Bulldog Winch Receiver Mount Kit - 2" x 2"
(71 reviews)
Price: $95.09
In Stock
Bulldog Winch Receiver Mount Kit - 2" x 2"
Retail:$128.71
Our Price: $95.09
You Save: 26%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
26% prefer this
4% prefer this
- All Info
- Reviews (71)
- Q & A (0)
- Videos (1)
- Photos
Bulldog Winch Accessories and Parts
- Electric Winch
- Mounting Hardware
- Plates
- Bulldog Winch
- With Handle
- 2" x 2" Receiver mount fits your budget with bolt-together design
- Adjustable handle positions
- Used for truck winches up to 12K with 10 x 4.5" mounting bolt patterns
- Will not fit large body truck winches or Alpha Series
- Capacity is based on capacity of vehicle receiver
20155 Bulldog Winch Receiver Mount Kit - 2" x 2"
Item # BDW20155
California residents: click here
Video of Bulldog Winch Receiver Mount Kit - 2" x 2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Winch Electric Winch BDW20155 Review
Speaker 1: Today, we're gonna take a look at the Bulldog winch hitch receiver mounting plate for 2" hitches. Now this will offer a portable mounting option for your winch. Your winch will basically mount onto this mounting plater, has the adjustable handle positions right here, make it very easy to transport your winch from different vehicles. It is designed to fit into any standard 2" by 2" hitch receiver. They do even include the hitch pin and clip to install it into your hitch receiver. Now this is used for truck winches up to 12,000 pound capacity that uses a standard 10 and 4 1/2" mounting bolt pattern.
You can see the bolt pattern they have on the mounting plate. Now one last note. The capacity on this is based on the capacity of your vehicle receiver and this also will not fit large body truck winches because those winches are too heavy for portable use, too large to fit onto this plate and it will not fit the alpha series because the frames on the alpha winches are too large to fit into this mount.You can see they do have the three different holes at the bottom so you can put the bolt through there just to adjust whatever position you need these handles in. But again, you just have your winch mounted on here. You can grab it by the handle, slide it into the hitch receiver and then when you're done, you can just pull it right out.
But that should do it for the review on the Bulldog winch hitch receiver mounting plate for 2" hitches.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Defective
- Wrong item was ordered
Customer Reviews
Bulldog Winch Receiver Mount Kit - 2" x 2" - BDW20155
Average Customer Rating: 4.8 out of 5 stars (71 Customer Reviews)
by: John04/17/2024
I'm off to overland in Texas and wanted you to know that the hitch and winch carrier are perfect. Using quick connectors, I can use ir on the front and rear.
Removing it also saves on gas.
It works great with a moulded number, saving on buying a specialized steel bumper and other expensive attachments.
I like that I can still have all the internal mud guards and brush cover without having to take them off and not be able to have them on.
Awesome!
by: Wade03/30/2022
The overall build and construction of the mount is actually quite good, I have no complaints there. It seems to be made well and is as advertised. Unfortunately, however, that’s the only good news: not only did the package arrive almost completely destroyed but because of this several pieces of hardware were missing. Still, I was willing to overlook this as it could’ve been partially the fault of FedEx/ UPS. The reason that I am only giving it 1 star is because, contrary to the answer given in the Q&A, this mount DOES NOT fit my Warn Zeon 12-S winch. The reply when asked about fitment was “Yes, the Bulldog Winch Receiver Mount Kit part # BDW20155 will work with the Warn Zeon 12-S Platinum Winch 95960 as they both use the same industry standard 10" long x 4-1/2" wide mounting pattern.” As long as you are willing to do without the handles this answer is true. Misleading, but true. It may be worth noting that as long as you have a winch that is smaller in overall size than the Warn Zeon 12-S, it should work just fine.
by: David B 03/20/2019
Product arrived on time packaged well no damages because of my setup I have to get a extension to clear my current brush guard however was all put together when came out of the box but 4 bolts for the handles super easy to use holds my smittybilt 12k winch perfectly and fits nice in the receiver without a lot of wiggle very good product
Mike L.
