Replacement Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 2" - 5/8" Pin Hole
(26 reviews)
Price: $8.05
In Stock
Replacement Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 2" - 5/8" Pin Hole
Item # TJP-IP58-CTN
Our Price: $8.05
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (26)
- Q & A (0)
- Videos (1)
- Photos
etrailer Accessories and Parts - TJP-IP58-CTN
- Camper Jacks
- Trailer Jack
- Pipe Mounts
- etrailer
Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack. Pipe has an outer diameter of 2" and a pin hole diameter of 5/8".
Features:
- Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack
Specs:
- Diameter:
- Outer: 2"
- Inner: 1-1/2"
- Pin hole: 5/8"
- Length:
- Longer edge to center of pin hole: 1-1/2"
- Shorter edge to center of pin hole: 3/4"
- Depth: 2-1/4"
TJP-IP58-CTN Replacement Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 2" - 5/8" Pin Hole
Video of Replacement Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 2" - 5/8" Pin Hole
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Replacement Male Pipe etrailer, Ram Pipe Mount Swivel Jack - TJP-IP58-CTN
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a quick look at this Replacement Male Pipe for the etrailer and Ram Pipe Mount Swivel Jacks. This is designed to replace the male pipe on those etrailer or Ram pipe-mount swivel jacks. And let me pull out my ruler here and give you some overall measurements. The overall length of this pipe is gonna be right at 2 1/4 inches, and the distance from the center of the pin hole to the near edge, line up my ruler here, we're gonna be sitting right at 3/4 of an inch on that measurement.
Now, this pipe does have an outer diameter of two inches, and then that inner diameter is gonna be an inch and a half, and the pin hole diameter is going to be 5/8 of an inch. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Replacement Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 2" - 5/8" Pin Hole - TJP-IP58-CTN
Average Customer Rating: 4.9 out of 5 stars (26 Customer Reviews)
Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack. Pipe has an outer diameter of 2" and a pin hole diameter of 5/8".by: Gary 10/14/2023
This attachment pipe for the jacks works as planned. Multiple places on the flat bed trailer for mounting the trailer jacks.
by: Dunk02/01/2022
Designed jack mount to insert in front and rear receivers on tractor so tractors front and rear could be lifted by jack to place wheel dolly's under wheels or add tire chains. Male tube was welded to plate at end of 2"x 2" receiver insert.
by: Rusty guy09/16/2022
Wasted my money, I bought these because the trailer jack description indicated that they were not included So I spent an extra $XX to get 4 of them. With the cost of shipping it is not worth returning.
by: Jason08/13/2019
This product is just what I needed to finish modifying my camper. It is an off-road camper and needed a high lift capacity. I used them on all four corners do stabilization. etrailer had just what I needed at a great price along with great customer service and quick shipping.
by: William 09/09/2023
It was easy to order, and came a day ea rly.
by: Grandstrand08/26/2023
Good HD part, clean and easy to weld
by: C02/15/2023
No complaints, has been all what I hoped for.
by: Tim 02/09/2023
Order arrived correctly and quickly
by: Steve03/07/2022
etrailer always has what I need at a great price!!
by: Al H.08/22/2020
Great price on that one!
by: Richard 09/27/2019
The piece came, and was just like it was supposed to be!
by: Gary01/30/2019
Great product , Great service , Great price !!
by: Jayme12/19/2019
Can’t make one for the price. I’m sure you could, but I’d rather pay the 5 bucks and watch you drill out the pipe :-)
by: Adam 08/27/2018
perfect fit and fast shipping
by: George11/01/2023
by: Theresa07/19/2021
Great service
by: CJ08/24/2023
by: James 01/21/2024
by: Mark 03/24/2024
by: Nate 01/05/2022
by: Stephanie 08/23/2023
by: Joe 10/22/2022
by: Melissa 02/04/2023
by: Gerald 09/24/2022
25
26
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- Overall Length and Pin Hole Distance for Replacement Male Pipe for etrailer Ram Pipe Mount JacksThe overall length of the Replacement Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-IP58-CTN is 2-1/4 inches. The distance from the center of the pin hole to the near edge is then 3/4 of an inch.
view full answer...
- Parts Used To Create The Square Pipe Mount Swivel Jack With Footplate If you are looking for the parts needed to mount the jack # TJDP-7000S-B, the parts are already included in the packaging. To mount, place female pipe # TJP-FP58 in the proper location for trailer application. Weld on all the way around the female pivot pipe with 3/16" filet weld. Just in case you need it, I have the breakdown of the parts used to create the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B. You will need Replacement Drop Leg with Foot for etrailer and Ram Square,...
view full answer... - Male Pipe Dimensions for Installing Square Pipe Mount Swivel Jack on TrailerThe weld-on bracket that comes with the Square Pipe Mount Swivel Jack w Footplate # TJDP-5000S-FLB measures 2-1/4" long and has 1-1/2" inner and 2" outer diameters. I've attached a dimensional photo as well as some videos for you to check out. You can see the dimensions on the Replacement Male Pipe # TJP-IP58-CTN product page.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Manda E
Written by:
Amanda M
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/30/2022
The jack part # TJDP-5000S-FLB does not come with the pipe mount so I am not sure as to what may have happened. I will have our customer service team reach out to you.