Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
(1992 reviews)
Price: $28.90
In Stock
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
Item # C45015
Retail:$57.03
Our Price: $28.90
You Save: 49%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1992)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45015
- Fits 1-1/4 Inch Hitch
- Fixed Ball Mount
- Rise - 5 Inch
- No Ball
- 3500 lbs GTW
- Class II
- CURT
- Steel Shank - Gloss Black
- 3/4 Inch Ball Hole Diameter
Corrosion-resistant ball mount is 11-5/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.
Features:
- Sturdy, steel construction
- Corrosion-resistant, black gloss powder coat finish
- High-quality manufacturing process
- CNC machined for strong, consistent cuts and welds
- 7-Stage washing method delivers smooth, clean surface
- Drawbar can be used in rise position only
- Hitch pin and clip or hitch lock sold separately
- Assembled in USA
Specs:
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Class II only
- Gross towing weight: 3,500 lbs
- Tongue weight: 350 lbs
- Ball hole diameter: 3/4"
- Length: 11-5/8" from center of hitch pin hole to center of ball hole
- Rise: 5" from top of inside of hitch opening
D-223 45015 Curt Ball Mount - 1-1/4" - Class II
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Package not accepted
- Did not arrive in time
Customer Reviews
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs - C45015
Average Customer Rating: 4.8 out of 5 stars (1992 Customer Reviews)
Corrosion-resistant ball mount is 11-5/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.by: David 04/10/2024
I was in need of a hitch higher than the standard 3 or 4 inch riser and spoke with Samatha B, after a couple of emails she found a 5 inch riser for my 1 1/4" receiver. Just what I needed and a happy customer. Received very quick and good sturdy quality. Thanks again!
by: Troy09/27/2022
3.5 stars. Product looks like it should perform as advertised, but it arrived with several chips in the paint. This is most likely due to improper surface preparation and cleaning before the powder coat was applied. As you can see in the photos, there is already some surface rust on some of the areas, including the hole for the hitch pin. Ultimately the paint will get scratched up from use, but it would be nice to see some extra attention to detail from the factory.
by: Jason 09/08/2022
Works on a class 1 hitch. The computer flags it as a mismatch. The person on the phone was very helpful.
by: Nick S.03/16/2012
Here's 2 photos of the finished product. Doesn't stick out very far which is fantastic, because it definitely would have looked bad on the back of a 2 door coupe GTP. As for installation, being a mechanic, all I had to do was remove 2 rear exhaust rubber hangers and the one right behind the fuel tank, lower the exhaust onto a set of jacks to support the weight. Then drilled 2 1/2" holes with a 90 degree drill. The coiled wires included with the parts saved me tons of time trying to get the bolts in. Overall, it was fairly simple to install. Torquing the bolts proved a little difficult. I would recommend you inform the customers that they'll need at least a 10" eye to eye reciever (I have the 11" one on mine) in order to clear the rear bumper and provide some space between the bumper and trailer tongue. As for the wiring, I cut a small slit in the rubber plug under the spare tire, ran some bulk trailer wiring up through it, under the tire, under the floor matting, to the right side of the trunk, behind the tail light. And up under the lid on the right side, is the tail light wire harness/connector. Test light confirmed which wires were hot, tapped into them and all the wires and lights are good to go. Just some extra info for the DIY'er that might be handy on the website so they won't have to search for it! Couldn't be happier with the hitch.
by: Jim Black09/13/2016
Vehicle: 2012 Hyundai Elantra Touring (5-door hatchback).
Hitch: C11471 Wiring kit: Tekonsha 118473
Drawbar: C45015 Ball: C40018
See my previous review on the hitch. The wiring kit took longer than expected to install but went generally well.
The eTrailer instructions are good but miss what I consider to be a critical dimension. Note the picture with the ruler; the length of the drawbar must clear the rear bumper of the vehicle. The missing dimension is the distance from the center of the ball mounting hole to the rear of what I call the ball shelf. I now know that for my drawbar, this is about 3.5 inches; however, I did not know that when I ordered the drawbar and consequently ordered a longer drawbar than was required. I went by the distance from hitch pin to ball mount but had to guess whether it would clear my bumper which I knew needed at least six inches from the hitch pin center. No harm done but it would have been useful to know the distance from the ball hole center to the rear of the shelf.
