Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement manual crank handle comes in handy in case of lost power at your campsite or a mechanism failure. Use the crank handle to manually raise and lower fifth-wheel landing gear.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there camper owners. Today we're gonna be taking a look, at Lippert's Manual Crank Handle for their landing gear systems, or for their powered stabilizer jacks. This manual crank, will come really in handy if you had a power loss on your trailer while your landing gear or your stabilizer jacks are down. For an example, let's say you're at your camp site and you've set everything up, and then all of a sudden you're have a short and the cells go bad on your battery and you no longer have enough juice to draw 'em back up. Well, now your trailer stuck there at the campsite, and what are you going to do You need a way to be able to retract your landing gear and this handle here will slide directly in it, whether it's your landing gear or your stabilizer jack, and you can retract those manually, see we can bring up our stabilizers or if it was our landing gear, maybe we need to pull our truck under it and then we can lower it down and hook up our fifth wheel or our gooseneck. Additionally, if maybe you get to your campsite and you find oh no we've left our accessories on, and we had too many accessories on.
Then it exceeded what our charger from our truck was when we we're pulling our camper there and our batteries are now dead, and we're having an issue getting our jacks down, well we can grab our handle and we can go ahead and take care of that manually as well. And I kinda liked this because you can use the power option, and maybe you're like, ah you know, I wanna go a little bit, put a little bit extra on it from what the motor put on there. You can stick your handle in here and just give that little bit extra snug if you think you need it. And if we look at the end here, it's designed to work with the manual retraction attachment on either your stabilizer jack or your landing gear, and you can see it's just got a slit in there that lines up with the prongs and it's pretty deep here, this shaft. So you might try and use some pliers or something else, and you're really gonna have a hard time finding something that's gonna fit on there.
This slides on there very easily and gives us plenty of leverage. The center portion here has a nice grip on it that rotates so we can grab it by there to stabilize it. And we've got similar handle here on the other side, and you can see, we can easily hold everything and crank it, and we can really get some speed going, 'cause everything moves very easily. And you can do the same in either direction. You'll also notice that the length of our arm here is plenty long to attach into the stabilizer jack or your landing gear and give us plenty of distance outside of our trailer.
So that way we're not bumping our arms and cutting ourselves up on sharp edges underneath and things like that. And so you might be thinking, hey that was sticking out pretty far is this going to be a pain to store It's about 29 inches in length and should store in your under storage compartments fairly easily. That can tuck back up nicely and there's still tons of room in there for plenty of gear so, it's almost unnoticeable, in the amount of space that it takes up. And that completes our look at Lippert's Manual Crank Handle for their landing gear or powered stabilizer jacks..
Average Customer Rating: 4.9 out of 5 stars (56 Customer Reviews)
Replacement manual crank handle comes in handy in case of lost power at your campsite or a mechanism failure. Use the crank handle to manually raise and lower fifth-wheel landing gear.My electronic stabilizer jacks front and rear failed to operate while in the down position and I needed the hand crank that slotted to fit this Jack. The staff was very attentive to my concerns and I received my crank within 2 days....I'm a very Happy camper!!!
When I took our Class C to etrailer, they used their ingenuity and installed my spare tire carrier in a way that I could raise and lower it from the back of the unit instead of having to crawl under it. That was incredibly ingenious and I was totally thrilled!!! Great job etrailer!!!
Wow! this handle looks like it will do the job, thanks!
It was so easy to shop at a trailer and such quick delivery and great customer service in keeping us informed. I recommend them highly.
the jack crank fits my atwood power jack since atwood discontinued the handle. needed this crank to go camping
Good quality piece. Purchased to fit Lippert Components Camper Jack - LC363284 to add more pressure after the motor stops. It fits these well and does what I want, however the crank I received doesn't match the picture in the description. (there's only one plastic piece on the end, not a second one on the main shaft).
Dave
6/27/2017
Good quality works well.
This tool works perfectly for my rv's Lippert electric stabilizers (PSX1) which have a manual overide that is a 1/2" diameter pinned shaft. I hope I never need it but if I don't have one I will most assuredly need one. Should have came with the rv but....they just seem to pass those savings right on along. Get this if you don't have one!
John
6/1/2021
Luckily havent needed to use it but really glad that I have it!
The quality was greater than expected. Much better than the original that came with camper. Price and delivery were exceptional
Works perfectly. Thank you.
As usual the purchase arrived as scheduled and was as ordered. I have purchased from etrailer on previous needs and have been impressed with the service and quality products. I would definitely recommend them for your trailer parts/etc needs. Thank you to the etrailer team.
Joseph R.
7/18/2020
Perfectly
I have a balky electric motor on my Lippert113407 stabilizer jack and I wanted this item in my tool collection just in case the motor gives up the ghost on a trip. The tool fits perfectly into the end of the auger shaft and appears to be very well made.
Gave one star for delivery or the lack of. Not sure where the package is, not at my address.
Katrina B.
4/21/2023
I would recommend contacting your neighbors to see if they got it in your place.
excellent quality, but wrong size , 1/2", for my camper scissors jack which needs a
5/8" I. Dia wrench. The I.Dia. should be listed in the description.
Mike L.
10/15/2018
This particular Manual Crank handle is designed for a Lippert Components Fifth Wheel Landing Gear, its not designed for a scissor jack. If you could let us know the manufacturer of your jack, wed be happy to look into locating the proper crank for you.
The Lippert crank handle was as expected when received and of good quality. Customer service was top notch and my part was received in a short time frame. I will continue to shop etrailer for my RV needs.
The landing gear on my toy hauler has caused some trouble, mostly blowing fuses, so I think the drive motor is bad. I bought this crank and will cut the handle off and weld on a large nut. Then I will use the handle with a heavy duty electric impact wrench to turn the landing gear up and down. It should be an easy fix and much cheaper that replacing all the gear.
It worked at lowering my rear stabilizer bars.
I didn't know if I had a Lippert system or not - still don't, actually.
Suggestion: maybe to add to the video or at least the write up - the inner & outer diameter of the "business"end of this thing so if we don't know what brand our application would be for, we could at least measure and see if it would apply.
But, it gets 5 stars because it worked for me!
Awesome sauce
We replaced our manual crank handle for our jacks. It looks and works like the factory original. etrailer is a good source.
Not my first order with etrailer. Great company to deal with; good prices and a wide selection of products for trailers, hauling, RV's, etc. This order was for this crank handle and some parts to fix the stabilizers on my RV. Ordered on Monday and received the package on Wednesday.
Replacement for my camper, the TAXA dealer did not supply one. Thanks!
Works great. Can also use for spare tire lowering device.
I was expecting the crank to come on a Monday best case. I couldn't move the unit. I received it on a Friday by 10:00AM which enabled me to meet my deadline on moving our trailer out of the storage unit it was in . I feel Wayne understood my need and reacted accordingly saved us a big charge
Great product! Only wish my RV actually came with one. Solid construction and easy to use. E trailer is great. Awesome instructional videos as well. I have purchased several items from them. Keep up the good work!
Works as intended when tested. Fortunately I have not had to use this backup crank yet, but feel confident that I will not be stranded if my battery or crank motor ever fail.
Quality product and easy installation.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William M.
8/10/2019
I traded up to a 2019 Grand Design which came with 4 manual scissors stabiluzers..Very happy with it.