3/21/2019
Keep in mind that using an extension will lower the capacity of the hitch to a degree, because of the extra leverage exerted especially if the winch is pulling at an angle. If the extension were to break under load, it could lead to injury.
by: Trevor01/06/2022
I picked this winch from etrailer as it provided an incredible value at the time of purchase vs other option here and from other retailers. It ended up being way overkill for what I use it for, but I never have to worry about overloading it either. Went together well and mounted up like it should to the Bulldog receiver mount I got too (hitch plate welded/mounted on car hauler, winch is removable and not subject to road grim ever). Plan on years of service from this combination!
by: William10/02/2018
Quick service…. looks sturdy, maybe a little iffy for 12,000 pound winch. A snatch block will fix that load issue. The paint is already peeling on the corners. I previously ordered a Curtis Front tire carrier, different vender , however it will NOT fit a Dually TIRE. so planning on placing a spare tire on the platform and securing with ratchet straps.
by: Thomas11/17/2018
Good concept, but extremely flimsy, as it relies only on the hitch receiver for stability. It definitely needs some additional parts to keep it from wiggling, bending and rocking when the winch (SmittyBuilt) is in use. I doubt that it could even pull my little Ridgeline out of a ditch without deforming or ripping apart, but I'm afraid to test it.
by: Wade 07/21/2023
Fast delivery! Looks Great!
by: Gino05/24/2021
Came as described, packaging was beat up pretty bad but nothing wrong with the plate. Holds my Badlands winch no problem, this is a better solution to needing a winch other than spending [money] on a front bumper with a winch mount.
by: Tmc05/23/2019
This fit my Badland 12k winch very well, it's very heavy duty and I don't worry about the ability to handle what I throw at it, not to forget the price was very reasonable thanks etrailer.
by: Lance 11/05/2021
As usual, another great experience with etrailer. Shipped super quick. Love the handles, which are a must-have if you will be hitch mounting and dismounting a heavy portable winch a lot. Handles are also adjustable so allow for a lot of different winch sizes.
by: Deborah 10/22/2022
Nice and strong. Just a bit too tight for our warn 8000 winch. Tight squeeze, but made it work aok!
by: Bob 01/28/2021
The Bulldog Winch Receiver is a must-have. Fit my needs perfectly. Easy to use and makes using the Bulldog winch that much easier.
by: Carl05/31/2020
Easy setup for my winch and it makes it easy to get mounted to my trailer hitch. A great product if you want to have a winch but don’t want a permanent mount.
by: Jack10/13/2017
This cradle is light and compact and looks pretty sturdy. Since tow receivers are only rated for 5000# and my winch is rated for 9000#, I will run my winch cable through a snatch block and back to a hook on my tow receiver.
by: Rick03/23/2020
Well Built. Much more substantial handles compared to the bent tubing on others. Love how the handles are adjustable to fit the winch. Easy to use.
by: Gary 05/18/2020
Very well made! Strong and stout, Don get the cheep one fellas, you or someone else may be depending on it. Haven't gotten my winch yet but when I do I will post pictures.
As always, a great experience working with and purchasing from etrailer!
by: butch04/30/2017
very happy with the winch and mount, instructions were easily understood and the finished product was all it was said to be. will continue to deal with this business as they are professionals.
by: Jimmy04/14/2019
Working great with my 12000lb winch. thanks. works with my truck and car hauler
by: vic06/25/2018
Not too impressed. It seems pretty lightweight for a winch carrier. In all fairness I have not used it yet but that is my first impression
by: Bill 12/20/2020
Winch receiver mount is well made and works great with the Badland Apex winch.
by: Tim L.06/18/2016
Totally pleased with mount.
Much better quality than I thought I would get for the price !!
Putting a 12,000 lbs winch on it, not worried about the mount at all.
Once again etrailer delivers !!!
by: William07/22/2019
Not much to say. Pretty simple idea. Bolt pattern lines up with a warn winch good. Fairly sturdy.
by: Rick12/26/2018
Well Built, Real Decent Quality, And Easy Installation. A #1.
by: Terry06/02/2018
great price, fast shipping. exactly as described. have purchased many items from etrailer and always satisfied.
