Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Sturdy steel anti-rattle ball mount with a threaded hitch pin hole and solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.
Features:
Specs:
Average Customer Rating: 4.9 out of 5 stars (305 Customer Reviews)
Sturdy steel anti-rattle ball mount with a threaded hitch pin hole and solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.
Very handy for getting a level hookup with aftermarket hitch kits, which often put the receiver far too low. The 5-1/2" rise is just right to pull U-Haul and Home Depot trailers behind my Audi A6 sedan, and the extended tongue clears the bumper with room to spare. This unit is extremely ruggedly built, with nice fat welds and a sturdy reinforcing gusset, and the anti-rattle feature works perfectly.
Good quality
Other than getting most of the paint knocked off of this while in shipping from a loose ball inside the shipping box, it's a very impressive drawbar. The solid square bar that goes inside the receiver makes this much better than any 2" drawbar I've ever had. This thing is seriously heavy! I might not even keep this in the car until it's needed. With the ball, it weighs about as much as my small toolbag
Haven’t installed it yet but the welds appear super thick and the unit is HEAVY. I’m impressed so far.
The hitch looks good. It is what I ordered. Two Days! I have to say that I will definitely be recommending etrailer if it comes up.
Good solid hitch great shipping
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system.
Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect.
Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
Purchased a vehicle with a class 2 factory hitch installed. This was the proper drop to haul my band trailer. First trip went without an issue.
Received the Class II Drawbar 5-1/2" Rise or 6" Drop - BM96
in a timely manner. The rise was what I was looking for to use with my Polaris ATV 570 since its standard receiver is 1-1\4 hitch and sits low to the ground. This was just the right height to pull my john boat behind the ATV.
Excellent service, very professional, parts were exactly as described.
Perfect hight for my kayak trailer, well built, used it from Sonoma County California to Gold Beach Oregon towing a U-haul worked great!
I love the ball-mount. Now I can haul my boat out to the lake. The best part of everything is - I got my package days earlier then expected. The service I received was great. Overall I am very happy with my purchase
The draw bar is absolutely perfect! all other internet and local hitch installer contacts said no one makes a 1 1/4" draw bar with a 6" drop. first picture is my original draw bar with a 2.5" drop. the trailer was running quite high. number 2,3,4 are with your Brophy draw bar you can really see the trailer is level.I took a measurement that may come in handy in your files. my car is a 2012 ford escape with a factory trailer package . The measurement from the center of my receiver to the ground is 18"1/4" trailer tires are 5.30x12 This is my new car and I was surprised at the height. the Ford dealer was no help so possibly you can supply other 4 wheel drive escapes with draw bars.
I bought this product to replace one that didn't have enough rise. On small cars such as a Nissan Versa, the hitch assembly is lower to the ground which can cause your trailer to ride low in front and high in the back. Adding weight toward the tongue only compounds the problem. I had a 4 inch rise which was not sufficient. BM96 gives me an extra 1 1/2" of height. I haul a 26hp 54" cut Husqvarna on a 5' X 10' tilt back trailer from "Old Reliable" One other point to mention. If your trailer rides low in the front and is fitted with a tongue jack, it can be difficult to lower it because the jack wheel can hit the ground in such a way that the jack can't be extended without lifting the tongue. BM96 gives the the extra height I need and solved my problem. This item fit perfectly and required no modification. I would highly recommend this if you need extra height!!
Expected my hitch to arrive in about 2 weeks. I got an email from etrailer saying they will upgrade shipping for free and received it in 2 days! Hitch is excactly what i am looking for. The paint was a little spotty on the hitch, but i could care less. It is a good solid hitch. I will turn to etrailer.com for all my towing needs.
etrailer is the only place I could find a 6" drop hitch for 1 1/4" receiver on my Polaris 570. I purchased a trailer on cl and needed a way to pull it evenly behind my four wheeler. I still had to mount the coupler on top of the tongue but that's no big deal. Service was great with immediate feedback once my order was placed and the delivery was fast. I would definitely do business with George again!
Bought this for my VW Jetta so I could haul my Kendon Dual motorcycle trailer because no hitch gave me enough rise. After installing a 2", 3/4 shank, 2 9/16 shank length ball secured and spaced with 6, 3/4 lock washers, I put it to the test. Loaded my Ferris 48" ZTR and away I went on the test run. Really impressed actually how little play there is in the 1 1/4 hitch. It's quite heavy solid no question.
Great product but would give 5 stars but installation in a Mazda cx-3 not as easy as advertised.
Item exactly as described and exactly what we needed, plus arrived quickly. Fit perfectly with our trailer hitch.
Extremely high quality hitch. I use the 6 inch drop option and tow a 6x12 enclosed trailer. Etrailer was very fast with shipping and I will definitely shop here again. I wish the shipping company took more care.
Product is great. Though we didn't have a lift to put on the trailer hitch, but after watching your video and few times it took maybe 2 hours and the next day maybe a half hour to add the wiring.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
11/19/2021
I would cover any nicks with anti-corrosive spray paint to make sure it lasts a long while without rust. Here is a help article explaining more:
Helpful Links
faq-rust-prevention-maintenance.aspx