My only problem is to get the torque on the ball nut to 160 lb-ft. My torque wrench does not go that high. I'll figure out something. Everything else is great!
by: Al V08/21/2014
I just bought a Land Rover LSII. I pull a travel trailer so I had the dealer install a hitch. I discovered that the hitch was very low and under the bumper. I could not find a drawbar that would stick out far enough and go high enough to allow me to hook up my trailer. Until I found your drawbar (C45015). As you can see by the pictures, it's perfect. Thank you.
by: Monte B.09/12/2013
This is a heavy duty full on class II hitch and it has the weight of quality. eTrailer shipped my order with professional speed.
Attached is a photo of it on my 2004 Honda Accord in its class I receiver noting that I have not yet fully bolted the hitch ball in this photo.
by: Becky04/29/2022
Love it, just be sure when attaching a ball, when parking un pin and store. Someone stole my pin, fortunately not the drawbar
Becky
4/30/2023
Happy I bought a locking pin, no more worries.
by: Jeffery04/20/2022
quality and fair pricing was what I was expecting and received. Very pleased with products from etrailer
Jeffery
4/21/2023
Everything has been perfect, installation and performance and quality of hitch was first rate.
by: Ed04/01/2024
Perfect fit.
by: Nancy W10/27/2016
A perfect solution. I bought a car with a much lower hitch mount placement.
by: Christopher 04/03/2023
Been a fan of Etrailer for a while now. They always have that extra clip/bolt/harness that other box stores just don’t get right. Found the price reasonable and the shipping speed FAST. Box was toast but who cares it’s a heavy piece of metal I’m going to paint match anyways. Thanks!
by: Sean S.05/24/2011
Here's the install on my 1995 E320 Mercedes Wagon. Thanks for double-checking and following-up on my order so efficiently. It was a good thing to get the long ball mount for a bit of extra clearance from the bumper.
by: Steve M.02/07/2014
I looked locally for a drawbar that would fit my 2001 Ford Taurus but couldn't find what I needed. Came to e-trailers where I've bought before and found this. They had a very wide selection. Perfect fit, great price, fast delivery. I would highly recommend this product and company.
Steve
by: Greg M03/10/2015
It is exactly what I was looking for,thanks to etrailer, only which I would of did it 5 years ago,but didn't know they made them 1.25 inches. Thanks again Greg
by: Delfin Octoman05/16/2017
Nice product and easy to install the "Draw-tite Max-frame Trailer Hitch Receiver" with T-One wiring harness for Factory Tow Package- 4 Pole Flat Trailer Connector...
by: Ralph E.06/29/2016
The Curt Class II Drawbar with a 5" rise very nicely solved my problem when hooking up my two trailers to my Rave 4. The trailer jack was as low as it could go when it rested on the ball in my of setup. Now I have plenty of jack room to hook up and unhook. Thanks for your excellent product and service.
Ralph E.
Ralph E.
1/17/2018
I still love your trailer hitch one year later! I know its very good because I dont think about it, its just there working for me whenever needed. Thanks.
by: John S07/19/2017
The hitch on my Sienna is mounted low and recessed under the bumper so this ball mount has been perfect for the right height and reach for my boat trailer to ride level. etrailer is the only place I found what I needed. Actually I always look there first because they have such a good selection.
John S.
7/19/2018
This ball mount is no longer needed for my boat since I now have a truck with a 2” ball mount but I still use it for my lawn mower trailer when needed behind my van. I can keep a 1 7/8” ball mounted on it. It is a solid piece of equipment.
by: Austin C06/01/2017
It works... the finish is horrible. Nicks and spots with no paint everywhere. If I didn't need it so soon I would return it! It wouldn't be as big a deal if it was a rust proof metal, but it's not.
by: Joseph04/01/2018
unit worked perfectly, I got the extended elevated ball mount for the receiver and worked perfect. after a while I found that I needed to back out of steep driveways slower so the receiver did not hit the ground. one thing that helped was replacing my original rear struts with an upgrade set. I needed to after 200,000 miles anyway. The wiring kit with your videos was easy and great.
Joseph
4/1/2019
Really good, useful and functional, pulled a few trailers hauling mulch and such.
by: Robert R.09/10/2016
Received the products a couple of days earlier than expected that was great! The product(s) Drawbar and Ball, were more than expected. They are very well made, heavy duty steel and well built. It towed my small boat/utility trailer with ease. I would recommend these products. Robert R.
Robert R.