25
71
Show More Reviews
See what our Experts say about this Bulldog Winch Accessories and Parts
- Mounting Options for Bulldog Winch on 2018 Ford F-150To mount the Bulldog Winch # BDW10041 to your 2018 Ford F-150 I recommend using the Westin MAX Winch Mounting Tray # 46-23835. This is a custom rust-resistant steel tray that will bolt to your truck's frame to accommodate the Bulldog Winch with pre-drilled mounting holes. All of the hardware is included. I have attached the written installation instructions that you can also check out. Another, less permanent solution is with the Bulldog Winch Receiver Mount Kit # BDW20155 that will...
view full answer... - Front Hitch and Winch Plate for 2017 Ford F-250 for Mounting Winch at Front of TruckYour biggest issue is going to be that the grille guards and the front hitches occupy the same area and use the same install points on the frame of the vehicle so there's no easy way (if at all) to install both at the same time. If you aren't super attached to the grille guard idea I'd go with just a front hitch so you could use a removable winch plate like the # BDW20155 at both the front and the rear of the vehicle. The Curt Front Mount Trailer Hitch # C31078 that you referenced is...
view full answer... - Front Hitch and Mount Recommendation for 2016 Ford F-450For a front hitch confirmed as a fit for your 2016 Ford F-450 we have the Draw Tite part # 65049 which will work great as a way to mount your front hitch. Once installed the winch mount part # BDW20155 that you referenced would fit and work well to carry a Bulldog Winch like the 12k Standard Series # BDW10043.
view full answer... - Warn Zeon 8 Winch Confirmed Fit with Bulldog Winch Receiver Mount KitThe Bulldog Winch Receiver Mount Kit - 2" x 2" # BDW20155 is a fit for any winch up to 12K with 10 x 4.5 inch mounting bolt patterns. I was able to find the Warn Zeon 8 online and it does have this same mounting pattern so it is confirmed to fit the Bulldog mount.
view full answer... - Is There a Ball Mount With an Accessory ReceiverA multipurpose ball mount is what you're looking for, and we have just that with the Multipurpose Ball Mount with 2" Receiver # D210. This ball mount fits in 2" hitches and has a 2-1/4" drop with a towing capacity of 7,500 lbs and tongue weight capacity of 750 lbs. The 2" receiver on top is for accessories only so it could work with something like Winch Mounting Plate # BDW20155. The ball mount requires a hitch ball with a 1" diameter shank, such as the 2" # 63845 or 1-7/8" # 19260.
view full answer... - Winch Mount Compatible with Kubota RTV900 with 5000 lb WinchThe Bulldog Winch Receiver Mount Kit - 2" x 2" # BDW20155 is a fit for any 2 inch receiver, so if you have a 2 inch receiver on your Kubota that can handle the line pull of your winch, you will be fine. We also have a custom Kubota RTV mount for your RTV900. You may be interested in the Bulldog Winch Custom-Fit Steel Winch Mount # BDW15172.
view full answer... - Can an Electric Winch be Used on a 1987 Kawasaki KLF 300 Bayou 2x4There is not a custom winch mount for your model ATV, however if you have a 2 inch trailer hitch receiver like # C45006, you could use a Winch Receiver Mount like # BDW20155. With a mount combination like this, you could absolutely use an electric winch. My recommendation is the Bulldog Winch Powersports Series ATV Winch # BDW15014 which will work very well for your application and give you easy to use controls at your handlebars. I've attached a video to assist and you can see the prices...
view full answer... - Recommended Electric Winch and Front Mounted Trailer Hitch for 2015 Chevy Silverado 2500HDThe Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65078 is a confirmed fit for your 2015 Chevy Silverado 2500. This hitch is rated for 9000 lbs line pull as you stated and a trailer weight of 5,000 lbs. If you were to use an electric winch like the Bulldog Winch Trailer Winch - Wireless Remote - Wire Rope - Roller Fairlead - 12,000 lbs # BDW10039, then the maximum line pull is 12,000 lbs for a static load or 120,000 lbs for a rolling load. That is the maximum pull...
