How Do The Roller Bunks Attach to Roller Bunk Bracket # DL21762
Question:
How do the Boat Trailer Standard Roller Bunk - 4 Long- 10 Sets of 2 Rollers - by Dutton-Lainson attach to the Dutton-Lainson Boat Trailer Parts - DL21762 Roller Bunk Bracket? Is the hook part of bracket what connects to the roller bunk? or are additional bolts and nuts required to connect these two parts if so does bracket or bunk come with the bolts and nuts and washers? Next question: do you need to order four Dutton-Lainson Boat Trailer Parts # DL21762 Roller Bunk Bracket, for the Roller Bunk - 4 Long- 10 Sets of 2 Rollers part # DL21754? Next question: How does the Dutton-Lainson Boat Trailer Parts - DL21762 Roller Bunk Bracket attach to the existing trailer? and do these come with needed bolts and nuts parts, if not what is used a U-bolt, washer, nuts, or do you half to make holes in the trailer to put bolts and washer and nuts through to attach the bracket?
asked by: Ted B
Expert Reply:
The roller bunks themselves, like # DL21755, have holes on the bottom at either end. You place a bolt through these holes. The hook part of the bracket, # DL21762, goes around the the bolt underneath the rollers. The slotted portion of the bracket is then bolted to the trailer or existing wooden bunks. The holes are slotted so it can be adjusted higher or lower on the bolts.
The roller bunk brackets, # DL21762, are sold in quantities of 1 but a total of 4 are needed to mount a pair of roller bunks. The brackets and the rollers do not come with hardware so you will need to provide your own.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- 3 Inch Wide
- Zinc-Plated Steel
- 10-3/4 Inch Long
- Dutton-Lainson
more information >
Continue Researching
- Q&A: What Is Center-To-Center Dimension Of Slots On Dutton-Lainson Boat Trailer Roller Bunk Bracket
- Q&A: What Size Bolts to Use to Install Dutton Lainson Roller Bunks
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Will Thule Force XT Sport Rooftop Cargo Box Fit Factory Crossbars On 2015 Chevrolet Equinox
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How To Identify Replacement Motor For Fifth Wheel Slide Out
- Q&A: Replacement for Magnetek 6345 45 Amp Power Converter
- Q&A: Additional Height of Boat Trailer Standard Roller Bunk # DL21754 When Mounted on Bunk Boards
- Q&A: Angle to Install Dutton Lainson # DL21741 Bunk Rollers for Grumman Deep V Hull
- Article: Best Boat Trailer Tires
- Article: Trailer Tire Sizing
- Article: How to Bleed Your Trailer Surge Brakes