bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve - Manual
  4. 3 Inch Valve Body
  5. Straight Valve
  6. Stationary Valve
Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter

Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter

Our Price: $222.53
RV Waste Valves
Shipping Weight: 4 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Replace the standard waste valve on your RV's black-water tank with this electric one so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and 2 switch plates included. Great Prices for the best rv waste valves from Valterra. Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter part number E1003VP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (94)
  • Q & A (0)
  • Photos

Valterra RV Waste Valves

  • Single Waste Valve - Manual
  • 3 Inch Valve Body
  • Straight Valve
  • Valterra
  • Stationary Valve

Replace the standard waste valve on your RV's black-water tank with this electric one so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and 2 switch plates included.


Features:

  • Electric waste valve replaces or upgrades the waste valve on your RV's black-water tank
  • Easy operation with the flip of a switch
    • Valve opens to allow flow from your black-water tank
  • Light comes on when valve is open
  • Tool-free manual override
    • Remove pin, turn handle, and pull handle to open valve
  • High-torque, water-resistant electric motor
  • Built-in 5-amp breaker provides circuit protection
    • Resets with a push of a button - no fuses to replace
  • Wiring harness, black and gray switch plates, seals, hardware, and installation instructions included
    • Switch plate installs in RV's control compartment
    • ABS solvent bond (A05-0303) sold separately for installation of valve
  • Compatible with 12V systems


Specs:

  • Passage diameter: 3"
  • Valve length:
    • Open: 15-1/4"
    • Closed: 11-1/2"
  • Wiring length: 7'
    • Valve harness: 4'
    • Switch harness: 3'
  • Power draw: 2.5 amps
  • Open cycle time: 1.3 seconds
  • Close cycle time: 1.3 seconds
  • Open/close force: 65 lbs
  • Operating temperature range: 35 F - 120 F
  • 3-Year warranty


Valterra electric valve pieces

The switch plate, wiring, seals, and hardware needed to install this electric waste valve on your RV's black water tank are included. The switch plate installs in the RV's control panel. The waste valve secures to existing pipes using ABS solvent cement (A05-0303 - sold separately). A booklet with step-by-step instructions and a template for drilling are also included.


Valterra electric valve gray water switch

You can also adapt the valve to work with your gray-water tank. A gray switch plate is included for that purpose. For this installation, you will need to use adapters (sold separately) to convert the valve opening from 3" to 1-1/2" in diameter.


Valterra electric valve manual use

If you're dry camping or in the case of a power failure, the manual override is easy to use. Simply remove the pin from the valve's lift arm and turn the handle 90 degrees clockwise. Then pull the handle to open the valve.




E1003VP Valterra Easy Valve Electric Sewer Valve System for Motorhome - 3" Diameter

Item # E1003VP




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter - E1003VP

Average Customer Rating:  4.7 out of 5 stars   (94 Customer Reviews)

Replace the standard waste valve on your RV's black-water tank with this electric one so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and 2 switch plates included.

by:

Installation was easy…. Getting to them was the hard part.
Taking down the underbelly was less than fun. Cutting holes in it was even a worse idea.
But, installation went well. Great product, super fast open and close, easy to wire and made my own console for the switches which wasn’t hard either.

Had to put them in different directions due to the main sewer drain being in the way but the auto gate valves do not care which way they go, they work fine either way. Just hope they last as I really don’t like working on my back….



by:

Except for having to make some minor modifications to my flanges (they were bowed out between the bolt holes) so the actuators were clearing the flange, the install was easy. The flange issue is not the valve manufacturers fault, just how the flange was made. My old valves were cable style and cheap and these will be a great upgrade on Leaky crappy valves. I was tired of getting the sewer surprise every time I dumped. etrailer delivered on time and at a good value.



by:

Nice valve for remote operation . The wiring is 4 ft from switch to motor/valve, and 3 ft of wire for power. I replaced power wire with a 10 ft piece which was only $9 bucks. Take pic of switch wiring cause you need to remove wires from switch to pass wires through any holes you drill in floor and cabinets, etc . Watch out for water , electric wires when drilling holes. Hole needs to be at least 1/2”for wire ends to pass through. If wood is thick I would do 5/8” hole . Pass big wire ends through first and smaller next. Or cut wire ends off and recrimip new ends after running wires.