view full answer... - Parts Needed to Install 9,000 lbs Winch on the Front of a 2008 Jeep Liberty Aside from using the Curt Front Mount Trailer Hitch Receiver # C31020 to mount a winch on your 2008 Jeep Liberty there are a few other things that you will need to use Once the front trailer hitch is installed you can then use the Bulldog Winch Receiver Mount Kit # BDW20155 to carry the Bulldog DC9.0 Integrated Off-Road Winch # BD500600 which is rated for 9,000 lbs and is compatible with the mounting bracket kit. This winch comes with a remote control so that you can monitor the your...
view full answer... - Is it Okay to Use Winch with More Capacity than Front Hitch of Vehicle for RecoveryIf you were to be in a situation that would put all of the winches strength to use (which would be unlikely) it would end up damaging either your vehicle or the hitch. Now the likelihood of you being in a situation where you would be pulling 10k worth of force-and your Wrangler not moving to offset it would be pretty unlikely. The line pull of the part # 65069 is 9k which is pretty close to the capacity of a 10k winch and the winch mount part # BDW20155.
view full answer... - Can Bulldog Winch Hitch Mount Fit Front and Rear Hitch of 2009 Chevy Silverado 2500HDThe hitch mounted winch mount from Bulldog Winches part # BDW20155 would allow you to mount a winch at either the front or the rear of a truck like your 2009 Chevy Silverado 2500HD. For a front of vehicle wiring kit that has 2 gauge wire you'd want the part # BDW20205 and then for a rear vehicle kit you'd want the part # BDW20207.
view full answer... - Hitch Mount for Front Hitch to Use with Winch Powerplant and CompressorWhile we don't carry the Winch Powerplant that has the air compressor built in we do know that it is designed to fit on standard winch mounts so the Bulldog Winch Receiver Mount Kit # BDW20155 that you referenced would fit and work great. The handles of it also make it really easy to install and remove from the hitch too. I attached a review video for this for you to check out as well.
view full answer... - Removable Winch For 2007 Chevrolet Suburban OverlanderThe only option you have for the front of your 2007 Suburban is like this Curt front hitch # C31012. Since you have a custom built front bumper, you may want to get something like this universal weld on hitch # C47CR. This will have 16,000 GTW so it should be plenty strong. If you can make that work, you will be able to get the set up you're wanting. You could then get this Bulldog Winch Receiver Mount Kit # BDW20155 with this 12K Winch # BDW10043. We have a bunch of weld on hitches,...
view full answer... - Recovery Winch to Pull 2019 Nissan Frontier Pro4x I have a solution for your, but it looks like your 2019 Nissan Frontier Pro4x has a weight between 4,414 and 4,567 lbs and the ComeUp Off-Road Winch # CU854768 is only recommended for recovery use on vehicles with a GVWR of up to 4000-lbs. I would instead recommend using something like the Bulldog # BDW10044 which is recommended for recovery use with vehicles up to 5333-lbs GVWR. Since this winch does not come with a mounting plate, you'll want to use the Bulldog Winch Receiver Mounting...
view full answer... - Comparing Curt and Draw-Tite Front Mount Hitch Receivers For a Winch on a 2015 Ford F-150 XLTThe Curt Front Mount Trailer Hitch Receiver # C31083 and Draw-Tite Front Mount Trailer Hitch Receiver # 65067 are currently the only 2 front mount receivers that are custom fit for your 2015 Ford F-150 XLT. Both receiver have the same 9,000lb line pull rating for using your winch and both will support a tongue weight of up to 500lbs which will allow you to use it for other things during the summer. Visually both receivers appear the same and have very similar construction. If you plan...
view full answer... - Winch Mount and D-Ring Recommendation for 4400 lb Capacity Other than receiver hitch mounts like # BDW20155 or model specific mounts for ATV's and UTV's, we don't really offer a 'universal' mount. I've seen folks use a receiver mount in conjunction with something like the # E-11 welded to a car trailer to provide a stable quick-disconnect mount, if that's what you have in mind for your Bulldog # BDW15020 winch. If you decide to do something along those lines, it's best to have a professional to handle that type of fabrication work, to ensure that...
