Global Link Replacement Roller for RV Slide Out - Surface Mount

Video Transcript for Review of Global Link RV Slide Out Parts - Replacement Roller - 295-000181

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today, we're taking a look at the Replacement Roller for RV Slide Outs. This is just going to be a surface mounted roller to help that slide out move easily in and out. So this is going to have a nice black powder coat steel bracket to hold that in place. The roller itself is made out of a nylon material so it should last for a long time.The bracket measures about four and 5/8 inches long.

If we go to the ends of our bolt though and the bolt and nut, it's about five and a quarter inch long. Side to side, it's about three and a half inches wide and about two and a quarter inch tall, going to the top of that roller there. The roller itself measures about four and an eighth inch long and has a diameter of a little over an inch, maybe about an inch and an eighth.We do have some mounting holes here that does not come with hardware, so you will have to pick up some hardware on your own or reuse the existing hardware from your old roller. Distance between those center to center is roughly one and 7/8 inches. Each of those slots is about three quarters of an inch long and the center or the narrowest distance between those is about one and 5/8 inches, and the widest between them is about three inches.That's pretty much it as far as our look at the Replacement Roller for your RV Slide Outs.

If you need any other accessories to go with your RV or replacement parts, we have a lot of options available, including different configurations of the rollers. So you can get back out on the road and rolling again. Thanks for watching. We'll see you next time.