by:

Every things was in the package , arrive at the time its was schedule .
The installation went very good and easy , to dot it your self if you are manuel its will work find.
I change a existing cable valve with this electric waste valve , the only bad situation was to work under the RV .
The valve work great .



by:

The customer loves it. He said it's a lot easier to control all the dumps in one spot.



by:

This is such a great product,I don't know why it is not an option more often on a rv.I installed the control switch inside my rv near a window that looks out on the sewer connection.I have the clear 3" elbows on both hose ends of my sewer hose,and can observe from inside, the operation of emptying my black tank.Being able to do so during rainy or cold weather is such a great luxury.I have had this in operation for about a year now and it has performed flawlessly.I chose this brand over others due to the ability to manually operate valve in event of a power loss.Installation was very simple and instructions were very detailed.Will never have a rv without one now.

Robert B.

4/9/2020

Still working flawlessly.Been recommending this item to all who inquire about it on my rv.



by:

So far a very good valve. I just removed the old cable valve and this slipped right into it's place.
There was one little surprise, the instructions did not indicate which 12v wire was positive. There is a black and white wire. I assumed black was positive, it's not. So of course the valve opened when I connected the wires.

Dennis T.

6/29/2022

After a year of usage the valve is working very well. I really like being able to flip the switch to drain the tank.



by:

I bought this item hoping it would fix the issues I had with the factory installed cable, NOPE. This part is no better than the cable system. The clip that hold the valve handle to the electric motor doesn’t clip on correctly, I even tried making it work with zip ties, it worked for maybe two weeks, now I just crawl under the RV and operate it manually. Don’t waste your money.

Etrailer Expert

Jenny N.

4/26/2022

You mentioned that the clip is not holding to the valve handle correctly. I wanted to see if you could send a picture?

Ryan

4/26/2022

Hi thanks for reaching out, unfortunately the valve is in a very hard spot to get a decent photo. I am out of town the rest of the week, I could try to take a photo this weekend if needed.

Etrailer Expert

Jenny N.

4/26/2022

I reached out to the manufacturer who advised that often the handle is not in the correct position and if it is not it will cause problems wit the use of the valve.



by:

After one year these valves have been flawless. I added one for black and one for grey tank on our Montana 5th wheel. So much better than the stiff cable valves it had from the factory that never completly closed.



by:

I would recommend this product to anyone who has long remote pull drains.
It made both the black and gray water work without a hitch. Just smooth full open to full closed. Well worth the money. Install them myself with the help of my son. They bolted right up no problem.

Mjh

3/7/2021

Still working great. Should of made this change long ago.



by:

Was originally thold the items would not ship until the week of the 10th, almost a full week after my order was placed. When I called about the order was told it was out of stock. But their website said instock. I recieved the order this afternoon on the 10th. I have been overall very happy with Etrialer and will continue to order from them. As far as the valve, install is tomorrow



by:

I am more than satisfied with this product. We purchased a brand New Renegade Vienna MH, on a Mercedes Chassis. It is a very nice Motor Home, but the very tight spaces underneath the rear caused the (cable pull) Valves very hard to pull and would not close all the way. To our disappointment the manufacturer could not make them work to my satisfaction. A independent repair facility near us suggested the Valterra Electric valves. The manual valves that were on the MH already were Valterra, so the switch was extremely easy. BEST DECISION I've made in years. I 100% suggest this product



by:

Instalation of the valve was easy on my 1999 Alpen lite St. Andrews. Removeable of the underbelly is simple Alpen lite provides two panels to be removed for easy access to manuel valves. The electrical assembly was straight forward having to add 10 inches of wire to reach my battery compartment. For us folks who are replacing our manual valves with electric it would be nice to have a water proof gang box to fit switch assembly. There are no gang boxes available that fit the switch panel without extensive modification to the gang box. Completed installation in 5 hours. The second valve will take about 2. lol Thanks etrailer for great parts at a great price.



by:

Nice valve, well built. Everything needed for the install is included. Valve opens and closes quickly. This valve replaced a leaking cable valve that was in a tight position requiring an excessive angle on the cable. Problem solved with this electric valve. I installed a 5" access port in the belly pan in case of failure. Will allow me to empty my tank without having to drop the belly pan.