view full answer... - Front Winch Mount Options for 2004 Toyota 4RunnerI have a couple solutions that may work for you, since, like you pointed out, there are no custom fit front mount hitches, winch mounts or bumpers for your 2004 Toyota 4Runner. One option is to use the Bulldog Winch Universal Winch Mounting Plate, # BDW20008. You will need to find a sturdy location on your 4Runner and drill mounting holes to bolt the plate. You also have the option to weld it in place for a permanent installation. The # BDW20008 is designed to fit the a 10 x 4-1/2 mounting...
view full answer... - Draw-Tite Front Mount Receiver Hitch and Winch Mount for a 2010 Chevy Silverado 1500The front mount Draw-Tite hitch that fits your 2010 Chevy Silverado 1500 is # 65052. For a winch mount take a look at the # BDW20155 or the # BDW20011 from Bulldog Winch, and # C31010 from Curt. Current pricing is available on the product pages and you can see shipping options after adding them to the cart.
view full answer... - Recommended Hitch Receiver Mount For Superwinch UT3000The receiver mount compatible with your Superwinch UT3000 is the Bulldog Winch Receiver # BDW20155 with handles for ease of installation or # BDW20061R2 without the handles. I can easily recommend either option so it all depends on your personal preference for appearance and function. I've attached a couple videos to assist you in your decision.
view full answer... - Can Front Receiver be Installed on 2015 Jeep Wrangler Unlimited w/Base Plates Already InstalledThe base plates and front mount hitches (which you would use to mount a winch) install at the same places on the frame of the 2015 Jeep Wrangler Unlimited so you cannot have both at the same time. I recommend putting a winch at the back of the Jeep. For a 2 inch trailer hitch you can use the Bulldog Winch receiver mount # BDW20155 . Then you can attach a Superwinch electric winch. I have linked the Superwinch models for you.
view full answer... - Measurement of Curt Front Hitch 31026 for Ford F-150 to Determine Winch Mount CompatibilityCurt front-mount hitch # 31026 is a confirmed fit on your 1992 Ford F-150 and to help you confirm the right clearance for your application with a winch mount I went to our warehouse and measured one key dimension that will help you determine this. Please refer to the linked photo. I measured from the front mounting holes on the hitch mounting brackets to the hitch pin hole in the receiver tube and found that the hole center to hole center distance was 4-1/4-inches. So, if you check the...
view full answer...
- Availability of Front Receiver for 2017 Jeep Wrangler that Attaches to Outside of Frame RailsUnfortunately, the front receivers offered for the 2017 Wrangler JK fit to the inside of the frame rails, we don't offer one that installs in any other manner. One option that would allow you to use both the winch and the front mounted receiver would be to use a receiver winch mount like # BDW20155. If you went this route, you could temporarily disconnect the winch when the receiver is needed for other purposes by using a quick disconnect on the wiring. I've linked to the quick disconnects...
view full answer... - Front Mount Hitch Recommendation for Adding Winch to 2021 Toyota TacomaI recommend going with the Curt Front Mount Trailer Hitch Receiver # C31075 for your 2021 Toyota Tacoma because it will be easier to install and has the same line pull rating as the Draw-Tite # 65070. The only reason I would recommend the Draw-Tite over the Curt is if you are going to be pushing that 350 lb vertical load limit, but even then you'll need to ensure that your truck has that high of a weight rating in the front. I've attached a photo of the Curt hitch installed on a Tacoma...
view full answer...
- Pin Hole to Weld Dimension of Bulldog Winch Mount Kit # BDW20155We went and pulled a Bulldog Winch Receiver Mount Kit # BDW20155 from our warehouse to measure distance from center of pin hole to nearest weld edge and found it to be 6-1/4 inches.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Tyler C
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lisa S
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
4/7/2022
I will have our Customer Service team reach out to you. I have reached out to the manufacturer and confirmed that this mounting plate does prevent clearance for the handles on the Zeon winch. There is another winch plate that would work as it is designed for oversize frame winches up to 12k. It is part # BDW20011.