bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve - Manual
  4. 1-1/2 Inch Valve Body
  5. Straight Valve
  6. Stationary Valve
Valterra Waste Valve for RV Gray Water Tank w/ Cap - 1-1/2" Diameter - Spigot to Male Thread

Valterra Waste Valve for RV Gray Water Tank w/ Cap - 1-1/2" Diameter - Spigot to Male Thread

Item # T1001D
Retail:$37.43
Our Price: $33.11
You Save: 12%
RV Waste Valves
Shipping Weight: 0.62 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Spigot slides into sewer pipe. 1-1/2" Male NPT end threads onto sewer system pipe. Great Prices for the best rv waste valves from Valterra. Valterra Waste Valve for RV Gray Water Tank w/ Cap - 1-1/2" Diameter - Spigot to Male Thread part number T1001D can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Waste Valves - T1001D

  • Single Waste Valve - Manual
  • 1-1/2 Inch Valve Body
  • Straight Valve
  • Valterra
  • Stationary Valve

Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Spigot slides into sewer pipe. 1-1/2" Male NPT end threads onto sewer system pipe.


Features:

  • Replacement valve for your RV's gray-water tank
  • 1-1/2" Diameter passage allows wastewater to travel freely when valve is open
  • 1-1/2" Spigot slides into sewer pipe
    • ABS solvent cement (sold separately) required for installation
  • 1-1/2" MPT end threads onto sewer system pipe


Specs:

  • Length with valve open: 8-3/4"
  • Length with valve closed: 6-3/4"
  • 1-Year warranty


T1001D Valterra Motorhome Grey Water Holding Tank Waste Valve w/ Cap and Strap - 1-1/2" - Spigot x Male Thread





Video of Valterra Waste Valve for RV Gray Water Tank w/ Cap - 1-1/2" Diameter - Spigot to Male Thread

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Valterra RV Sewer - Waste Valves - T1001D Review

Today we're going to be taking a look at the Valterra RV Waste Valve with the included cap and tether. The unit simply adds, or replaces a waste valve in your RV's waste system. It's made from a strong, and durable black plastic construction. Here on this end we're going to have the cap and tether. The tether design is nice, because it keeps the cap from being misplaced or lost. Always keeps it connected.

Now you'll notice on this side that it's going to have the male threaded pipe. This is going to give us an outer diameter measuring outer thread to outer thread pretty close to one and seven eighths of an inch. Internal, which is inside edge to inside edge that going to give us a diameter of about one and seven sixteenths of an inch. One the other end this is going to give us an diameter measurement of about one and seven eighths of an inch, inner diameter is going to measure about one and nine sixteenths of an inch. It's designed for an inch and half pipe. On top we're going to have the easily accessible T-handle.

It makes opening, and closing the gate quick and easy. It's going to be gray in color. The unit is already assembled. It has the appropriate seals internally that's installed for leak-proof performance. Let me put the cap back on, and then we can go over a few more measurements.

I'm going to give you a length measurement with the handle in the closed position. That's going to give us a measurement of about six and three quarters of an inch. Then if we extend that out, and do that same measurement we're lookin' at about eight and three quarters of an inch. That's going to do it for today's look at the Valterra RV Waste Valve with the cap and tether.

Customer Satisfaction Score:


Customer Reviews

Valterra Waste Valve for RV Gray Water Tank w/ Cap - 1-1/2" Diameter - Spigot to Male Thread - T1001D

Average Customer Rating:  4.9 out of 5 stars   (11 Customer Reviews)

Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Spigot slides into sewer pipe. 1-1/2" Male NPT end threads onto sewer system pipe.

by:

GREAT DRAIN VALVE, MIGHT HAVE TO LUBE WITH SILICONE ONCE A YEAR DEPENDING HOW MUCH USE.



by:

It has done its job so far, no leaks so far after a year.



by:

Appears well made and outside diameter of slip fitting fits nicely. Cap tether pivots as not to break from repeated use, although recommend taking the time to support the tether when unscrewing the cap.

Had difficulty locating a 1-1/2” waste slide gate valve with a threaded end and slip fitting on the internet. I custom made living quarters in the front section of my GN horse trailer. The park where I take horses camping frowns deeply on discharging grey water from my showe and sink on the ground (although it is ok to wash horses..go figure) so had to plumb in a drain system. This valve will allow me to make a connection to a portable grey wastewater tank.