9/10/2017
Still working well and no signs of minor or major wear and tear. Robert R.
by: Billy R.09/15/2014
My second or third purchase from E Trailer and as usual I'm super satisfied. With the 5" rise on this drawbar, the trailer finally sits proper and makes it easier to load and unload the bike from the trailer. Great item! Great customer service!
Billy R.
9/23/2015
Im still loving my E Trailer Drawbar. The new height makes towing a cinch! Love the customer service as well.
by: The Annapolitan Gadfly03/29/2019
This extra-long, 1-1/4" trailer ball mount is designed with a graceful curvature resembling the neck of a swan. The trailer mount had the perfect reach & rise that I needed for my small, garden tractor fitted with a rear PTO.
I congratulate etrailer.com for having this uncommon part directly from their stock into my hands so speedily.
This was not my first fully satisfactory transaction with etrailer.com, and it certainly won't be my last! My thanks to all the staff at etrailer.com for such great products and service.
25
1986
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Ball Mount For a 2013 Chevy Camaro with 1-1/4 HitchYou are probably OK but if you are anything like I am it would be too close for comfort. I wouldn't want to take a chance at potentially causing any damage to my fascia. I recommend the Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs Item # C45015. The hitch on your vehicle is 8-1/2 inches from the center of the hitch pin hole to the outer most part of your fascia and 9-3/4 from the ground to the top inner most part of the receiver tube. This ball mount has an 11-5/8" long shank...
view full answer... - Does Curt Ball Mount # C45015 Have Clearance with Curt Hitch 2012 Chrysler Town and CountryFrom the center of the hitch pin hole of the Curt ball mount part # C45015 to the back of the ball mount platform measures 8 inches. This would easily have enough clearance with the Curt hitch part # C12264 you have installed on your 2012 Chrysler Town and Country.
view full answer... - Curt Class II Euro Style Drawbar # C45592After speaking to my contact at Curt, I found the most height extension you can achieve with the Curt Class II Euro Style Drawbar # C45592 for your 2011 Volkswagen Golf is with the Curt Class II Drawbar # C45015. This is a 5-inch rise drawbar which provides a total height increase of 2 inches for any cargo you would tow with your vehicle.
view full answer... - Upgrading to Class III Hitch for Towing 3000 lb Boat with 1997 Chevy S-10You can see the various hitches available for your vehicle by clicking on the provided link. Use the drop down menu to choose the bumper style of your S-10. The Class II hitch for a 1997 S-10 has a 3500 lb towing/300 lb tongue weight capacity, while the Class III has a 3500 lb towing/350 lb tongue weight capacity. You can certainly change to a Class III if you wish, but you will only realize a 50 lb increase in tongue weight. I would recommend you determine the fully loaded and ready...
view full answer... - Curt Ball Mount for 1-1/4 inch Hitch with More Rise and Length than C45520The two Curt ball mounts you mentioned of part # C45014 and # C45015 are both options that would give you additional rise with the # C45015 being a few inches longer as well than compared to the # C45520 that you have now. Now these options only can be used on Class II hitches whereas the # C45520 can fit Class I or Class II so you'd need to verify that with the hitch of your vehicle. The reason for this is that the Class I hitches are lower in capacity so they can be only used with the...
view full answer... - Will Curt Drawbar Clear Bumper On 2004 Chrysler Town And CountryThere is an easy way to make sure you clear the bumper on your 2004 Chrysler Town and Country. You will need a tape measure and a straight edge like a yardstick or a dowel. Hold the straight edge vertically against the rear bumper, making sure it extends below the hitch opening. Then just measure from the center of the hitch pin hole to the straight edge. This gives you the distance you need to clear the bumper. The Curt Class Drawbar, part # C45014, measures 9-5/8 inches from the center...
view full answer... - Recommended Drawbar for Volvo 2001 V70 XCWidth usually isn't a consideration when it comes to choosing a drawbar. Folks are typically concerned about getting a drawbar that places the trailer ball at the proper height so the trailer is level when it's being towed. I'll link you to our FAQ article about ball mounts/drawbars. If by width, you're speaking of the hitch receiver size the drawbar is meat to fit into, the hitches we offer for the 2001 Volvo V70 are Class II, which use the 1-1/4 by 1-1/4 receiver (inside dimension of...
