Ultra-Fab Rotating, Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2

by: Billy04/25/2024

The wheels are holding up just fine. We have only used our 5th. once since I installed them. The wheels have started to rust some, and the trailer is stored inside an R.V. cover. I have no idea how durable they will be after a few years.1773079

Click to Enlarge

by: Alan03/09/2023

Within 100 miles of driving, one of the two skid wheels started losing its red vinyl coating. On the other hand, it's still serving its purpose.1532995

Click to Enlarge

Katrina B.

3/14/2023

This could be from the wear of the wheel on the road surface, while doing its job. Good news though, this is still covered under warranty! I will send you the warranty information via email.

parts seem okay but packing and shipping was terrible should have been packed much much better1573665

Click to Enlarge

Click to Enlarge

Katrina B.

5/15/2023

Lets get you over to our customer service department to make sure that you arent missing anything.

I've purchased these several times now. They are cheaply made and break every time I go up my driveway. I ended up making my own and mine haven't failed once. I guess if you're not mechanically inclined or don't own a machine shop, you would be out of luck on this purchase. Disappointed in the poor quality.1729501

The Curt receiver hitch is a quality item. The installation took a little longer than expected to remove & re-install the enclosed underbelly on my 5th wheel trailer. The installation of the wheel kit was simple. 144920

Click to Enlarge

Chuck B.

8/7/2015

After a year the wheels are still in perfect shape as keeps the back of my 5th wheel trailer and ladder from dragging

by: Ronald 12/05/2023

Like so many others, I had a problem with occasionally scraping the road when entering or exiting steeply angled entranceways. These rotating skid wheels took care of that problem.1698743

These wheels work great on our 27 foot Class C! The support braces of our trailer hitch would rub at the street when entering or exiting our driveway. We bought the skid wheels hoping they would make the transition easier. They do their job perfectly. I’ve only had them for a couple of months but they seem to hold up nicely. The only gripe I have is I wish the hardware included flat washers for both ends of the mounting bolts to make them a bit more secure. They aren’t loose or anything like that but the mounting holes are a bit large and the holes overlap some of the bolt and nut bearing areas on the mounting plate (see photos). I’m adding washers to my application.1307476

Click to Enlarge

Click to Enlarge

Click to Enlarge

Received the box with the roller wheels in it, but the box was so damaged I did and inventory of the contents and found that on of the mounting plates was missing. I contacted etrailer right away on their customer service line. They apologized for the condition of the shipment and the missing mount plate. They got right on shipping me another mount plate, which delayed the installation of the wheel assemblies onto my Winnebago Aspect 30J motorhome. My suggestion is to pack the vendor box into another container with padding because of the weight of the container, the original vendor box cannot withstand the shipping handling that it goes through. Also as I was reviewing the hardware that was sent, I realized that due to the hole size in the mounting plates and the roller assemblies, that the bolts needed to have thick flat 3/8 inch washers to do a proper installation to prevent the bolts and nuts pulling through the mounting plate hole locations. Once I acquired the proper washers the installation was a simple task to accomplish, which I had completed in approximately 30 minutes. Haven't use the motorhome yet, but had a set of these roller wheels on another motorhome before this unit and they worked great.644723

Click to Enlarge

Click to Enlarge

We've had our Class C for just over 5 months now. In CA we have a lot of steep driveway thresholds due to water runoff and it creates the kind of problem these casters were made to resolve. Standard on most of these RV's are those rudimentary "V" shaped metal skids that make the most god awful screeching sounds when you begin to bottom out your back end. In just 4 months, I managed to grind through one skid completely. And was on our 7th weekend trip. So, I did a search and trailers product came up as one of the highest rated products. I didn't hesitate and they arrived at my door 4 days later. Installation was simple but I would suggest using a deep socket due to the length of bolts and how many turns are required to cinch it up. This weekend was the first test run because I knew two spots where I was guaranteed to bottom out. Only this time no screeching, not grinding sounds. Only silence as the caster wheels did their job. PLEASE NOTE: It is important to use both zinc fittings on each assembly and inject lube on the first initial run. 483565

Click to Enlarge

by: Patrick 06/25/2023

These skids wheels are just what I needed. With our first big toy hauler back in 2015, I had to have similar skid wheels welded on at their base plate. This style is bolt on for easy assembly with the rear frame rail. Needed both sets installed due to the creek crossing (severe incline) on the county road to get to our house here in The Texas Hill Country.1608781

The cheap box and poor packing was torn open and retaped prior to shipping. I recieved one wheel and no mounting plates. I spoke with Joanne at the etrailer customer service dept and she will refund my purchase.1612502

Quick and easy to install. From the box to final installation, less than 20 minutes. Substantial heavy construction. I hate hearing the hitch bar on our coach scrap coming out of our sloped driveway and some gas stations. I believe this is will do the treat.550555

Click to Enlarge

Great product, I originally bought it from my RV it worked so good I bought skid wheels for my boat trailer647392