My only complaint is that the switch plate will not fit a single or double gang electrical box. Had to make my own since there was no room to mount the switch plate on my panel.



by:

Replaced black valve that had a kinked cable. A great product. Is working well. Installation was difficult in my case due to the original installation. I used two 3" rubber sleeves (Fernco) to join drain line that had to be parted in two places to free up space for the valve. Feel most owners would not have go to these lengths. Electrics were easy. Still glad I did this addition to my RV.



by:

it is so nice to not have to go outside in the winter months and have to crawl under my toy hauler to empty my blackwater tank. Got an electrician who installed the switch right in the bathroom for easy access. No problems at all! Now to get one for each tank for individual control!



by:

I bought these and installed them On my mother's RV she's 93 years young and summers in northern New Mexico these EZ valves has made her life so much easier wish I would have done it earlier



by:

Great product has been maintenance and trouble free. Easy to install good instructions and so much better to operate if you have the old type pull cable you know what I mean. I'm going to order 2 more one for the two gray tanks and will make a video of those install . I highly recomend this product . And sorry I didn't do pictures are video.



by:

Can't say enough about these valves. The were fantastically! I'd easily give 5 stars but the one small complaint I have it that I had to cut a clearance bump/blister into my RV corregated basement floor because I couldn't get them in a position where something didn't stick out. That was more an installation issue. Now that they're in we love em!



by:

Just installed, Easy, No Issues
Pro
- quality appears to be good, works fine, would purchase again
Con - Circuit breaker little cheap looking, wire harness too short, needed to
extend for my installation
Would like to see in a 1 1/2" direct replacement for gray water tank.



by:

I bought 3 of these valves and installed them to replace my cable actuated valves. They were delivered in a timely manner and very well packaged. The time to install these was much faster than expected. They came with everything needed. Crystal was very helpful in the buying process. I will definitely buy from etrailer again.



by:

After a year of use the valves work just like new.
Installation was simple and there is enough wire
to put the switches wherever you want.
The switches could be marked a little clearer
for open or closed even though there is a led light.



by:

Shipped on-time as told through the confirmation email.
Arrived perfect and intact-undamaged. All Parts were included. I had it installed with-in One hour of it arriving. Tested for leaks, none and were good to go!
So excited about having a remote switch to cycle our black tank now. I know it might now seem like a big deal, but it is when you live full-time in an RV.
I have ordered from etrailer before and knew they were my go to source for Parts Online. Always great service people to talk to on the phone. Great Job Guys and Gals!



by:

Great customer service from etrailer.com. Super fast shipping. Item looks to be easy to install, I have not installed it yet. Looks to be good quality and should last many years of service.



by:

Absolutely love this electric valve. I easily installed it and it beats a long cable actuated push-pull hands down.