view full answer... - Long Ball Mount for Class II Trailer Hitch Receiver on a 2006 Jeep Grand CherokeeThe longest ball mount we carry to fit a Class II, 1-1/4 inch hitch receiver is the Curt # C45000. It's 13-1/2 inches from the hitch pin hole to the ball hole. However, it only provides 3-7/8 inches of rise and cannot be used in the drop position. Much less than the Brophy # BM96 you have. It does have the same 3/4 inch ball hole diameter as the Brophy. Another option that may work is the Curt # C45015 that's 11-5/8 inches long. It can't be used in the drop position either but does...
view full answer... - Trailer Hitch that Fits 2007 Audi A3 for Motorcycle TrailerFor lighter duty vehicles like a 2007 Audi A3 there are only lighter duty hitches available like the Curt # C11192. Only way to use this as a tow vehicle will be to tow a small trailer which will also require lighting like the part # 46255. Even if a heavier duty hitch was made for the vehicle the vehicle itself wouldn't be able to handle the weight of the bike and carrier unsupported. The correct ball mount to use would be the part # C45015 as well.
view full answer... - Is the Material of Curt Class II 1-1/4 Inch Hitch # C45015, Solid Steel or Tubular SteelThe Curt Class II 1-1/4 Inch Ball Mount, part # C45015 has a solid steel shank. It has a 5 inch rise and measures 11-5/8 inches from the center of the hitch pin hole to the center of the ball hole. The other choices I have for a 1-1/4 inch ball mount with a 5 inch rise is the Curt Class II 1-1/4 Inch Ball Mount, part # C45014 which is 9-5/8 inches long and the Draw-Tite Class II 1-1/4 Inch Ball Mount, part # 36065 which is 10 inches long. Both of those ball mounts will also have solid...
view full answer... - Long Shank Ball Mount With High Rise for 1-1/4" Hitch on 1967 VW Double Cab TruckThe Ball Mount 3/4" Rise or 2" Drop, Extra Long # D-26 is for a 2" receiver so it physically won't fit your 1-1/4" receiver so instead you'll want to look at something like the Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs # C45015 which gets you within 1" of the rise you mentioned. You can then add a hitch ball like the Convert-A-Ball Interchangeable Ball Set # 800B which gives you the ability to tow a trailer with either a 1-7/8" or 2" hitch ball. Attached are some review...
view full answer...
- Custom Trailer Hitch Adapter For Chevrolet Malibu from 1-1/4 hitch to 2 ReceiverMy recommendation is to have a custom adapter made for the height and length that you need on your 2010 Chevrolet Malibu with the Draw-Tite Trailer Hitch Receiver # 36479. The center of the hitch pin is about 8-1/2" from your rear bumper. Any adapter that goes from a 1-1/4" receiver to a 2" receiver will reduce the weight capacity of the vehicles receiver by 50%. Be sure to verify your vehicle and hitch ratings to determine if you will have enough capacity for what you intend to haul. The...
view full answer... - Ball Mount For Thule Velospace XT3The Thule Velospace xt3 requires a 50mm Hitch Ball # EH53C-C. If you have a 2 inch hitch receiver you will need a mount like this one # BH20 or this one # C45015 for an 1-1/4 hitch.
view full answer... - Ball Mount Compatibility with Class I Trailer Hitch Receiver on 2010 Ford MustangThe Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11048 is compatible with the Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs # C45015 you referenced. You will also need a hitch ball like # 19256 for a 1-7/8 inch diameter or # A-82 for a 2 inch diameter. For trailer wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118487. This will connect behind your tail lights and then draw power directly from your battery....
view full answer... - Trailer Hitch Ball Recommendation for Curt Ball Mounts C45015 and C45014For a 1-7/8 inch hitch ball to use with the # C45015 or the # C45014 you would want the part # A-80. For a 2 inch hitch ball you would want the part # A-82. Both of these have a 3/4 inch diameter shank that is 2-1/8 inch long.
view full answer... - Hitch Lock and Anti-Rattle Device Recommendation for Curt Ball Mount # C45015Since the shank of the ball mount part # C45015 is solid you'd have to go with a standard hitch lock like the part # TR63254 which will work well. Then for an anti-rattle device you'd want a universal kit like the part # RM-061-125.
view full answer... - Will Curt Class II Ball Mount Fit into Draw-Tite Class I Trailer Hitch ReceiverI just went out to our warehouse and installed the Curt Class II Ball Mount # C45015 into the Draw-Tite Trailer Hitch Receiver # 24796 and it fit perfectly. The Curt is 11-5/8 inches from the hitch pin hole to the hitch ball hole so it will work great for you. For a 2 inch hitch ball use # 19258 and for a 1-7/8 inch ball use # 19256. Then for a pin and clip use # F-4.
