Ball Mount For a 2013 Chevy Camaro with 1-1/4 Hitch
Question:
How much space do I need between the ball and my back bumper for a standard ball coupler like you would find on a uhaul trailer? I only have an inch or so between the two on my setup and I am curious if that is okay.
asked by: Kaileb
Expert Reply:
You are probably OK but if you are anything like I am it would be too close for comfort. I wouldn't want to take a chance at potentially causing any damage to my fascia. I recommend the Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs Item # C45015. The hitch on your vehicle is 8-1/2 inches from the center of the hitch pin hole to the outer most part of your fascia and 9-3/4 from the ground to the top inner most part of the receiver tube. This ball mount has an 11-5/8" long shank and a 5" rise. It will give you 2 inches of space between you fascia and ball and 13 inches from the ground which is what we recommend.
Product Page this Question was Asked From
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Continue Researching
- Video: Curt Class II Drawbar Review C45015
- Search Results: trailer light harness
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2017 Ford Fusion
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Q&A: Recommended Euro Style Drawbar with 7 Rise
- Q&A: Recommended Euro-Style Ball Mount for a 2015 Nissan Altima with Curt Class I Trailer Hitch
- Q&A: How is the Rise Measured for Curt Euro Style Ball Mounts
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Shop: Kenda K353 Bias Trailer Tire - 4.80-12 - Load Range C
- Shop: Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt Ball Mounts - Fixed Ball Mount - C45015 Review
- Q&A: Ball Mount Compatibility with Class I Trailer Hitch Receiver on 2010 Ford Mustang
- Q&A: Is the Material of Curt Class II 1-1/4 Inch Hitch # C45015, Solid Steel or Tubular Steel
- Q&A: Draw-Tite vs EcoHitch Trailer Hitch Receiver for 2018 Chevy Bolt EV
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch wiring
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Crosstrek
on Trailer Hitch Ball Mount
