Recommendations For Repairing Or Replacing An Older Stallion Jack
Question:
Hello, I have an older square tube Stallion jack on a horse trailer, are there any electric motor conversions available for the Stallion brand jacks or possibly a universal kit? What information would I need from the jack to determine fit square tube dimensions, shaft diameter ? Thanks
asked by: James H
Expert Reply:
I may have a different solution for you, but there will not be a universal kit to add a motor to your Stallion jack, unfortunately. With that being said, I have 2 options below for you to check out. Both will be weld on applications, but are definitely worth looking at.
First is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This will have 38 inches of lift and is rated to a combined weight of 12,000 pounds. One of the big pluses with this unit is that the jacks are independent from each other, so you can really get everything level and stable. However, it is not inexpensive.
The Stromberg Carlson Electric Landing Gear Set # LG-1 on the other hand, has a much better price tag. This is rated lower though, and will handle 5,500 pounds and has 34-7/8 inches of lift. The two legs will also be attached to each other, so there isn't quite as much versatility.
If I'm completely off the mark with both of these, you may also want to look at the Bulldog Square Jack # BD182701 and the Powered-Drive Kit # BD1824200100. This is a square jack with 12,000 pounds of capacity and the powered-drive kit will convert it over to an electric jack. This may be the best option out of the three.
Products Referenced in This Question
Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Powered-Drive Kit
- Bulldog
more information >
Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 12,500 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Fifth Wheel Trailer
- Gooseneck Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 10001 lbs or More
- Sidewind Jack
- 26 Inch Lift
- Weld-On
- With Rectangle Foot
- Bulldog
more information >
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 5001 - 6000 lbs
- Electric Jack
- Landing Gear
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- Landing Gear
- 38 Inch Lift
- Weld-On
- 2 Jacks
- Ultra-Fab Products
more information >
Product Page this Question was Asked From
Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Hardware
- Rod
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K
- Q&A: Recommended Trailer Jack Replacement for Stallion Brand
- Shop: Square 2-Speed Jack w/ Crank - Drop Leg w/ Spring Return - Sidewind - 25-7/8" Lift - 10K
- Shop: Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear
- Shop: Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs
- Shop: Replacement Bearing for etrailer and Ram Square Jacks - 10,000 lbs
- Shop: Replacement Bearing for etrailer and Ram Round, Topwind Jacks - 2,000 lbs and 5,000 lbs
- Q&A: Repair Parts and Replacement Jack for 2000 Sundowner 2-Horse Gooseneck Trailer
- Shop: Peterson Clearance and Side Marker Trailer Light - 2 Bulbs - Oblong - Amber Lens
- Q&A: Are Bulldog and Stallion Jack Replacement Parts Interchangeable
- Search Results: lc146060
- Q&A: Replacement Tail Light For Model 421r Sealed Bulbs
- Video: Review of Lippert Components - Trailer Jack,Camper Jack - LC146059
- Video: Review of Lippert Components Power Landing Gear Repair Kit - LC146060
- Q&A: Schematic Diagram for Stromberg Carlson Lead Jack Repair Kit LG-146059
- Q&A: Locating Replacement Landing Gear Follow Leg for Keystone Raptor
- Q&A: Which Washer of the Repair Kit # LG-146059 is the Thrust Washer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Video: Titan Trailer Brakes T2385200 Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 68149
- Article: Trailer Tire Sizing
- Shop: Fifth Wheel Hitch
- Video: Choosing the Right Trailer Wiring
- Shop: Gooseneck Hitch