What Are Dimensions Of Dutton Lainson Roller Bunk Brackets
Question:
What is the maximum height achieved with the roller bunk bracket # DL21762 bolted to the trailer frame? Thanks.
asked by: Terry T
Expert Reply:
The slots in the Boat Trailer Roller Bunk Bracket, part # DL21762 are 7-1/4 inches long so you will be able to use that length to move the brackets where you need them on your trailer frame.
Here are the dimensions of the brackets you may find helpful. I have also included a photo of the bracket you can check out.
10-3/4 Inches Overall length
3 Inches Overall Width
2-3/4 Inches Inside Width
7-1/4 Inches Slot Length
7/16 Inch Slot width
3 Inches from Top of Bracket to the Start of the Slots
10-3/8 Inches from Top of Bracket to the End of the Slots
Products Referenced in This Question
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- 3 Inch Wide
- Zinc-Plated Steel
- 10-3/4 Inch Long
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Continue Researching
- Video: Review of Dutton-Lainson Boat Trailer Parts - Boat Trailer Roller Bunk Bracket - DL21762
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Shop: Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21754 & DL21755
- Q&A: Can the Dutton-Lainson Bunk Board Bracket DL21762 Rotate to Match Hull Angle
- Q&A: Roller Bunks Rated for More Than 1,500 lbs
- Q&A: Can Pontoon Boat Be Stored On Roller Bunks Over Winter
- Video: CE Smith Bolster and Swivel Bracket Assemblies Review
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10003G-4
- Shop: CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs
- Shop: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 16-1/4" - Qty 4
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Search Results: 68149
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Shop: Brake Controller
- Search Results: dust cap
- Article: Trailer Tire Sizing