a fit for your long wheelbase model. For the long wheelbase model, I'd recommend the Curt Class III hitch, part # C13153. If you'll be towing with your Santa Fe, you'll also need a trailer wiring harness like # C56332,...
view full answer... - Curt Hitch Recommendation for a 2012 Kia Sorento that is Compatible with a Full Size SpareThe Curt Hitch # C13073 is compatible with your vehicle and allows a full size spare to be used when in installed. Check out the picture I attached that shows this hitch installed on a vehicle similar to yours and a full size spare underneath the rear of the vehicle. I attached installation instructions and an installation video for this product for you to check out also. To complete your towing setup you may be interested in the following products: Curt Custom Fit Vehicle Wiring # C56328...
view full answer...
- Hitch Ball Recommendation for Curt D-4 Trailer Hitch Ball MountYou will need a ball that matches your trailer coupler. The required ball size should be stamped into the top of the coupler. For a 1-7/8 inch ball you will want hitch ball # 19260. For a 2 inch ball you will want # 63849. For a 2-5/16 inch ball you will want # C40007. I have included a FAQ article on choosing hitch balls for you to check out.
view full answer... - Comparing Weight of 1-1/4 Inch Receiver to 2 Inch Receiver for 2020 Honda CR-VFor your 2020 Honda CR-V, the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36597 has a shipping weight of 24 lbs and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13397 has a shipping weight of 30 lbs. Even with a towing capacity of 1,500 lbs. I still recommend using the 2 inch receiver because there are more accessory options and sometimes more cost efficient options using that receiver size. For instance the # 36051 is recommended for the...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Cole B
Installed by:
Adam E
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
5/11/2023
There are some ball mounts that do include the hitch pin and the ball with them, like kit # 989900. If you were not needing a ball and wanted to get a kit with just the pin and clip included with the ball mount, we do have part # 2923.