Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
(546 reviews)
Price: $286.66
In Stock
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Item # K71-707-02
Retail:$320.54
Our Price: $286.66
You Save: $33.88
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (546)
- Q & A (0)
- Videos (3)
- Photos
- Used (2)
Dexter Trailer Leaf Spring Suspension - K71-707-02
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Tandem Axle
- Dexter
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.
Features:
- Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle
- Designed for use on trailers with tandem, #10 Torflex axles with 2,300 to 4,000-lb capacities
- Spacers attach to side-mount brackets on your trailer's frame
- Not compatible with top-mounted torsion axles
- Includes:
- (4) #10 Frame spacers (003-377-02)
- 24 Plain washers (005-111-00)
- 16 Locking hex nuts (006-126-00)
- 16 Hex screws (007-177-00)
- Distance between bolt holes center to center: 8"
Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets.
K71-707-02 Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Installation Details
Video of Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dexter Axle Torflex Lift Kit Review
Hi there, trailer owners. Today, we're going to be taking a look at Dexter's Torflex Lift Kit. These are compatible with Dexter's Torflex Axles. This truck lift kit is going to work with your Dexter Axles and your trailer to raise your trailer up. This is going to help level out your trailer. If your truck sits too high, leaving the front end of your trailer jacked up and the back of your trailer down when you're hauling your trailer, this could lead to scraping at the back of your trailer due to the angle, angling it down.
And by leveling out our trailer, it also helps to load the tongue weight properly on our truck. So this is overall just going to increase the driving experience that we're going to feel when hauling our trailer.Our customer had an issue with his truck being too high for his trailer, causing it to haul unlevel. After we got done installing the components here, we can see that our trailer is completely level all the way down, which is going to increase the driving experience inside of our truck just due to the way our trailer is going to handle. The weight's going to be properly distributed onto the back of our truck, which is going to allow us to get proper braking and handling performance at the front. Our customer also has a weight distribution system on here as well to help even out that weight.
All these components are going to work together just to give you the smoothest and best handling performance when driving your truck down the road when hauling your trailer.Other issues some trailers can run into, particularly if they have the swing out arm styles for their support system, is that in certain areas, depending on how level the ground is where you're at and if there's any rough terrain, some of those arms may hit the ground when you're trying to swing them out and then you can't level properly. You have to move it around and adjust until you can find that sweet spot. Lifting the trailer up a couple of inches is going to give you that clearance that you're going to need, so you can more easily get set up and ready to go at your campsite.And this is what our lift kit looks like when it's installed. I've got the wheels off so that you can see the spacers in place here between our axle and the frame. That's where it goes.
Going to give us greater clearance to the ground, so when we're hauling our trailer, we don't have to worry about as much issues with scraping on the ground, particularly if we have leveling jacks and things like that that are hanging down below. And in some cases, depending on your campsite where you park it, you may be so low to the ground in that particular spot that you can't even use your landing gear properly to level out your trailer because they just don't quite meet where they need to.By lifting it up, we get more room to work with on our landing gear so we can get those legs swung out and everything set up properly. And it can also help out with getting it properly set up with your truck. If your truck's lifted up higher than your trailer, then you can haul it uneven. And you want to try to haul it as even as possible to have the proper load and tongue weight on your truck's hitch at the back.
So something like this is going to lift it up and provide that for you. And you can see it comes with all the hardware that we need, brand new hardware for attaching both our axle to our bracket, as well as attaching our bracket to our trailer.One thing you'll want to keep in mind when performing this installation is that you are increasing the distance between your axle and your trailer here by about this much. And depending on your brakes that you have installed, whether they are electric or hydraulic, you may need to extend the wires or the hydraulic lines in order for this system to work properly with your trailer. On the one that we installed today, we did have to add a few inches to the wiring in order to lower it down and be able to have proper travel of our suspension without damaging the wires that go to our electric brakes. And when it comes to the installation, it's considerably easier than many other style of lift kits for different style of suspension.With this style here, with the TorkLift Axles, it's as simple as lifting your trailer up to where it hangs off the ground. You want to give yourself a considerable gap between the ground and your tires when you got it up to ensure that once you get your kit installed, you can get your wheels back on if you did take those off. I would recommend at least four inches between that when lifting it up. But once you got it lifted up, it's as simple as placing your jack underneath, lowering down one side, installing the spacer, and then moving onto the next one. I'd recommend finishing up this axle, doing the other side, and then moving on to your next one. And that completes our look at the Torflex Lift Kit.
