Camco RV Wastewater Tank Replacement Valve

See what our Experts say about this Camco RV Waste Valves

• Replacement Valve for Black Water Tank on Forest River Travel Trailer
  We do have a large selection of replacement valves available for RV black water tanks, which I have linked for you to check out. I recommend taking a look at the Camco RV Wastewater Tank Replacement Valve # CAM39513. This valve is designed to be a universal fit and should perfectly replace your bad unit. To be sure this will work, you can also take a quick measurement of your existing tank valve. The hole/passage on this replacement valve is 3 inches in diameter. If this matches what...
  view full answer...
• Will Camco RV Wastewater Tank Replacement Valve # CAM39513 Fit a 1984 Komfort 5th Wheel Trailer
  The Camco RV Wastewater Tank Replacement Valve # CAM39513 does not have a specific fit list of models it is compatible with so you have to go by the measurements. The hole or passage is 3 inches in diameter. If that is the same diameter of the existing tank valve then this replacement should work out well.
  view full answer...
• Compatibility of Camco RV Waste Valve With Valterra RV Hubs
  Yes, the Camco RV Wastewater Tank Replacement Valve # CAM39513 will have the same bolt pattern as the Valterra RV Sewer Slip Hub # T1005 that you are connecting to. I would still recommend using a Valterra Bladex Waste Valve # T1003VP as it does not have the channels on the side and will sit flush with the mounting hubs. I don't like the grooves as they are a place that can hold water and dirt. This could lead to unwanted damage from freezing or corrosion.
  view full answer...
• Will the Camco RV Wastewater Tank Replacement Valve # CAM39513 Fit a 1983 Fleetwood Jamboree
  The part # CAM39513 is going to fit your 1983 Fleetwood Jamboree as long as the diameter pipe on your RV is 3 inch. Most are so it should fit, but you still will want to measure first.
  view full answer...
• Are Replacement Cables And Handles Available For A Cable-Actuated RV Waste Valve
  Depending on the brand of the gate valve you will either be able to replace just the cable and handle or will have to replace the entire valve/cable/handle. LaSalle Bristol builds the cables into the housing for the valve, making them essentially trash if the cable ever becomes detached. Valterra uses a nut to hold the cable to valve, allowing for replacements to be swapped in. If you have a Valterra branded valve then you can use the following cables: 72" # TC72PB 96" # TC96PB 120" #...
  view full answer...
• What Is Causing My RV Tank Valve To Leak?
  Usually what causes an RV tank valve to leak is something getting caught in the disc/valve causing water to seep through. I recommend attempting to flush your tanks out and seeing if that clears whatever may be causing the leak. If that does not solve the issue, then I recommend replacing the valve with a replacement like the Camco RV Wastewater Tank Replacement Valve # CAM39513. If you let me know what kind of valve you have right now, and are wanting a replacement, then I'd be more...
  view full answer...
• Will Camco Waste Water Repair Kit Work with Other Brands of Valves
  It is very likely that another brand replacement valve such as # CAM39513 will work with what you already have on the trailer. it is pretty much a standard size. If your existing set up has a 3 inch diameter opening then the Camco one will work.
  view full answer...
• Is Camco Waste Valve Handle Threaded?
  Yes, the Camco RV Wastewater Tank Replacement Valve # CAM39513 is threaded. Another option is the Valterra Bladex Waste Valve # T1003VP, which like the Camco is a manual single waste valve with a 3" diameter.
  view full answer...
• Is Camco RV Wastewater Tank Replacement Valve a Universal Fit
  Yes, the Camco wastewater tank replacement valve # CAM39513 will fit in place of your broken one. These valves must all be a standard size because I haven't seen one yet that was different! If your line is 3 inches then this will work for you. I recently learned that grey water pipes can be 2 inch or 1-1/2 inch in diameter. But a black water line and main sewer outlet, like what you are looking for, are usually 3 inches.
  view full answer...
• Should Sewer Gaskets Be Placed Inside Pipes or Camco Wastewater Replacement Valve for Installation
  It's going to be easier to place the gaskets on the pipe and slide the Camco RV Wastewater Tank Replacement Valve # CAM39513 in between. If you can't get the gaskets to stay in place the what I recommend doing is taking a small piece of tape to keep them in place until you can get the Camco valve started. Once the valve is started you should be able to remove your tape and slide the valve the rest of the way before installing the bolts and nuts.
  view full answer...
• Black Tank Blade Valve Not Working
  I can't be sure how the end of the rod at the blade of the valve is attached. If the handle and rod we can see turn freely, then I would turn the rod clockwise to see if you can get it to thread into something. I am going to guess that yanking on that T-handle for the past few years has broke that end off. The real issue here is the fact that the blank tank is full. You are going to be replacing this valve so there is no loss for cracking it open. I would put your sewer hose on and have...
  view full answer...
• Does Camco RV Wastewater Tank Replacement Valve Part # CAM39513 Include Hardware
  Yes, the Camco RV Wastewater Tank Replacement Valve Part # CAM39513 does include mounting bolts and nuts. This item replaces the valve on your RV's black-water tank.
  view full answer...
• How Many Seals are Included with the Camco RV Wastewater Tank Replacement Valve # CAM39513
  Two seals are included so that when you install the Camco RV Wastewater Tank Replacement Valve # CAM39513 it would be totally sealed and not leak.
  view full answer...
• Red and Amber Trailer Clearance Light Recommendation with 3-3/8 inches Between Mounting Holes
  The Optronics clearance light part # MC48AB has a distance of 3-3/8 inches between the mounting holes. The red version is part # MC48RB. I am thinking you are looking for a sewer valve like the part # CAM39513. This has a 3 inch diameter and an easy way to open and close with the handle on top.
  view full answer...
• Are There Installation Differences Between LaSalle Bristol, Valterra, And Camco Wastewater Valves
  No they will all mount differently. For example, LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable, part # 34466N4BB96GM, needs ABS solvent cement, part # 3447530889, to secure the valve to your sewer pipe. Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug, part # T50, also uses ABS solvent cement, part # A05-0303, but Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug, part # T58, is...
  view full answer...
• Replacement Sewer Valve for Trailers and RVs with Valtera Valves
  I took a look at the Valtera line of products and the 3 inch replacement valve we carry # CAM39513 can be used as a replacement. If you want to replace the whole assembly and have an input for a regular garden hose for rinsing you can use # CAM39062.
  view full answer...
• Replacement Black Water/3" Waste Valve for 2014 Coachmen Freelander Motorhome
  In order to recommend best options for you I would need to know what type of valve you have as well as the size. The most common is 3" for black water tanks and 1-1/2" for grey water tanks. If you just need a replacement economy valve body then the Valterra Bladex Waste Valve Body, # T1003VP is a great option. The valve body, seals, nuts, and bolts are all included. This fits Fits Bladex, Valterra, Bristol, and Anonda valves, please verify the currently installed valve brand against this.
  view full answer...

Do you have a question about this RV Waste Valve?