25
93
Show More Reviews

See what our Experts say about this Valterra RV Waste Valves

  • Troubleshooting Cable Waste Valves Not Functioning In Sub-Zero Temperatures
    I'm sorry to hear about the issues you are having in the cold weather. I reached out to my contact at Valterra and they said that cold shouldn't be an issue with operation unless there is moisture in the cables or if the cables have kinks or coils. The orientation of horizontal versus vertical should not be a factor. If it were me, I'd start with trying to lubricate the cable system using penetrating oil like and working it as far into the cables as you can by working them open and...
    view full answer...
  • Is Switch of Valterra EZ Valve Electric Waste Valve # E1003VP Weatherproof
    The switches of the Valterra EZ Valve Electric Waste Valve # E1003VP that you referenced are considered weather proof but I would still recommend you install them away from direct rain and weather. You'll have to use your best judgment but under a ledge or in a recessed area that won't get direct rain is the best option for long time reliability.
    view full answer...
  • Why It's Easier to Replace Valterra Waste Valves on RV with Valterra Valves
    I'd go the easier route and use the Valterra kit part # E1003VP for the 3 inch kit since it will make the install much easier. Plastic welding in new fittings can be frustrating so I'd go the easier route!
    view full answer...
  • Is There an Extension Harness for Valterra EZ Valve Electric Waste Valve
    You could probably extend the wires individually of the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank # E1003VP but we don't an extension harness made specifically for this.
    view full answer...
  • Waste Valves to Replace Those With Rods That Are Falling Off
    If your waste valve handles and rods are falling off you are going to need to replace your waste valves. I have added a link to our entire selection of waste valves so you can find the exact replacement you need, based on the connection you need. I also recommend considering an electric valve such as the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter # E1003VP to mitigate this type of issue. I have added a link to a video review of this valve for you to...
    view full answer...
  • Do Waste Valve Rubber Seals Need Lubricant?
    The Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter # E1003VP does not require any lubricating of the rubber seals. I do know that some people choose to add silicone plumbers grease to the seals because they believe it helps the seals to last longer, but it is not required and also is not included in the kit.
    view full answer...
  • Valterra EZ Valve Electric Waste Valve Installation
    Yes you are correct Valterra EZ Valve Electric Waste Valve for RV Black Water Tank part # E1003VP does come with everything you will need. The confusion came from the spigot or hub ends and which one they needed for their application in that question. With a valve that is currently in good shape you will retain your current spigot or hub setup and this valve will simply bolt in between replacing your current valve. This is a great solution because it won't require you to cut and repair...
    view full answer...
    Image 1 for
  • Manual Override on Valterra EZ Valve Electric Waste Valve
    I reached out to the manufacturer about this question and they replied, when the EZ Electric Valve is activated, it is fully open or fully closed. There is no way to throttle the flow. However, this unit, the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank Item # E1003VP, does have a manual override in case you need to have this unit be partially opened or closed, it can be done. To activate manual override, there is a pin that is able to be pulled out, then rotate the...
    view full answer...
  • EZ Valve Electric Waste Valve Installation Positioning and Function
    The Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter # E1003VP will have no problem with function anywhere between vertical and horizontal. You will only be restricted by the valve mounting flanges on your current system, but you have the option of replacing those to meet your needs. I've attached a video of this system to assist.
    view full answer...
  • Are Other Parts Needed When Installing
    You'll also want some ABS solvent like part # A05-0303 to seal the Valterra EZ valve # E1003VP to to your RV. That's all you'd really need. We promise to have the lowest advertised price if that counts as a special!
    view full answer...
  • Will Valterra EZ Valve Electric Waste Valve Survive Cold Winter
    Yes, the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank # E1003VP can absolutely survive the cold winter and still work great. The motor on the unit is water resistant and the valve will seal off and maintain its integrity with the proper cement, the Valterra ABS Solvent Cement # A05-0303. I have added a link below to a video review for you to check out as well of the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank # E1003VP.
    view full answer...
  • RV Automatic Black Water Release Valve
    We do not offer a lock made specifically for use on an RV waste valve and we are not aware of any item intended for this specific purpose. The nearest thing we do offer is the Valterra EZ Valve Electric Waste Valve # E1003VP which operates your dump valve via 12V power. This is not a lock and the valve can still be manually opened but its primary purpose is to allow remote operation of the dump valve.