Customer Satisfaction Score:
84% were satisfied with this product
16% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift - K71-707-02
Average Customer Rating: 4.6 out of 5 stars (546 Customer Reviews)
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.by: Tom S.09/28/2023
This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.
by: Darrin12/03/2022
Though I have not yet installed the Lift Kit, previous reviews confirm they will work well on my Escape 5.0 TA fifth wheel. Being in Canada and hearing about the poor condition of packages and product being delivered, I had some concerns. However not only did the package arrive sooner than expected, it was fully intact and in good condition. My overall experience with eTrailer has been flawless - thank you!
by: Andy03/20/2024
This was a very easy install in the driveway. Only a couple hours start to finish.
by: Tim03/28/2024
Arrived quickly just like always with etrailer. The box appears to have been opened and retaped. All the hardware was included. The paint on each of the brackets has been scratched off in many places. So much so, that I will paint them before installing.
by: Patrick04/21/2024
The package arrived quickly as they said it would. I installed it as per the instructions and the job was easy. My Trail Lite Camper trailer has tandem axles so it was easy to just drive one set of axles up on ramps and install the lift kit on the hanging axle with the trailer hooked to the truck with the brakes locked on the truck. Anyhow, this lift kit was easy to install and did the job of raising the rear of the trailer from 14" to 18" after installation. Everything fit perfectly thanks to talking with Alex of etrailer.com and getting the right kit for my Dexter #10 Torflex axles. Attached are some pictures of before the install, during and after the install. I'm very satisfied. FYI the project goes a lot faster if you have an electric or pneumatic impact wrench to remove the old rusted mounting bolts and installing the new bolts.
by: Philip05/08/2023
The box looked it was previously shipped to someone else, the bag of parts was open and missing a bolt.
Also, the instructions were missing pages.
Katrina B.
5/15/2023
Yikes! Lets get you over to customer service so they can get you those missing pieces.
by: Carl 11/15/2023
Peace of mind is included in the kit! After damaging the steps on our Lance 1995 pulling out of a driveway, I decided it was time to install a lift kit. Installation took a few hours with the help of a friend and his flat driveway. The installation is relatively simple but not for the faint of heart. We jacked up one side at a time, inserted a couple of jack stands, unbolted the axles, and installed the spacers. It's a little tricky reaching all the bolts and nuts, but doable. We've since travelled about 6200 miles with no issues. Nice to know I don't have to be quite as careful pulling out of driveways.
by: Steve08/26/2023
The product shipped fast, but in a broken up box. The parts were scattered throughout and looked used. I was missing some washers and a nut. Included in the box was some parts that didn’t belong with the order. Plus a flat head screw driver insert. For XXX dollars plus tax, the parts could have at least been put in a bag or something. It looks like I got someone else’s return. Not what I expected from etrailer. Waiting for a response from them. I sent pictures and asked if they received them. Nothing back from them yet.
Jenny N.
8/31/2023
My goodness that is not great to hear. I will have our Customer Service team reach out to you.
by: James03/05/2024
Awesome experience. I miss-ordered and Kelly quickly got everything straightened out for me. She then expedited the correct kit for me straight to the installation shop!
She emailed me a return authorization UPS shipment voucher minutes later. Outstanding support!
by: David D04/08/2018
I ordered the Dexter K71-707-02 lift kit for my Haulmark Transport trailer. It was on back order and took two weeks to arrive but etailer.com communicate this to me with a phone call. I thought that was great customer service since most companies these days just email if anything.
The product arrive as described accept for the poor quality finish. I stripped it down and re-painted it. That was not such a big deal since I painted all the parts as I installed them and touched up my axle, hubs and under body while the wheels were off. It installed easily and raised my trailer just as I needed. My trailer was so low it scraped on drives and the rear stabilizer jacks did not have enough room to deploy.
