Ark Drop Down Corner RV Stabilizer Jacks - 33" Long Corner Steadies - Black - Qty 2

Video Transcript for Review of Ark Camper Jacks - Corner Stabilizer Jacks - ARK77FR

Hello everybody, this is Jeff at "etrailer.com". Today we're gonna take a look at the Ark drop down 33 inch long corner stabilizer jacks, for a quantity of two jacks. Now this stabilizer kit will come with all the necessary equipment to minimize chassis movement in your camper or your trailer. It includes the two jacks here and the winding handle. Now for this video you can see I've extended this one all the way out and this one's fully retracted. Just give you idea of the difference in the two.

Now these are corner stabilizer jacks. Let me zoom in just a little bit and lift one up for you. These corners stabilizer jacks will help keep your chassis secure. They use a twin pin locking swivel bracket here, with a multi positioning plate that offer many different angles for your leg. So what you can do is raise up this handle right here and that'll pull out the two pins that are spring loaded, so if you pull that out it'll release the leg here and you can move this leg into many different positions for your application.

I then want to pop up an insert just to show you. There it is at a certain angle. So you can put it in whatever you angle, angle you need for your application. The handle itself right up here is a nice fold away large grip handle for comfortable and easy swiveling of the jack plate. The foot plates on the very bottom here you can see they are a large load bearing foot plate they're ideal for soft ground.

And you can see they do a swivel to accommodate different terrain. Now when the jack is fully retracted like this one is right now, that foot will lock into place. The footplate itself measures 7 and 1/2 inches long by about 4 inches wide. Now the winding handle we mentioned it comes with has a 3/4 inch hex drive socket on the end and that'll attach right here. And when you attach it right there what you can do is crank this and as you crank this clockwise, it extends out your jack so you can get whatever height you need.

You extend it out by cranking it, and if you turn a counterclockwise, it retracts the leg back in. So this inner tube will go up or down in there. Now the measurements I gotta fully retract it. On the fully extended height which is this one over here from very bottom to the top is 33 inches. This one in the fully retracted from the bottom to the top is 24 inches. The mounting brackets are right up at the top here. Have the bolts on here. The mounting brackets will be welded to your trailer. It is a weld on installation. And then the hardware is used to attach the jacks to the mounting brackets. It's all included. They are heavy duty mounting brackets. Now if you notice, all the parts are an nice corrosion rust resistant black powder coat finish. Has a 600 hour salt spray rating. And one thing I do wanna mention about these jacks, these stabilizer jacks are not designed to do any lifting of any weight. They are only used to stabilize your camper or your trailer. But that should do it for the review on the Ark dropdown 33 inch long corner stabilizer jacks for a quantity of two.