Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (301 Customer Reviews)
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.This was the exact part I needed. Very grateful to find such a reasonably priced replacement.
Good replacement
I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. My previous lights sat in the middle of the fender. These sit on the edge so you get a true picture of your edges at night.
Replaced the trailer fender signal light. Easy install on fenders.
Great product and replacement
Great and sturdy!
The parts were a perfect match for the old ones on my trailer as rocks and age took it's toll. I would buy again as shipping was fast, parts were right and had no hassles. I bought 2 tail lights and 2 fender marker lights. Thanks for the great job guys! I will buy from you again as needed.
Everything I expected! shipped quick, received quickly, install took minutes. Definitely will order from them in the future!
I needed a new fender and running light for my Wells Cargo cargo trailer after I had a tire blowout that ripped by right side fender off. The fender was basically a direct replacement. The running light was slightly different but installation was fairly simple. Shipping was super quick and the price was reasonable. I have never had a bad experience when dealing with the folks at etrailer. I highly recommend them and their services. Thanks.
A well made product and easy to install with a few self tapping screws. Having the 2 ground wires pre-wired to a common ring lug made the installation that much easier.
John
8/30/2019
Just great. No issues.
Driving to Alaska this summer I lost the tread on my 6'x12' cargo trailer in Canada destroying my drivers side trailer fender. etrailer sent a replacement up to me in Chugiak, Alaska that I installed for the drive back to Florida. The AlCAN Highway can be pretty tough on vehicles still today. I also needed to replace both trailer fender marker lights upon my return and had etrailer send me the exact ones I had lost on the trip. Almost 10,000 mile journey. Great prices, great service and fast /reasonably priced shipping. Extremely satisfied with etrailer in every way.
This was a universal fit for both right and left fenders if you change the lights around. I choose to remove the lights in the housing and install my upgraded LED lights that I had on the trailer. The part matches the older broken one perfect.
This was a universal fit for both right and left fenders if you change the lights around. I choose to remove the lights in the housing and install my upgraded LED lights that I had on the trailer. The part matches the older broken one perfect.
Our local repair and parts store could not find the proper lights for my trailer from their online connections. I was confused after spending ten minutes looking on the web to find etrailer might have the lights I needed, because, other sites displayed the part, but actually were out of stock and no longer were continuing the item. Admittedly, I ordered with little faith and waited for an email telling me the part was discontinued. However, to my surprise, the part arrived on time as promised exactly as I needed. Needless to say I am VERY pleased with etrailer. For giggles, I intend sending a link to my local store for the obvious.
I had a blow out on my trailer that took the fender which I replaced. Your marker lights were exactly what I needed so I purchased and installed both the left and right fender marker lights. Installation was easy. The heat shrink on all connections will insure that the lights will work for a long time.
great service, great selection and fair prices... only way I could be happier is to have found etrailer.com 5 years ago.
D
Darrell M.
8/7/2015
Worked great, great service a great find
Impressive size! Fits all the way to the outside edge of aluminum fenders for double axle enclosed trailer. Includes ground wire. Strongly recommend mounting with self locking nuts and bolts of stainless steel or chrome. Self tapping screws WILL work loose when mounted in aluminum sheet metal - guaranteed.
etrailer.com is a Superb Website to purchase good Trailer Parts.
I received Very Professional Service - coupled with quick shipping.
What more could I ask for?
Excellent product, quality, appeal, however, the plastic piece that protrudes out to cover the wires is about a 1/2" to short;it was not long enough for the lights to screw back into the right holes and cover up wire hole in fender. I used clear silicone to cover the part of the wire that was left uncovered.
First class quality construction better than the original equipment on my trailer. These lights were a direct replacement, no new mounting holes required. I couldn' t be more pleased with the product or the service. I'll be using etrailer.com for all my trailer needs in the future.
I ordered both the left and right side markers for my 05 Haulmark Trailer. The parts were shipped immediately and arrived within a few days. My old markers had lost the covers and failed to work properly. I installed these using my hardware and the look and work great.
Rewired my stock trailer and replaced all the lights with LED. Works and looks great!
I needed some fender lights and these guys fit perfect, quick delivery as well. The lights were easy to install, just plug them in, everything fit just like they were supposed to. Could not be happier with the item, sales staff, and service.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
10/24/2019
Still in great shape with no problems!