Tip: The nuts in this kit are locking nuts and require a considerable amount of torque to tighten them. I used a pneumatic impact gun that made the job go much quicker.
by: Bryan07/05/2020
Installed lift on Lance 1985 to get the extra clearance for taking the trailer off road.
Product is great, and it was a simple install (took right at 3 hours). I had to buy a 15/16" wrench in order to fit in the tight space, especially when doing the bolt in the side while the bolt to the bottom was in place. Torquing the nuts was a chore now that I am getting older. :)
I used two jacks, one on each side of the axle to lower it uniformly (floor jack and bottle jack). I used two jack stands to hold up the trailer with wheels removed. (I had to raise the jack stands on wood to get the required elevation when I went to mount the tires.) Tools required were 15/16" open end wrench, 15/16" socket with 1/2" drive ratchet, 1/2" drive torque wrench capable of 150 ftlbs. I also used a 1/2" drive adjustable cheater bar to pry the existing bolts loose.
by: Daniel 01/09/2024
I installed these a year ago on my camper and I took about a dozen camping trips. The parts haven't moved and are still nice and tight. I would definitely order them again.
by: Clayton11/18/2023
The lift kit is just what I expected. The delivery was delayed one week. The package was damaged and re-taped. The bag holding the nuts and bolts was busted open and some of them were missing.
by: Paul03/27/2021
I gave it a 3 based on my experience with installation, however it may have been the axles themselves that were the problem.
1) Couldn’t find a match on the etrailer website, so I had to speak with a rep to only give me Dexter axle’s phone number.
2) The first location for calling Dexter axle couldn’t help me either, so they gave me the number for where they were manufactured (tandem axles).
3) The 3rd call matched the serial numbers of my axles finally and gave me the kit # to order from etrailer.
4) The holes in the lift brackets were drilled for a minimum of 8” o/c, which was perfect for the trailer, but the axles were drilled at 7.75” o/c. This meant having to slot mill all 4 bracket for the axles .25” on each side for bolt clearance.
5) The original nuts and bolts that came off of my axles and trailer were .5” dia bolts, but the ones that came with the kit were WAY too big meaning I needed to either oversize (ream the axle and trailer holes) or buy new bolts, which is what I did.
It has nothing to do with etrailers service. Just wanted people to know what they’re getting into with these lifts sometimes! :
by: Charles07/22/2019
I needed this axle spacer kit due to insufficient wheel well clearance on the used 2008 Jayco trailer we purchased (it turns out that ~2400 trailers left the factory missing this spacer back in 2008).
These spacers arrived quickly and in fine condition. They fit perfectly. NOTE: Installation went ok, but I did this in a campground, on gravel, and in 95-100° heat, so it was not easy and took me 2 full days. If someone performed this in cooler weather on a hard, flat surface it would go faster.
Very satisfied with the quality and with etrailer (I have used etrailer 3 times prior and have had no problems).
by: Daren04/12/2019
I cannot comment on the installation as I had a mobile mechanic friend install it. 4hrs is what he charged me.
The stance is much improved. I should have done it years ago.
Daren C.
4/13/2020
We sold the trailer to family. Th we y have towed for over 1000 miles with NO issues.
by: Harold08/31/2023
Missing 2 nuts, 2 bolts, 2 washers. Kit is useless without all th parts.
Jenny N.
9/6/2023
I want you to have all the hardware that comes with the kit. I will have our Customer Service team reach out to you.
by: Mike12/12/2020
Great kit, great instructions. Took two of us less than two hours to install including relocating brake wires. (However the trailer floor had been removed to resolve other issues and I do trailer repairs for a living) This is exactly what my enclosed trailer needed along with going to a 225 series tire from a 205 I achieved 3” of lift. There were a couple scratches in the paint on my parts but if a guy was really worried a quick touch with a spray can would be fine. I put em on as is. etrailer had these parts to me in under a week on the left coast.
by: Charles 09/23/2023
perfect, nice lift parts are well made,easy to install,i replaced both axles same time on 1997 airstream,
by: Uhgggggh12/09/2022
Kit worked fine, but it arrived missing several washers. Thankfully I had another kit for our other trailer, so I used some from that kit. Unfortunately, etrailer made getting a few replacement washers 10 times harder than getting the kits. After numerous emails asking several questions;then wanting pictures of the kit and instructions days after it all went in the trash post installation, I'll just buy my own replacement parts. You would think I was asking for a new free kit. Just wanted enough washers to install the other kit.
by: Michael01/24/2023
Does not have the mounting holes to allow me to space the axle. I will have to drill additional hole 180 degrees of
Jenny N.
