Height to Top of Roller with Bracket # CE10305G and Roller # YR12243-5 from Mounting Surface
Question:
If a 2.5inch x 12inch roller YR12243-5 were installed in the 12inch bracket CE10305G on a 5/8inch shaft 408400, what would be the exact vertical distance between the top of the roller and the board on which the bracket would be installed? From the picture it looks like the center of the hole would be about 2.5above the board right? which when added to the 1.25inch radius of the 2.5inch roller would make the answer to be 3.75inch less any slack which would be what? between the roller and the shaft. Is this right? This distance is critical in my unique installation.
asked by: James N
Helpful Expert Reply:
The top of the roller will end up being 4 inches from the mounting surface.
The hole on the # CE10305G is 2-3/4 inches from the mounting surface, and then half of the diameter of the roller part # YR12243-5 is 1-1/2 inches.
Product Page this Question was Asked From
CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel
- Boat Trailer Parts
- Rollers
- Roller Bracket
- Galvanized Steel
- CE Smith
more information >
Continue Researching
- Video: Ark Ezi-Guides Self-Aligning Boat Trailer Loading System Review
- Video: Review of Ark Boat Trailer Parts - Guides - AR84FR
- Q&A: Self Centering Keel Roller and Mounting Hardware For Boat Trailer
- Q&A: How To Help With Centering Boat On Trailer When Loading
- Q&A: Can CE Smith Keel Roller CE29505 Be Installed On Boat Trailer W/ Bunk Boards?
- Shop: CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel
- Shop: CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 2
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8"
- Shop: Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 16' to 20' Long Power Boat
- Shop: Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 20' to 28' Long Power Boat
- Search Results: yates 343r roller
- Shop: Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 5/8" Shaft - Qty 1
- Q&A: Where To Install a CE Smith Self Centering Keel Roller
- Q&A: Which Crossmembers Will Benefit Most on Boat Trailer from CE Smith Self-Centering Keel Roller
- Q&A: Could More than one of the CE Smith Self Centering Keel Roller be Installed on Trailer
- Q&A: Should Keel Rollers Touch the Bottom of the Boat
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10305G
- Search Results: yates boat trailer rollers
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR135-5Y Review
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Search Results: centering roller
- Search Results: boat trailer roller
- Video: CE Smith Galvanized U-Bolts Review
- Video: CE Smith Boat Trailer Parts CE15274A Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE15283GA-2 Review
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)