Filter by Where it Mounts
$55.56 - $215.20
Videos
for RV Skid Wheels
Help Articles
for RV Skid Wheels
Expert Answers
for RV Skid Wheels
For your application there really is only going to be a weld on solution that's reasonable like the part #UF48-979022 that you referenced. The frame dimensions are unknown so a weld solution would be better since that really doesn't…
view full answer...I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This…
view full answer...Hey Lisa, To flat tow your 2020 Jeep Grand Cherokee Trailhawk you'll need the Blue Ox Tow Bar Wiring Kit #BLU86XR. This wiring harness comes with connectors to plug inline with your factory tail light wiring. If you haven't picked out…
view full answer...For your 30 foot 5th wheel I really like the frame mount skid wheels that can swivel. For that the Ultra Fab kit part #UF48-979011 would be your best option. I attached a picture that shows these attached to a trailer frame as well. These…
view full answer...From the sounds of your situation the Ultra-Fab Skid Wheels #UF48-979014 seem to be a great solution. Sure beats damaging your driveway. These are designed to attach to 2-1/2 inch square hitch tube on the motorhome. If you don't have this you…
view full answer...I certainly do. For this you are going to want to install skid wheels which will take some of the brunt off your trailer. For this I recommend using the Ultra-Fab Steel Jumbo Roller part #UF48-979023. These skid wheels will need to be welded on the…
view full answer...The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, #UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, #UF48-979013, 7-3/4 inches. I have attached a photo for you showing these…
view full answer...I do have an option for you. Due to the length of your 5th wheel and size of your bumper, we do not have a bolt-on option available. That being said, you can use the Ultra-Fab Steel Jumbo Roller for Trailers and RVs #UF48-979023 which is a weld-on…
view full answer...The Roadmaster Rollaway Trailer Hitch Protector #RM-050 will likely work with your trailer hitch that has the tabs on the bottom of the receiver as there does not look like there is going to be any interference. So long as the tabs are completely on…
view full answer...We do not have the CAD drawings or blueprints for the Ultra-Fab Steel Roller, part #UF48-979020, but I have attached a photo of the roller with dimensions shown. The mounting bracket measures 1-1/4 inches from the center of the hitch pin hole to the…
view full answer...Yes, there is trimming required for the installation of the etrailer Hitch Receiver #e56RR. The trimming involves part of the underside fascia panel. I went ahead and attached a photo of the trimming area and dimensions.
view full answer...Adding skid wheels to your open car trailer is indeed what I recommend to help prevent the trailer from dragging when going up a steep driveway. These are designed specifically for this very purpose and will work well. I recommend taking a look at…
view full answer...