1/27/2023
I wanted to ask you more about your experience with the lift kit. You should not have to drill any additional holes and I wanted to ask you a few questions. Would you be able to send a picture? Do you have a #10 Torflex axle?
Jenny N.
2/1/2023
I wanted to ask you more about your experience with the lift kit. You should not have to drill any additional holes and I wanted to ask you a few questions. Would you be able to send a picture? Do you have a #10 Torflex axle?
by: Douglas 07/21/2020
Don't expect the paint on the Brackets to be whole, there is no way they can be with how they are packaged. Regardless, this is a very easy to install lift if you have any mechanical abilities and tools to safely lift your trailer. I called to several RV shops in my area and was quoted 800.00 - 2000.00 to install this kit. It took me 2 hours including hooking the truck to the trailer, gathering tools. Very straight forward install and is as described on the website. We have a 2014 Flagstaff Classic Ultra Light fifth wheel which is 1.5 ton towable and with our 1 ton sitting so high at stock ride height, the rear bumper of the trailer was close to dragging at the slightest dip. Well made and easy to install.
Douglas H.
7/22/2021
Still working great after a year of use. We have teaveled about 5,000 miles with the lift kit and it has continued to performed flawlessly.
by: K. J. Smith09/01/2022
I had an RV service center put the kit on. But in doing so it did lift the trailer enough that I'm not wiping out my back steps and rear bumper as much as I was. I'm really happy with the product and the service center. And happy that I did fine the lift kit. Thank you etrailer.
by: Jeffrey 11/21/2023
Fast Service
by: Rex08/26/2023
The product is excellent. I'm taking off a start because the packaging was terrible. It came in a cardboard box with one piece of tape holding it together. It blew out the second I picked it up, and damaged the cabinet surface that everything fell onto.
25
544
Show More Reviews
See what our Experts say about this Dexter Trailer Leaf Spring Suspension
- Axle Lift Kit Recommendation for 2007 Trail Cruiser 23BHI'm pretty sure you have Dexter torsion axles on your 2007 Trail Cruiser 23bh but I was not able to totally confirm that. Could you check the axles to see if they are torsion style? Look for a label on the axle that has the capacity info listed as well. With that info I can determine the lift you'd need.
view full answer... - Lift Kit for a 2021 Forest River IBEX Travel TrailerI would be happy to but I need some more information! I wasn't able to find anything on the Lippert v000500282 part number you gave me. The Torflex Lift Kit item # K71-707-02 you were looking at is designed for Torflex axles. In order to determine if this is what you need I'll need to see a picture of the axle tag off one of your trailer axles. If you could email that to me I would be more then happy to find you the correct lift kit.
view full answer... - What Dexter Lift Kit Will Fit A 2021 Globetrotter 25' AirstreamHello David. I can certainly point you in the right direction. When selecting a lift kit, we need to consider the axle type and the weight capacity of each axle. For example the Torflex Lift Kit # K71-707-02 that you were looking at will work with #10 Torflex (torsion) axles with 2,300 to 4,000-lb capacities. I do not have a way to look up the exact axle type or capacity that your trailer is currently equipped with. Please do confirm the weight capacity and axle type. Feel free to post...
view full answer... - Lift Kit That Fits 2021 Lane 2375 Travel TrailerHey Mark, your 2021 Lance 2375 travel trailer will have came with #10 Torflex axles rated at 3,900lbs per axle. The Torflex Lift Kit # K71-707-02 will provide you with a 2-5/8" lift for your trailer.
view full answer... - Potential Lift Kit For 2011 Lance 2185 Travel Trailer With Torsion AxlesBased on the 6,000 lb GVWR of your tandem axle 2011 Lance 2185 travel trailer, the option that is most likely to work is the Torflex Lift Kit - Tandem Axle # K71-707-02. However, you do need to verify that your Lance travel trailer has a Dexter #10 Torflex axle with a capacity between 2,300 and 4,000 lbs, which is something that should be on the axle tag or sticker. If that's what you have, the # K71-707-02 is the right kit for you.