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Douglas11/07/2023

Just going out of a driveway broke one. It wasn’t but another week before the other one shattered. The dealership that installed them for me found a pair that are solid case hard metal and are still doing service to this day. These appear at 1st to be well made and sturdy but are are far from it, useless.1690610

by: James 03/02/2023

I live on a hill and could not get my 5th wheel camper up our driveway until these wheels were installed on the back bumper of the camper now it goes up the driveway just fine1528374

Excellent product easy installation installed on a 2021 Sunseeker 2350 LE1297603

Click to Enlarge

I installed this item onto the trailer hitch of a 31 ft. class C motor home a few months ago and have driven in and out through many driveways since then with no issues. The other day, after driving out a frequently-traveled driveway, the center of one of the wheels broke; the rim now flops on the axle. Another reviewer had the same issue. A replacement wheel is available here as part # UF48-001011 but before buying one I'm going to research other skid wheel products.545094

Craig

7/23/2019

the inner wheel structure was crushed and failed. The other wheel broke too. A solid wheel would probably be better.

I'm giving a 5 star rating even though one of the products I ordered arrived damaged. Immediately upon receiving the skid wheels, I opened the package and found that one of the zerk grease fittings had snapped off at the base. I took a photo and called etrailer. They asked that I send the photo because it was an unusual situation. They responded immediately by email stating that a new pair of wheels was being sent along with a return label for the damaged set. Excellent service as always!269714

Mike B.

7/9/2017

I have been very happy with the skid wheels. I originally purchased them to help me get my 5th wheel up my very steep driveway. Im sure they would have helped but my driveway is so steep that I didnt try it because I was concerned that it would tork the frame too much. They have helped in several other situations such as entering the drives at some refueling stops. Easy install and good quality.

I'm giving it 4 stars because of this company's very quick service and the price was right. I got my package after only a couple of days so etrailer seems to be a good site for purchasing accessories.... My review on the product will have to wait... I got two Ultra-fab skid wheels rated for up to 26' RVs and they reamed out after only about 10 or 12 uses (my RV is 26')... I am hoping this one with a 30' rating will work and it does look sturdier... Will see...908952

Bud

11/7/2021

Reamed out after ten or 15 uses...

Here are a few photos after installatio n.460439

Click to Enlarge

Click to Enlarge

Click to Enlarge

I have not had the opportunity to test these skid wheels more than once. Therefore, not sure about their durability. I can comment on the installation process however. I took notice that there really should of been 16 washers included that would be used on the bottom bolt head and top nut head. The bolts and nuts “Surface Head” area are not large enough. As you tighten them down onto the wheel plate and support plate the pre drilled hole area are a bit too large, causing the bolt and nut head to try and pull through these holes. They did not actually pull through, but in my opinion, would have compromised the plate structure. So, I added washers thin enough not to interfere with the wheel bearing rotation at the wheel plate surface.

As for the visual strength integrity check of the wheels; I am skeptical about them being strong enough in design. Did take notice that other reviewers are kinda 50/50 on these wheels holding up.
Lastly, the ultimate wheel size should of been 5 inch opposed to 4 inch that I received, when applied to a class C or A Motorhome this would provide the extra 1/2 inch support necessary to give hitch and bumper clearance needed. As is, touch and go On my clearance.

As for ordering and shipping; no issues, product arrived on time and as per ordered.891872

by: John 09/17/2021

Best skid wheel choice. The caster feature is very important. I previously had the fixed wheels and broke one when I had to make a turn into a steep driveway. The back of my motorhome is about 7 feet behind the rear wheels, so the hitch mounted wheels swing through about an 11 foot arc in a 90 degree turn. Rigidly mounted wheels cannot take the side load. Rotating wheels solve this issue .1155443

Good product design, but the final product needs so QA. First off, the supplied bolts are to small for the size holes in the mounting brackets, (see pics). I had to install washers to ensure that the bolt heads were perpendicular to the mounting plates and not being drawn up at an angle that could ultimately result in metal fatigue when stressed under use. Bottom line; bolts need to be larger or the holes in the mounting brackets drilled smaller. Secondly, the grease fitting on one wheel pulled out when the grease gun was removed from the fitting. Insufficient thread length on the grease fitting or cross threaded, not sure which just yet.
Attaboy on the packaging and shipping. Had it not been double boxed there would have been parts missing, as there was already a small hole in the inner box. Received the package sooner than expected.251211

I purchased these because my new 2018 Thor Quantum 26RS is constantly hitting bottom on the rear hitch on streets, my driveway, gas stations, just everywhere. Installation is easy and they seem well made although I've only had them a week or so they seem to do the job. At this point I have to reserve judgement on product longevity. Fender washers are required as the nut heads are small and the plate openings large which is not a good match; 8 washers/wheel are needed for a proper installation. Also, each wheel has 2 zert fittings so a grease gun is needed. Be gentle with the zerts as they snap off easily. Installation is easy; a 9/16's socket wrench along with a 9/16's box/open end wrench does the job! 472156

Put these on the back of my 24' Class C Winnebago to gently lift my rear end while leaving my drive. I needed an extra inch of clearance to keep from dragging and damaging my bumper. These were the perfect solution that and I avoided expensive lift kits and leaf springs. These are great and several people on our Facebook website have since installed this mod. 541008