Replaces the 3/8" diameter cage pin for Stromberg Carlson electric A-frame tongue jack with 18" lift and 2,500 lbs capacity (JET-2500). Used to attach replacement foot pad (2500-25 - sold separately) to jack.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Right here is a very, very useful little pin. So this is from Stromberg Carlson, it's for one of their jacks, but you can use it in a lot of different other instances. So right now we have a Bulldog Trailer Jack, and it's the perfect size to add a little foot plate onto it. Whether it's a wheel foot plate it does have a 3/8 inch diameter. So it'll fit through and the overall length of it, once we get it on there, the overall length from this side to this side's gonna be about three inches, but if you take off the big part right here, it's gonna be about two and three quarters of an inch. So it's perfect for our little wheel here for our Jack.
And it fits around the two inch diameter tube that we have. So from, let's go like this. So from the center of this to the end, it's gonna be about one and three quarters of an inch. So that's gonna be useful whenever you maybe have something that's a little bit thicker. You wanna make sure that this is gonna be able to wrap around it.
And we already went over the diameter of it. I can show you another thing that it would work with. It's not something that works with this trailer Jack, it's just a little foot plate. So if we had the electric Jack that this goes to it would work with this as well. I do like how it's really, really close and you really have to move it to get it up there.
'Cause then you're just confident that it's not gonna come loose. But one thing that it's not gonna work with, if you you look down at the coupler on our trailer. So the pin that we use is like this, it's a little bit thinner. This one's a little too thick for our coupler. So no, it has a lot of different uses but for this coupler specifically, it isn't gonna work.
So definitely take a look at how thick, and how long you need this, but also the hole that you're putting it into. So 3/8 is gonna be what this is and that's what it's gonna work with. So there's a couple examples. There's really not a whole lot to this. I'm not just gonna beat you with a bunch of features. It's made of steel, so it's gonna be extra strong. So if you have an application for this, or the one that you have ran away, we have one for ya on our website. That's pretty much it for our look at the 3/8 diameter pin, for your Stromberg Carlson Jacks, and much more..
Average Customer Rating: 5.0 out of 5 stars (11 Customer Reviews)
Replaces the 3/8" diameter cage pin for Stromberg Carlson electric A-frame tongue jack with 18" lift and 2,500 lbs capacity (JET-2500). Used to attach replacement foot pad (2500-25 - sold separately) to jack.Works great
Both sets of wheel chocks work as advertised. They have greatly reduced the amount of fore and aft travel, even with out the stabilizers down. So with them down the trailer should be rock solid.
We have yet to install the landing leg foot. But I'm pretty sure it's going to do exactly what its supposed to also.
Worked like a charm! Did exactly what I needed. Order was shipped fast and correctly. Thank you!
VErey good, strong spring, to keep it in place.
Works as advertised. Item was received in a timely manner.
Great service, fast shipping, great qua lity
Right part delivered promptly
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.