    view full answer...
  • Can the Valterra EZ Valve Electric Waste Valve # E1003VP be Installed Right Behind the Waste Cap
    You definitely can use the Valterra EZ Valve Electric Waste Valve # E1003VP just before the cap to your black water tank to avoid any unpleasant presents when you take the cap off. To install it you will just need to cut the pipe and then glue the appropriate pieces together with Valterra ABS Solvent Cement # A05-0303. A great option to accomplish this is to use the Valterra RV Sewer Slip Hub with Flange # T1005 that has a 3" diameter. Just keep in mind that when the valve is open it...
    view full answer...
  • How To Secure An Electric Waste Valve for RV Black Water Tanks
    Yes, you are correct in that the piping that runs both into and out of the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank part # E1003VP will be sufficient for mounting and securing the water valve. You will not need to mount any additional brackets to secure the valve. The waste gate has a wiring harness totaling 7' in length. For a proper installation, I recommend using the Valterra ABS Solvent Cement part # A05-0303. I have also attached a review video of this waste...
    view full answer...
  • How to Choose the Correct Valterra EZ Valve Electric Waste Valve for RV Black Water Tank
    The difference between a hub connection and a spigot connection is that the hub is the female end and has a lip on the inside that stops the spigot (or male) end where it needs to be. I have attached some pictures to assist. With this knowledge it is just a matter of taking your valve off and choosing the correct replacement: 3" Hub to 3" Hub - # E40B-8 3" Hub to 3" Spigot - # E40-8 3" Spigot to 3" Spigot - # E40A-8 I would avoid going with the option that only has the 3" Diameter #...
    view full answer...
    Image 1 for Image 2 for
  • Can a Second Switch be Wired in and Used with Valterra EZ Valve Electric Waste Valve # E1003VP
    Valterra EZ Valve Electric Waste Valve # E1003VP is operated with a switch and the valve would either open or close accordingly. If you are talking about just installing a second switch then it is possible though the switch is not available separately. You might be able to wire in two electric valves but both would either open or close together. But the switches may not be rated for the load of 2 electric valves. This one is fused at 5 amps so you would likely need a separate switch for...
    view full answer...
  • Replacement Waste Valves for a 2014 Heartland Elkridge
    Yes, we have both economy and premium replacement valves for your 2014 Heartland Elkridge. However, in order to recommend options for you I would need to know what type of valves you have as well as their size. The most common is 3" for black water tanks and 1-1/2" for grey water tanks. In most cases there will be a wye in which the black and grey water outlet is combined but they can also be separate so I will need to know which you have. If you just need a replacement economy valve body...
    view full answer...
  • 1-1/2 inch Valterra Bladex Waste Valve Recommendation for 1-1/2 inch Gray Water Tank Valve
    Since you have a 1-1/2 inch gray water tank valve what you'd want is the part # T1001VP for that size. We don't have an electric version of this though.
    view full answer...
  • Switching From Manual To Powered Mode On The Valterra EZ Valve Electric Waste Valve
    The manual handle on your Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter # E1003VP needs to be connected to the black powered arm behind it that goes in and out to open the gate. In the photos you don't have the handle in the black powered arm so it will not pick the handle up to open the gate when you press the open button. I've attached a video where you can see the EZ valve in action.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Can a Valterra Electric Waste Valve Replace a LaSalle Bristol Valve
    I spoke with my contact at Valterra, who confirmed that the Valterra valve should replace a standard LaSalle Bristol unit. You can simply slide out the LaSalle Bristol valve, slide in the Valterra unit, and bolt it back in place. The Valterra EZ Valve # E1003VP has the motor mounted directly onto the valve, so as long as you have the space for this, there should be no issue using it with the LaSalle Bristol valves. The ABS solvent bond for installation, # A05-0303, is sold separately.
    view full answer...
  • Does Valterra 3 inch Waste Valve Fit 3 inch Bristol Hub
    The Valterra EZ Valve Electric Waste Valve System # E1003VP that you referenced is designed to fit standard RV waste setups that use 3 inch pipes like what a 3 inch Bristol hub is so yes, it would work.
    view full answer...
  • Length of Harness on Valterra EZ Valve Electric Waste Valve
    The length of the wire harness on the valve of the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank # E1003VP is 1 foot.
    view full answer...
  • Does Valterra EZ Valve Electric Waste Valve # E1003VP Install by Just Replacing Old Valve
    You'd want to remove your old valve and use ABS solvent bond like part # A05-0303 to install the part # E1003VP but it basically just installs in place of the old one.
    view full answer...

Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B
Employee Mary K
Updated by:
Mary K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924