Bulldog Winch ATV Winch Mounting Plate for 2" Hitches - 2,000 to 6,000 lbs
(14 reviews)
Price: $91.99
In Stock
Bulldog Winch ATV Winch Mounting Plate for 2" Hitches - 2,000 to 6,000 lbs
Item # BDW20061R2
Retail:$124.56
Our Price: $91.99
You Save: 26%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (14)
- Q & A (0)
- Videos (1)
- Photos
Bulldog Winch Accessories and Parts - BDW20061R2
- Electric Winch
- Mounting Hardware
- Plates
- Bulldog Winch
- Without Handle
- 2" x 2" Hitch receiver mount for 2,000 lb - 6,000 lbs Powersports Series winches
- Offers portable mounting option
- Includes 2 anchor points for 5/8" shackles (BDW2006 - sold separately)
- Mounting channel for fairlead included with most Bulldog Winch winches or sold separately (BDW20007)
20061R2 Bulldog Winch 2" x 2" Receiver Mount for ATV Winches - 2,000 - 6,000 lbs
Replaces 20061
California residents: click here
Video of Bulldog Winch ATV Winch Mounting Plate for 2" Hitches - 2,000 to 6,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Winch Electric Winch BDW20061R2 Review
Speaker 1: Today we're going to take a look the Bulldog Winch Hitch Receiver Mounting Plate for 2" Hitches. Now this is a 2" by 2" hitch receiver mount for 2000 pound to 6000 pound ATV and utility winches. This offers a nice portable mounting option, just mount your winch right here and then this will slide into the 2" by 2" hitch receiver opening. You notice right here on the edges, they do include two anchor points for 5/8" shackles, we do sell those separately.Now you will use the mounting channel, it's included with your winch to mount the fairlead with the winch. Or, you can order the correct mounting channel separately for non Bulldog Winches. This does also provide the mounting for a contact or a power unit, right back here you can mount that, and it does include the mounting hardware for that.A few dimensions on this, the overall width, it's going to be right at 11" wide.
Total depth is right at 6" deep and the shank itself from the back to the back of the mount, it's right at 5-1/2". But that should do it for the review on the Bulldog Winch Hitch Receiver Mounting Plate for 2" Hitches.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Bulldog Winch ATV Winch Mounting Plate for 2" Hitches - 2,000 to 6,000 lbs - BDW20061R2
Average Customer Rating: 5.0 out of 5 stars (14 Customer Reviews)
by: Donald 02/14/2024
Have not used it yet but know it will do the job
by: Robert09/11/2018
I like this mounting plate (BDW20061R2) because it appears to be well constructed and my 5000 lb Badland winch bolts up to it without modification. My bolt pattern is 3 x 6.6" and that works in the slotted holes on the plate. I mount the winch on the 2x2 hitch receiver on the back of my RAV4 and use it to pull docks and boatlifts out of the lake. The tongue on the mount is long enough to clear the back bumper and low enough that the outside mounted spare doesn't get in the way. In fact the back door on the RAV opens completely. Incase you haven't noticed, the price is very reasonable too.
by: Michael02/25/2018
Just received my front mount trailer hitch receiver, arrived on time and in good condition. Can't wait to install it
by: Greg 04/14/2020
Well made and very useful. I can now use my winch on multiple vehicles and its easy to store as well
by: Richard P01/06/2021
works fine as mount to move my winch to various vehicles .
by: Gerald F01/06/2021
Exactly what I needed
by: Ross 08/26/2022
by: John05/03/2023
by: William 09/15/2022
by: Jeff 07/17/2023
by: Neil 06/24/2021
by: Hank 03/31/2021
by: Timothy 10/08/2021
by: Carl 12/24/2021
14
14
See what our Experts say about this Bulldog Winch Accessories and Parts
- Compatibility of Bulldog Winch Mount with Optional Bumper on 2019 Polaris 450 Sportsman EPSAccording to Bulldog winch, they are fairly positive that the # BDW15159 would work with your OEM optional bumper, as shown in the diagram I provided. It looks like the mount wold attach so that the bottom of the winch would sit about halfway up the radiator opening, right atop that horizontal bar at the top of the bumper. You'll want to look at the trim pieces alongside the radiator grill to see if the mounting holes shown in the diagram are present. I was unable to see enough in the photo...
view full answer...