view full answer... - Is It Possible To Gain Wheel Well Clearance With Axle Already FlippedThe general rule is you want to keep 3 inches of vertical clearance above the top of the tire to the wheel well to allow for normal travel of the trailer's suspension. You could try to use longer hangers on the suspension to gain a little lift but it's not really possible to gain 3-4 inches if you already have to the axle flipped. I recommend to use smaller tires. I have attached a link to all of the hangers available. If you let me know your tire size I can help you further. If you let...
view full answer... - Which Lift Kit for 2007 Jayco Jay Feather LGT 29DSince it's a Dexter Torflex axle with a 3,500 lb capacity it's a # 10 Torflex and the correct lift kit would be the part # K71-707-02 for your 2007 Jayco Jay Feather LGT 29D.
view full answer... - Fit of Dexter K71-707-02 Torsion Axle Lift Kit on Tandem Axle TrailerThe lift kit for torsion axles you need will be specific to which model axle you have. f the trailer in question has a Dexter # 10 Torflex torsion axle whose mounting brackets are shorter than 3 inches tall, then yes the # K71-707-02 lift kit will indeed work. For a dual axle trailer, you'll need two of the kits. If you have a different axle, please reply with the details and I'd be happy to assist with a lift kit. I've linked you to a product description video featuring the # K71-707-02...
view full answer... - How to Determine Correct Lift Kit for Torflex Axles on 2006 Fleetwood OrbitWe may have a lift kit that will work for your 2006 Fleetwood Orbit, but don't have any way of knowing what axle you have on your trailer. It's pretty easy to determine though, as all you'll need to do is check the axle for a sticker or tag that will have the identifier on it. Once you find that out we do have lift kits for a number of different axles. It looks like a 2006 Orbit was a pretty light tandem axle trailer, and if it has #10 Torflex axles with 2,300 to 4,000l b capacities...
view full answer... - Possible Lift Kit Recommendation for Trailer with 3k Rated Torsion AxlesIf the torsion axles of your trailer are Dexter Torflex axles #10 we have the lift kit part # K71-707-02 which will work well. The distance between the mounting holes of this kit is 8 inches. If you have a different brand though we won't have a solution. On the axle you should be able to find a brand and part number for the axles.
view full answer... - Tandem Axle Lift Kit for 2018 Minni Winnebago 2106DSSince we know your 2018 Minnie Winnebago 2106DS has a Tor-Flex 3,500 lb trailer axle setup the correct lift kit you'd need is the part # K71-707-02.
view full answer... - What Lift Kit Will Fit a 1986 Airstream Sovereign 29' Tandem Axle Travel Trailer? While I have no way to see exactly what axles and suspension are under your 1986 Airstream Sovereign I can help you to determine what you will need. I know Airstream typically uses torsion axles and it looks like your travel trailer has a axle rating of around 3,400lbs per axle which is commonly the #10 Torflex rating. We have the 2-5/8" Lift Kit # K71-707-02 for that capacity axle. You can verify if this is correct by measuring the attachment holes. The #10 Torflex has the mounting holes...
view full answer... - Single or Double Axle Lift Kit For Lance 1885 Travel TrailerFor your 2012 Lance 1885 Travel Trailer, between the two lift kits you mentioned, you will want the double axle kit, which is the following part number: - Torflex Lift Kit - Tandem Axle # K71-707-02
view full answer... - Is There Lift Kit that Fits 2005 Jayco Jay Feather Travel TrailerHey Orlando, most likely the lift kit you need is the part # K71-707-02 for your 2005 Jayco Jay Feather based on previous customers but you would want to make sure you have Dexter Torflex axles that have a capacity between 2,300 and 4,000 lbs.
view full answer... - Torflex Lift Kit for 2019 Lance 1995 Travel TrailerBased on some research, I was able to find out that your tandem axle 2019 Lance 1995 travel trailer has a GVWR of 5,700 lbs, and does use Dexter Torflex torsion axles like you mentioned, so the correct lift kit is the Torflex Lift Kit - Tandem Axle # K71-707-02. This kit fits #10 Torflex axles with 2,300 lb to 4,000 lb capacities, a range your axles fall into, and we have also had customers come back and tell us that these are a fit for their Lance trailers, as you can see by the accompanying...
view full answer...
