Replacement Male Pipe for Curt Pipe Mount Swivel Jacks - 2"

Video Transcript for Review of CURT Replacement Male Pipe 2 Inch Outer Diameter - C96FV

Hi, everybody. Andy here with etrailer.com, and today we're gonna take a brief look at this CURT Replacement Male Pipe. This replaces the male pipe on your CURT Pipe Mont Swivel Jack, and this will weld to your trailer. And as you no doubt know, this male pipe pairs with the pipe on your jack, so you can swing your jack down for use, and up for travel. Now, let me go ahead and retrieve my ruler here, and give you some overall dimensions that should prove helpful for you. Beginning with the diameter.

The overall diameter, as you can see, we are sitting right at two inches on that, overall, or that outer diameter. And then looking at the inner diameter, we're sitting right at an inch and a half. And then, the pinhole diameter is sitting right at nine 16ths of an inch. The overall length, it's almost two inches. It's probably closer to about one in seven eight inches long, overall.

And then, measuring from the longer edge to the center of the pinhole. Let's see if I can line that up for you. We are sitting right at one in three 16ths inches. And then, measuring from the shorter edge, all the way to the center of the pinhole, we're sitting right at about 13 16ths of an inch. So, if you are needing to replace the male pipe on your CURT Pipe Mount Swivel Jack, this is going to be exactly what you need.

That's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.