- Is There a Hitch Mounted Tray for Superwinch X3 Series WinchesThe Superwinch X3 Series Winches use a rather uncommon mounting pattern of two holes spaced 3.69" apart. Therefore, you'll likely haver to drill through the mounting plate in order to secure it. You can use any winch tray such as the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches part # BDW20061R2 so long as you are okay with drilling.
view full answer... - Are There Bulldog Winch Custom-Fit Steel ATV Winch Mounts for a 2001 Polaris Xplorer 250I do have an option for you to mount a winch on a 2001 Polaris Xplorer 250 but there are no custom mounting brackets for this. If there is a hitch ball mount you can use the Curt ATV Ball Mount Adapter part # C45006 and attach a receiver mounted winch tray like the Bulldog Winch ATV Winch Mounting Plate part # BDW20061R2.
view full answer... - Will Badlands 61384 Winch Fit on Bulldog Winch Plate # BDW20061R2The Bulldog Winch ATV Winch Mounting Plate # BDW20061R2 will fit your Badland winch 61384. This plate is designed to fit basically all common winch bolt patterns like what you listed.
view full answer...
- Front Mounted Winch on a 2001 Dodge Ram 1500I do have an option that will allow you to install the Superwinch X1 Series Winch 1101 in the front of your 2001 Dodge Ram 1500 however, they currently do not have a front bumper mounted winch bracket for your vehicle to my knowledge. Instead I recommend installing a front mounted hitch receiver like the Curt Front Mount Trailer Hitch Receiver # 31604 in addition to a receiver mounted winch mounting plate like the Bulldog Winch Hitch Mounted Winch Plate part # BDW20061R2.
view full answer... - Receiver Mounted Winch Plate and Wiring Kit for Winch on EZ GO Golf CartIn order to use the # e98989 ATV winch in the 2 inch receiver on the front of your EZ Go golf cart, you'd want to use a Trailer Hitch Receiver Winch Mounting Plate like part # BDW20061R2. Keep in mind, the winch might have a 5K capacity, but you'll be limited by the capacity of the receiver on your golf cart. The power lead is 6 feet long, if that's not long enough to reach from the front of the golf cart to the battery, you can get longer cables such as the 10 foot # BDW20307 which includes...
view full answer... - Mounting Plate Fitment for 2" Hitch and Bulldog Winch Powersports Series UTV WinchYes, I looked at the parts from the warehouse and confirmed that the Bulldog Winch Powersports Series UTV Winch # BDW15023 has a mounting bolt hole pattern that is compatible with the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches # BDW20061R2.
view full answer...
- Will the Bulldog ATV Winch Mounting Plate Work With the Superwinch Terra 35 WinchYes, the Superwinch Terra 35 Winch will fit the Bulldog Winch ATV Winch Mounting Plate part # BDW20061R2.
view full answer... - Hitch Receiver Needed on Trailer to Use Hitch Mounted Winch Plate # BDW20061R2To the best of my knowledge, the trailer in our video came from the factory with the hitch receiver option. This is not something that we installed here at etrailer but I do have good news. We have a solution for adding a hitch receiver to a trailer. Take a look at the 6 Inch Combo Bar with 2 Inch Trailer Hitch Receiver, # E-9. Just have a qualified welder weld this to your trailer and you can now mount the Superwinch S5000 and the Hitch Mounted Winch Plate with Handle, # BDW20061R2.
view full answer... - How to Winch a Boat and Trailer Down a 60 Foot Hill with 35 Degree SlopeWe certainly have a large selection of electric trailer winches and everything else you would need to launch and retrieve your boat but I am a bit confused on how you are trying to accomplish this. Would it be possible for you to sketch a quick diagram to further explain how you will be launching/retrieving the boat. I am also confused by how you would use a trailer hitch mounted winch plate while the boat is attached. Can you please clarify this for me so I can provide a solid recommendation....
view full answer... - Is it Possible To Mount a Winch Tray to a Hitch While Trailer is Hitched Up As WellFor what you are looking to do you would be best served by mounting the winch to the trailer so that you can pull items up onto the winch like that. You could maybe use the # D210 which has a hitch opening above the ball mount platform to allow you to mount a winch plate like the # C31010 or # BDW20061R2 but having the winch on the trailer will be your best option.
view full answer... - Recommended Hitch Receiver Mount For Superwinch UT3000The receiver mount compatible with your Superwinch UT3000 is the Bulldog Winch Receiver # BDW20155 with handles for ease of installation or # BDW20061R2 without the handles. I can easily recommend either option so it all depends on your personal preference for appearance and function. I've attached a couple videos to assist you in your decision.
view full answer... - Will a Badlands 3,500 Pound Winch Fit Bulldog Winch ATV Winch Mounting Plate # BDW20061R2Bulldog Winch ATV Winch Mounting Plate # BDW20061R2 was designed for Bulldog 2K to 6K winches for ATVs. While it hasn't been tested with a Badlands winch I did measure some of the various holes in this mount. The slotted holes on the outsides will accept a 3 inch (front to back) by 4-7/8 inch (side to side) mounting pattern.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Written by:
Matthew S
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.