Linchpin Kit - 9/16" Diameter
(19 reviews)
Price: $9.63
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (19)
- Q & A (0)
- Videos (1)
- Photos
Bulldog Hitch Pins and Clips - BD500219
- Linchpin
- 9/16 Inch Diameter
- 2-9/32 Inch Long
- 2-9/32 Inch Span
- Bulldog
Features:
- Linchpin kit
- Diameter: 9/16"
- Overall pin length: 3-9/16"
- Useable pin length: 2-9/32"
- Replacement pin for PS1401600383 Pro Series Square Jack
500219 Bulldog Linchpin Kit
California residents: click here
Video of Linchpin Kit - 9/16" Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Hitch Pins and Clips - Linchpin - BD500219 Review
Today we are going to be taking a look at part number BD500219. This is the linchpin from Bulldog Hitch Accessories. Now, this particular pin is going to give us a diameter of 9/16ths of an inch. We take a measurement of the overall pin length. That's going to give us a measurement of 3-9/16ths of an inch. The amount of usable pin length that we have, which is measuring from the inside of this clip to where the clip mounts to the pin on this side, that's going to give us a measurement of about 2-3/8ths of an inch. Now, this is a replacement pin for part number PS1401600383.
That's going to be the Pro Series square jack. If we take a measurement the length of the pin from where that clip mounts to the end of the pin, that's going to give us a measurement of 3-1/8th of an inch, and then the amount of space that we have between the top of the pin and the bottom of that square tab, that's going to give us a measurement of 1-3/4 of an inch. Really simple use and operation. You can see here that once you have this through your particular application, or the pinhole of your particular application, all you got to do is bring this square tab down over the end of the pin, place it in that guide right there, and then just push the clip on until it snaps into place. That's going to do it for our review of part number BD500219. This is the Bulldog linchpin with a 9/16th inch diameter pin. .
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Customer Reviews
Linchpin Kit - 9/16" Diameter - BD500219
Average Customer Rating: 4.7 out of 5 stars (19 Customer Reviews)
by: Daniel04/12/2024
Used to replace OE snap pin on square dropleg. Perfect fit and no more worries about the poorly made snap pin that came with jack.
by: Michel 09/05/2023
fit perfectly, fast delivery
by: Jim P.10/16/2016
I purchased some of these last year to replace a different style pin that came with my utility trailer. Unfortunately these were just a bit too large to fit my trailer because they are over 1/2" in diameter, so I could never use them
by: Larry 01/12/2023
Always have what I'm looking for when no other places do. Super fast shipping also!!!
by: Steve11/14/2017
This pin was fine and worked perfectly, but the problem I had was that it could not stand up to weekly dips into saltwater. It rusted quickly, then got stuck in the trailer jack. I had to pound it out with a hammer.
This is the second one I've had that rusted out.
You might be better off getting a stainless steel clevis pin. That's what I did.
YMMV
by: Mark B10/04/2022
The shipping on the products was extremely fast it looks like everything is going to work great. The service on the phone was wonderful and very helpful in figuring out which axle I needed I will definitely use E Trailer in the future if I need any more parts.
by: Greg 06/25/2020
If you buy newer trailers and you get those jack leg pins with the chains, you'll want to switch to these instead. Awesome time saver these Buldog pins are. No more fighting with those circular clevis pins that get tangled in the little chain, every time it seems. Good product and price.
by: Frank F08/26/2022
9/16” pins are extremely hard to find. Reasonable price and reasonable shipping.
Thank You!
by: Tom 07/28/2020
The ordering process was easy and the item was delivered quickly. I’ve order from etrailer a couple of times and they are a good company with fair prices.
by: Robert08/28/2015
Great service and quick delivery. Everything I need in a parts company.
by: Geoff 09/11/2021
This did the trick. Exactly as advertis ed.
by: Laurence 09/24/2019
Just what I wanted. Great customer service and fast delivery!
Thanks.
by: Dennis 01/03/2022
Just what I wanted
by: Michael 10/21/2020
Quick response and shipping, Item as de scibed
by: Douglas 05/14/2024
by: Lloyd 05/01/2021
Quick fast service. Thanks
by: Kelly 12/27/2022
by: Mark 03/28/2021
by: Bennett 09/01/2021
by: Ian 07/13/2021
20
20
See what our Experts say about this Bulldog Hitch Pins and Clips
- Replacement Lynch Pin for a Fulton 2500 JackIt looks like you need the part # BD500219. This lynch pin is 3-9/16" overall and has a diameter of .563. Check out the review video I attached as well.
view full answer...
Info for this part was:
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim P.
10/17/2017
The pins remain in my “inventory” since they were slightly too large in diameter to fit my trailer. I’ve been using some much smaller pins that serve the purpose ok. If those pins had been a millimeter or two smaller, they would have been perfect.