Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 10-1/2" retracted height and measures 6-1/4" from mounting bracket to top, excluding handle.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to take a quick look at the Pro Series round pipe mount swivel jack part #: PS1401420303. Now Pro Series covers this jack with a limited one year warranty. It has a lift capacity of 5,000lbs. Were going to go over a few measurements real quick. Well measure from the top of our jack to the center of our mounting bracket and it comes in at about 6 inches. Were also going to measure from the center of our mounting bracket down to the base of the jack, that puts us at 10 inches.
Well take the same jack thats fully extended and take the same measurement. This time it comes out to 20 inches. The difference between those two measurement, 10 inches, is known as the jacks lift or travel. Its built with 2 inch diameter tubing, its a side wind style with a nice ergonomic handle to make easy to operate the jack. The outer tube is finished in black paint, the inner tube is zinc plated as well as the footplate thats welded onto the bottom.
This footplate is going to provide a nice flat base to support the nose of your trailer. On the back of the jack we can take a look at the mount setup. Youll take this steel piece and weld it to the frame of your trailer. The jack will slip over it and youll secure it with a pin. You can also remove the pin, rotate the jack and flay it up flat so that you can tow your trailer down the road without having to worry about your jack being damaged against the ground.
And thats it for our quick look at the Pro Series round pipe swivel mount jack part #: PS1401420303.
Average Customer Rating: 4.8 out of 5 stars (471 Customer Reviews)
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 10-1/2" retracted height and measures 6-1/4" from mounting bracket to top, excluding handle.These jacks are essential elements for moving and installing our interactive public art work "Ourself".
Each side of the piece has 3 jacks in it. The jacks are critical for the last step which we require precise and careful assembly. When in place we retract the jacks and the piece sits exactly where we want it.
Thank you for such a great product!
Cheers,
The jack is well built, heavy duty, and is exactly what I was looking for. I am using it for an accessory jack on the back of my car hauler trailer to facilitate heavier loads when loading and unloading. Great product.
The product is outstanding. However, I am going to have to return it. I need the same jack in a top crank version. I thought this side crank would work. The crank does not clear diagonal bracing on the trailer.
I intended to call Monday to see if I can exchange this for a top crank version.
Great value and high quality. I love the videos on the website. Shipping was fast and packaging was very good. If anyone is looking fir a high quality trailer jack - this is the place to go. I purchased 2 of these to go on my trailer to use as stabilizers on the very back of the trail when I load my tractor. They work great and install was easy!
Works great I mounted on my UHV trailer
Ordered/received 3 side crank trailer jacks to replace broken and top crank jacks. Farm for a living and still don't know why some implements come from the manufacture(s) with those PITA top crank jobs. Top cranks are harder to operate and usually interfear with the hitch, hydraulic hoses, electrical hookups and whatnots. Next order will be for longer SIDE wind jacks
No issues finding what I need and videos are very helpful if I have questions plus I know I can get questions answered
My utility trailer had a center-mounted jack which I never liked. It was always getting in the way when dropping the tailgate on my truck, or opening a back door on my van while the trailer was hooked up. It also had a horizontal crank which interfered with the trailer spare tire mounted on the front of the trailer. This jack solved all my problems plus looks great. This trailer jack is rated for more weight than I really need, but I tend to "over-engineer" things anyway. Very pleased.
great product
Perfect item to use of each side rear end of gooseneck trailer as stabilizers to load equipment. Excellent price!
This sidewind jack was just what I needed. Great quality and uber strong. My trailer has a taller jack with footplate. I wanted to add a caster to it but then that jack would have been too tall with the addition of the 6" wheel. So, I ordered this one, cut the footplate off, drilled a hole and bolted the caster on. Couldn't be happier! And yes, I know that it is no longer rated to 5000 lbs with my modification. It will never see more than 1000 lbs.
It's great you can take it off and on when you're pulling your trailer so it doesn't get salt water on it causing the gear to rust if water should get inside the housing.
I got three Pro Series jacks for a small generator trailer. I used one on the tongue and two for the rear as out riggers to stabilize the trailer while the generator is in use. The jacks seem to be good quality and what you would expect, great price and fast shipping.
Awesome product, delivered quickly and exactly as described. Could not be happier.
This was a great product it installed easily and a year later it is still working correctly no issues, but I didn't expect any issues because everything I've bought so far from etrailers has been long lasting and great products, but most of all etrailers has the best customer service and the most experience people making me want to go to them for all of my trailer needs. Thanks again very satisfied customer.
Great selection. Arrived very quickly standard delivery and just as advertised. I haven't welded it to my trailer yet, but it is a high quality jack. The videos available on this site make installation very straight-forward as well. Definitely a go to site for Trailer parts.
We have a LOT of swivel jacks on this farm, the one I got from you will contend with the best of them. Even with shipping charges it was half the cost of anything in town.
I received my jack quickly. Already have it welded on my trailer. Nice, smooth action. I like the fact that I can remove the jack if I want.
Great jack, fast service, reasonable price. The side crank jack is well made, all fittings are sturdy, the side crank is easier to operate than the top crank, and it is less susceptible to rain intrusion.
Excellent jacks for the price. Installed on rear end of car trailer to keep from lifting my van when loading. Worked great.
Perfect to my needs, this will fit my trailer perfectly and no more dragging on the concrete and bumps! I ordered the wrong size too and the return was super easy, as was ordering the new one. It took one day for it to arrive, not too surprised considering I live three hours away, but the point is there was an issue, and they took care of me. Fantastic service! TWO THUMBS UP!!
great product
I have a bandsaw mill that i have made portable. The jacks are mounted to the mill to make setup quick and easy.
excellent value
Nice looking ,Well built Jacks that look good on my trailer
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
10/23/2018
If you are looking for a top wind version of this jack I recommend Proseries pipe-mount trailer jack part # PS1401460303. Part # PS1401460303 is Pipe-Mount Swivel Top Wind Jack that includes the Footplate with a 10 inch lift. It can lift up to 5,000 lbs and should give you more clearance than a sidewind jack.
Helpful Links
Trailer-Jack/Pro-Series/PS1401460303.html