Recommendations for Boat Trailer Roller Bunks for a 2400 Pound Boat
Question:
The 4 ft. black roller bunks indicate that the rollers pivot to match the bottom of the boat. Currently my carpeted bunks do no align with the hull. Do the 5 ft galvanized bunks also pivot? My boat is about 2400 lbs. Should I go with the 5 ft. bunks? thank you,
asked by: Ken B
Expert Reply:
First off, there may be a solution to the bunks not aligning with the hull. With the Dutton-Lainson roller bunks we offer, you can also get Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks, # DL21762, for the pivoting black steel roller bunks, or # DL21742, for the galvanized. These brackets allow the roller bunks to be adjusted vertically from the trailer and angled to cradle the boat hull.
Neither galvanized roller bunks, # DL21741, and # DL21740, will pivot. But both black steel models will pivot.
In terms of capacity, both the galvanized and black steel 4 foot models can hold 2,500 pounds. The 5 foot models can hold 3,000 pounds. I would recommend the 5 foot models as it can be easy to overload the roller bunks if your boat is already 2,400 pounds. After accounting for all of your cargo and any residual water in the boat, that extra 500 pounds capacity between the two lengths will come in handy.
So for a pivoting roller bunk, I recommend the Boat Trailer Standard Roller Bunk - 5 foot Long - 10 Sets of 2 Rollers, # DL21755. These roller bunks will give you 3,000 pounds capacity and can be adjusted and angled using Bracket # DL21762 (four are needed to mount a pair of roller brackets).
Products Referenced in This Question
Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 & DL21741
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- Zinc-Plated Steel
- Dutton-Lainson
more information >
Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- 3 Inch Wide
- Zinc-Plated Steel
- 10-3/4 Inch Long
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Continue Researching
- Q&A: How Far Should Rollers Install Behind Rear of Trailer Frame
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: Trailer Lighting Requirements
- Q&A: How Wide is Channel of Boat Trailer Standard Roller Bunk # DL21754 that Installs on Board
- Q&A: High Speed Trailer Tire that Fits 12 inch Wheel
- Q&A: Can Trailer Roller Bunks be Installed on Flat Side of Bunk Board
- Q&A: Can Deluxe Roller Bunks be Used to Replace 4 Wobble Type Rollers on Boat Trailer
- Q&A: Overall Height Measurement From Top of Roller to Bottom of U Channel on DL21741 Roller Bunk
- Q&A: Will Using Roller Bunks on a Boat Trailer Damage the Boat
- Article: RV Cell Boosters, How Do They Work?
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Maintenance Schedule
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Where to Position the Trailer Axle?