view full answer... - What Solution Do You Have to Transport 1 SUP and 3 Kayaks On a Hyundai Kona?I have an option for you. For the combination of watersport accessories you want to transport, a roof rack solution is not possible. While the Hyundai Kona's owner manual does not recommend to use the vehicle for towing, the only option for two sit-in kayaks, one above-sit kayak, and a paddle board is the Malone MicroSport Trailer with Post Style Carriers # MAL24ZR. The MicroSport trailer will take away the headache of how to position/stack the paddleboard and kayaks on a roof rack system....
view full answer... - How to Find Rise/Drop of Ball Mount Needed for Towing Small Aluminum Boat with 2007 Acura TLWhen we installed the Draw-Tite # 24755 Class I hitch on a 2007 Acura TL, we found that the inside top edge of the receiver tube sat 10-1/2 inches above the pavement. To determine which ball mount would place your trailer as close to level as possible, you'll need to put the boat trailer up on it's jack so it's level, then measure from the bottom edge of the coupler to the ground. The height difference between 10-1/2 inches and the level trailer coupler height equals the amount of rise/drop...
view full answer... - Will Curt Trailer Hitch Fit 2011 Audi A3 TDI S-LineI went ahead and verified with the manufacturer for you that the Curt hitch will indeed fit your 2011 Audi A3 TDI S-Line with the Sport package; the correct part number for the hitch is the following: - Curt Trailer Hitch Receiver # C11192 The Curt # C11192 will fit your Audi and is nice because the crosstube is entirely concealed so that the only thing showing is the receiver, helping your A3 keep its factory appearance. If you plan on using this for just an accessory like a bike rack,...
view full answer... - Can I Haul A Trailer With 2 Motorcycles With My 2012 BMW Series I With Class I Hitch?On your 2012 BMW Series 1 your only option is the Curt Class I 1-1/4 inch hitch # C11184 which has a max tongue weight of 200lbs and a max gross trailer rating of 2,000 lbs. So, you could potentially haul your two motorcycles on your trailer but there are some things we need to make sure of. First make sure that your vehicle can handle that weight. The hitch may be able to, but you need to confirm your vehicles limits. Usually you'll find it in your owners manual. Then we need to make...
view full answer... - Ball Mount Recommendation to Clear the Back of a 2007 Chevy HHRIf you were to use ball mount # C45014 on your 2007 Chevy HHR it would be very tight so I do recommend going with the longer # C45015. If you have or are looking at hitch # C11447 then the ball mount that Curt recommends is # C45520 which is about the same length as C45015 so it would also have enough length. For either ball mount if the trailer takes a 2 inch ball use # C40018. And if it takes a 1-7/8 inch ball use # C40001. And if you don't already have a trailer wiring harness you can...
view full answer... - Recommended Trailer Hitch For 2013 Chevrolet CamaroUnfortunately the only trailer hitches we have that are designed to work with your 2013 Camaro are Class l hitches. Class l hitches have a weight capacity of 200 lbs. You would want to check the owner's manual for the tow rating of your Camaro. I cannot recommend a trailer hitch for your Camaro that can handle the weight of your bike at 225 lbs, but if you do not have the ground effects package and you wish to tow a small motorcycle trailer behind your Camaro I recommend the Draw-Tite...
view full answer... - Roof Rack Options for Loading 2 Kayaks onto a 2018 Honda Civic 4drThe first thing to look at is the roof capacity of your vehicle. The combined weight of the rack, 2 kayak carriers, and a pair of 64 pound kayaks is a concern. I confirmed the roof capacity is 110 pounds on the 2018 Civic Sedan. A better option and my recommendation is carrying your 2 kayaks on a Malone MicroSport Trailer designed for 2 Kayaks # MPG461G2. If you don't already have a tow package or hitch on your Civic, it requires a tow hitch like the Curt Trailer Hitch Receiver #...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jeff D
Expert Research:
Jameson C
Written by:
Lindsey S
Video Edited:
Jacob T
Video by:
Dustin K
Video by:
Chris R
Installed by:
Cole B
Installed by:
Adam E
Installed by:
Bradley B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jason
9/9/2023
Like the above review. This is flagged as a mismatch. It will work fine.