I’d share pictures but haven’t installed the drain system, just received all the fittings to do so.



by:

Excellent quality, packaged very well. Arrived sooner than expected! Great online service for parts. Parts will be used to separate black water from grey water, black water to septic, grey water to tank for other uses. Thanks again,



by:

I buy a lot of these and they work great, after a year i usually put a little lube on the gate valve. The only time they go bad is when they get hit.



by:

I am using the for a flush drain for my tuna bleed barrel. And fast delivery. Mark



by:



by:

excellent quality and very fast delivery nice!!!!!



by:



by:



by:


11
11

See what our Experts say about this Valterra RV Waste Valves

  • Drain Hose for 1-1/2" Diameter Valterra Waste Valve
    To connect a standard garden hose part # W01-4180 (15') or # W01-4300 (25') to your Valterra Waste Valve # T1001D you will need an adapter like part # T01-0094VP or part # T01-0091VP which has a 90 degree elbow on it. Simply remove the cap off of the waste valve then add either of the adapters with a typical garden hose and you are good to start draining!
    view full answer...
  • 1-1/2 inch NPT Dump Valve for RV
    For the 1-1/2 inch MPT sewer hose size we have the valve kit part # T1001D which it sounds like you are in need of. At this time we don't have any extension hoses in this size.
    view full answer...
  • Replacement Cap for Valterra RV Gray Water Outlet
    For a 1-1/2 diameter pipe, you'd need the # TSV6, or for a 3 inch diameter pipe, use # T1020. Both replacement caps are black in color. If you prefer a clear cover, a 3 inch diameter cap is available as part # T1020CLRVP.
    view full answer...
  • Grey Water Drain Spout Needed for a 1984 Fleetwood Pace Arrow Motorhome
    We do have some waste valves for grey water tanks like the Valterra part # T1001D which has spigot to male thread connectors or the Valterra part # T1001C which has hub to male thread connectors. Unfortunately manufacturers don't keep record of the smaller details like part numbers for drain spouts so I don't know what exactly you have on your 1984 Fleetwood Pace Arrow Motorhome but if you send me some pictures I can help you figure out the exact parts that you need.
    view full answer...
  • Recommended Waste Valve And Drain Hose Attachments For A Grey Water Tank
    For draining your grey tank I recommend using the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001D with some Valterra ABS Solvent Cement # A05-0303 to secure it to the pipe. Then you can screw on the Valterra Gray Water Drain Connector # T01-0094VP and screw on a hose like the Valterra Flushing Hose for RV Sewer System # W01-4300.
    view full answer...
  • Drain Hose to Use With the Valterra 1-1/2" Waste Valve for RV Gray Water Tank With Cap
    We do have an option for a drain hose to be used with the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001D. When installing the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001D, you will want to use some Valterra ABS Solvent Cement # A05-0303 to secure it to the pipe. You can then attach the Valterra Gray Water Drain Connector # T01-0094VP which will allow you to use the Valterra Flushing Hose for RV Sewer System # W01-4300.
    view full answer...
  • Dimensions of EZ Coupler RV Waste Valve Cap F02-3106BK for Black Water Valve
    The EZ Coupler RV Waste Valve Cap # F02-3106BK fits all standard 3-inch bayonet RV black water waste valves such as part # T58. Gray Water valves like # T1001D are 1-1/2-inches in diameter. Cap # F02-3106BK also has a 3/4-inch connector and cap. Please see the linked video for details on this item. For reference I linked our main page for RV plumbing items including both black and gray water hoses, adapters and fittings.
    view full answer...
  • Determining if Gray Waste Valve for RV is Slip on or Thread In
    You'll have to look at the way the pipe connects to your RV plumbing to determine if the valve slips over the piping or into it or if it screws in. It should be obvious under closer inspection. We have screw in options like the part # T1001D for 1-1/2 inch. Either way though most likely it will be plastic welded so it would need to be cut off since that can't be undone. When you go to replace you'd need the solvent # A05-0303.
    view full answer...
  • Where Does the Replacement Cap with Strap for Valterra Gray Water Waste Valve Install
    The Replacement Cap with Strap for Valterra Gray Water Waste Valve part # TSV6 is simply a cap for a 1-1/2" grey water waste valve like the one you see on the end of the Valterra Waste Valve for RV Gray Water Tank w/ Cap part # T1001D. With that being said I am not exactly sure I know what rubber cap you are referring to. If you could send me a photo I would be glad to see if we have what you need to fix this but otherwise you would need to take your trailer to an RV service center to...
    view full answer...

Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.