- Do Trailer Axles have to be Aligned After Installing Torflex Lift Kit K71-707-02Torflex Lift Kit - Tandem Axle - 2-5/8" Lift Item # K71-707-02 doesn't require that you have your axles aligned after installation but it is good practice to do so. It is actually easier than you might think. Basically, measure from center of the trailer coupler to the center of the axle on each end. Be sure to measure from exactly the same point on the coupler! You want the measurements to be exact up to 1/16 of an inch difference. On a tandem axle trailer once you have the front axle...
view full answer...
- Lift Kit For #10 Dexter Torflex AxleIt's ok if you have 2,200 lb axles; so long as you have a #10 Dexter Torflex Axle the correct lift kit is the following: - Torflex Lift Kit - Tandem Axle # K71-707-02
view full answer... - Option For Lift Kit For Tandem Axle Trailer With Torsion AxleWe do have one possible option that will work for your 3,500 lb tandem torsion axles. It is from Dexter, and does require you to have the #10 Torflex axles. So you'll need to check the sticker/placard on your axle to see if you have that, and if you do then you can use the Torflex Lift Kit - Tandem Axle # K71-707-02.
view full answer... - Trailer Lift Kit for my 2002 Towlite HiLo with Torsion Axles With 8 Mounting CentersYes the Torflex Lift Kit - Tandem Axle part # K71-707-02 will give your trailer 2 5/8" of lift. It is designed specifically for the #10 Torflex application and includes all of the hardware you will need for your installation. The only stipulation is that it won't work with a top mount or 3" tall hanger but it appears you're in good shape.
view full answer... - Determining if 2014 Rockwood Signature UltraLight 8282WS Has Lift Kit for ItLift bracket info isn't listed on the axle info sticker like what you attached but what you can do is check out the picture I attached of the # K71-707-02 installed and then compare that to what your axle has. If you see a taller bracket than what's pictured or basically what might look like a lift kit then this wouldn't fit, but otherwise it would.
view full answer...
- Does 2017 Lance 2285 have Dexter # 10 AxleYes your 2017 Lance 2285 has Dexter # 10 axles so the lift kit part # K71-707-02 that you referenced would work for you.
view full answer...
- Tandem Torsion Axle Lift Kit for # 10 Side-Mounted Torflex AxlesThe Winnebago Micro Minnie 2106DS tandem axle travel trailer has a GVWR of 7000-lbs so it will have two 3500-lb axles. So long as the axles are # 10 Torflex types attached to side-mount brackets you can use lift kit # K71-707-02 to gain 2-5/8-inches of height. This kit CANNOT be used with top-mounted brackets or Torflex axles with 3-inch high profile brackets. You can confirm with Winnebago what axles are on your travel trailer by contacting them with your VIN.
view full answer... - Lift Kit that Fits 2017 Lance 1685 TrailerSince your 2017 Lance 1685 has tandem Torflex #10 axles the tandem axle lift kit you'd need is the part # K71-707-02.
view full answer... - Correct Lift Kit for an Aluma 8216 Tilt TrailerThe Torflex Lift Kit part # K71-707-02 is correct for your 2020 Aluma 8216 Tilt Trailer as you have 3,500 Lb Dexter Torflex #10 Axles. This kit provides you with a 2-5/8" lift which is currently all that is available. The bolt holes on this lift block are 8" apart on center so they will match what you have now.
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Used Items Available
Condition: Surface Scratches
Notes: Parts are chipped and scratched up, otherwise fine.
Condition: Surface Scratches
Notes: Item has several scratches and paint damage ont he metal. Otherwise new and unused.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Video Edited:
Chris R
Written by:
Wilson B
Video by:
Jonathan Y
Updated by:
Brian T
Updated by:
Noah M
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Darrin
12/4/2023
Installed the lift kit, followed the instructions and it went very smoothly, took a couple hours with a buddy. 5th wheel now rides level with my F150, product worked as specified, and will continue future purchases with eTrailer as their service and responsiveness is above competitors in our experience.