Double RV Waste Valves - Elbow - Rotating - 1-1/2", 2", and 3" Hubs to 3" Spigot

Video Transcript for Valterra RV Sewer - Waste Valves - T83 Review

Speaker 1: Today, we can take a look at the Valterra Rotating Double RV Waste Valve Elbow. Now, this RV sewer elbow will combine a 1-1/2" waste valve and 3" waste valve, and this can be used as a replacement part or upgrade your existing set-up. The elbow will help merge the flow of your waste from your black water tank and your gray water tank. These are rotating valves. They offer easy access at your mounting location. Basically, you can just move the valve and position it at your desired angle during installation.

You can see you just pull up on it to open the valve; same way on this gray water. Again, to rotate it, you would just loosen those screws there, move it to whatever position you need, and tighten it back up.Now, the 3" inch hub right here will slide over your RV's black water line. The 1-1/2" hub over here will slide over here will slide over your gray water line. The 2" hub slides over a sewer pipe, and the 3" spigot right here will slide into a separate sewer line. This part is a durable, black ABS plastic construction.

Now, it does require ABS solvents in that when you install this. We do sell that separately on our website.If you notice . one last note on it. If you look at the handles on the valves, this one's black, so that signifies that this is for your black water tank. This one's gray, which will tell you that that's for the gray water tank.That should do it for the review on the Valterra Rotating Double RV Waste Valve Elbow..