Hook and keeper door holder securely holds your RV or trailer door open. Constructed of durable plastic and measures 6" long. Includes mounting screws and rubber bumper.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a quick look at the JR Products Hook and Keeper for enclosed trailers. Now this is just a set to help you keep your door open on your enclosed trailer, especially if you're loading things in and out or maybe just coming in and going inside that enclosed trailer. You don't want to worry about having to open that door every time or have it come closed on you in a high wind and things like that. It's just going to be a wand and then a receiver portion. So as the door opens, it's going to catch that little wand and keep that in place.
Now this arm measures 6 inches long. There are several different configurations available here at etrailer.com. If you want to check those out, please do. This also comes with a bumper to help keep our door protected from banging into our receiver here.It's just going to help keep that spaced out a little bit further. This comes with it.
There are, as I mentioned, several others that have different lengths and there will be some others that have the bumper with them as well. This comes with all the hardware that you need to get it installed, including two extra long screws for that bumper since it does sit a little bit taller than our other ones. Typically you're going to be mounting this on one side of either your receiver or the base. The receiver is the part that the wand slides into the wand here and then the base is the part that the wand lives on. We'll also have the screws to mount each of those pieces in place, so pretty much everything you need to get this in place.
As far as our measurements, each of these is about the same size, just under 3 inches long, maybe 2 15/16 inches.And then just about 1 3/4 inches wide, and about 3/4 of an inch tall. For our other side, it's about the same thing, 3 inches by 1 3/4 inches. Then for the height, it is a little bit different. Now this is about just a 1/2 inch. The wand does kind of skew up a little bit.
Doesn't quite want to lay flat, although it is a little bendy. So it's just made out of plastic. It's not anything super rigid so it will lay flat most likely if you give a little encouragement. That wand again, measures about 6 inches long. Our bumper is about 1 1/4 inch long or tall by about 1 3/4 inches wide and about 5/8 inch thick. The distance between the mounting holes is about 1 inch, which matches up with the short side of our brackets.They're about 1 inch between those mounting holes center to center. Then going the other direction it's about 2 3/16 inches. So just under 2 1/4 inches between those mounting holes going a long way. This is backed by a lifetime warranty from JR Products and that's pretty much going to do it for our look at the Hook and Keeper for enclosed trailers. Again, if you want to find any of those other parts that I mentioned, you can always look around here at eachother.com to find any options to fit your needs. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (46 Customer Reviews)
Hook and keeper door holder securely holds your RV or trailer door open. Constructed of durable plastic and measures 6" long. Includes mounting screws and rubber bumper.
Works as expected, good easy to install
Once again, all the products I ordered are absolutely fantastic. Everything fit, everything was in great condition and it all got to me in several days with free shipping!! That's why I use etrailer, I get what I need, it's always better than what the factory uses and lasts longer than original equipment. Once again, thank you guys. Will be ordering again soon, new different items.
I used this as a replacement for my broken keeper. It fit perfectly, and again, etrailer delivery was super fast. Thank you etrailer!
As advertised; however, check measurements and specifics to make sure it fits existing holes.
I bought this for my older TC and once I received it, I realized that it doesn't line up w/ my existing, broken, door clasp. I don't want to drill new holes.
Product was fine, but there were no instructions on any. Product was pretty self explanatory, but a install diagram with the parts would be good.
Looks fabulous. Works fabulously. Easy to install. Quick delivery. etrailer is great!
Old door check ( hook and keeper ) broke during windy day. Happy you had a new one and sent it right away. Thanks.
Parts worked great. Good to get copies of original parts for replacements. Fit just right.
Easy replacement. Works just fine.
Works fine at holding the door open!
Good replacement, works just fine.
Easy to install and does what it is designed to do.
I used it to hold up the door to the gen-set works great
Still holding up well after 1 yr.
Although I have not installed it yet, it looks like a perfect fit.
good products and fast service
Very fast divert, I still have to install the heater but I look forward to it.
Works as designed
Installed easy
Just what I ordered and quick delivery
As always they have what I need
Fast shipping, quality product, perfect fit.
Exellent service.
exactly what I needed and delivered qui ckly
All was well!
Do you have a question about this Trailer Door Holder?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.