Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your trailer door open while you're loading and unloading with this 4" T-style hook-and-keeper door holder. Stainless steel construction is rustproof and lasts longer than plastic holders. Mounting screws are included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up, everybody It's AJ with etrailer.com. Today, we're gonna be checking out this door holder from JR Products. It's gonna be stainless steel, it's gonna be four inches long, and what it's gonna do is it's gonna help you keep that door open when you're inside the trailer or working around it. Let's check it out. Checking out how it works, it's got the four-inch stainless-steel arm that's gonna hook into the catch here, and that's what's gonna keep the door in place. So as I bring the door closer to it, and I'm trying to stay outta the way so you can see it, it just goes in there.
The arm goes in the bigger portion there, slides back, and that's what keeps it holding in place. It's gonna be constructed out of a stainless steel, so you know it's gonna hold up on the outside of your trailer, The elements shouldn't bug it. It should last way longer and look nicer than the old ones, which are off there. Speaking on which, let's check out how we did that. Looking at the side of the trailer, you can see that our door hanger here has seen better days.
It's even missing some hardware, even some sealant on there on the backside, so make sure to replace that if that's what you're gonna go for when you go to replace your new one. Now we're gonna put our new door holder on there. So I'm gonna pop off these old ones here. Now, it does come with new hardware. We're not gonna use it this time.
That's more for if you wanna do it and install it in the doors to run it through. Our setup, we need the bolts to run through the other side and add a nut, so we're just gonna use the existing hardware because we need that long screw to put on there. So let's get started by removing the old stuff. So all I did was remove each one of the screws. There's gonna be four on each piece.
So I'm just gonna gonna back this off, last one, with our screwdriver. It's gonna release it, and that way, we can get it out the way to add our new stuff. So now we've got the new piece. I'm just gonna set that in the same place. All the holes line up. And we'll add the hardware. Our setup's a little different, like I said, because we're gonna put a nut on the backside. So I'm just putting the hardware in place first now. Now it's gonna be the same thing for this piece too. Run our bolts through. Once they line up. And then, I'm gonna get somebody to help me, and they're gonna hold the nut on the other side of the wrench while I tighten down this side with a screwdriver. Now I got it on there nice and tight. Let's see if the door latches. Now we're gonna open that door all the way. The door will latch. Looks like it's holding just fine. Overall, it's a definite improvement on our trailer. I mean, it looks better right out of the gate. Another thing would be that, since it's the stainless steel, it's not gonna rust, so I know that it's gonna last and look nice on the trailer for as long as it can. And I like these better than the plastic ones. You can get some of those that are between, like, white and black, and they're made out of plastic. And just looking at 'em, they don't seem as sturdy. They work, and they hold the door open, but I like seeing the stainless steel and knowing that it's gonna hold it in place and hold up. If the wind does catch the door, it'll pull on it a little bit tougher than it would. It's gonna hold up, and it's gonna keep that door open. Well, I think that does it. Thanks for hanging out, and I hope this helped..
Average Customer Rating: 4.8 out of 5 stars (110 Customer Reviews)
Keep your trailer door open while you're loading and unloading with this 4" T-style hook-and-keeper door holder. Stainless steel construction is rustproof and lasts longer than plastic holders. Mounting screws are included.Its hard for me to overstate the satisfaction I experienced with making this purchase. There may never be a greater sensation than this when ordering parts for a trailer. I greatly appreciate the prompt from etrailer, guiding me to an opportunity to expound on what I can only describe as a magical expericence.
Great stainless door hardware
The product looks like it will be a great replacement of the broken plastic hook.
Have not installed this yet but it is very nice looking and appears very well made. No doubt it will last much longer than the original equipment which was plastic. And came with new mounting screws as well!
I've had it installed for a year now. Works excellent!
I have an older enclosed trailer and the original door keepers were plastic. All three latches were broken or missing. It made sense to me to replace them with stainless steel ones. Installation was easy and they look fantastic!
A fine product, fast shipping and smooth transaction.
The original keeper hooks on my trailer were plastic and didn’t last long. The hooks I purchased from your company will last as long as I own the trailer.
I did have to make some adjustments to them but nothing major.
Nice replacement part.
works great
stainless steel is great, eliminates the rust issues
These were exactly what we were looking for to replace our existing yellow speakers. Perfect fit in our 2006 Kodiak Hybrid. Quick delivery and reasonable price.
Perfect replacement for the 17 year old plastic door holders. Holds the door in place.
They look great and fit as replacements to the rusting, original parts perfectly.
As described and shipped quickly! I bought these to replace the factory plastic ones that eventually broke. Thank you!
They work great and easy to install.
Easy to install and save$$$ headaches of swinging door
have not installed yet but very quick and pleasant people
It works but the metal is thin.
Haven't install yet and still not sure if I can use it yet but bought 2 in case it worked and I'd have a spare.
Kenneth W.
12/8/2022
Working Great!
Replaced gas cylinder that controlled door opening and which broke attachments and cylinders several times when the wind blew with this simple device. Works well and doesn't break in the wind. Winnebago learn a lesson.
Had all the parts I needed for my horse trailer in one spot. Received the shipment quickly. All top quality parts. Would recommend to anyone looking for parts for a horse trailer. Thank you.
High quality , no rust , heavy duty door holder for enclosed trailers !
I’m replacing plastic / nylon holders that had worn out . These are identical to the door holders on another high end featherlite trailer I have . The Stainless Steel finish is like it’s polished, no extrusion marks it’s Great Looking and should last a lifetime.
Product appears to be heavy duty and will do the job.
Will install this weekend
Great fit. I like the Stainless steel f inish.
Do you have a question about this Trailer Door Holder?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gregg
10/8/2022
So fAr so go. No problem with it