Can Bulldog Winch Hitch Mount Fit Front and Rear Hitch of 2009 Chevy Silverado 2500HD

Question

Question:

This allows me the option for using my Champion 12k winch on either the front or rear of my 2009 Chevy Silverado 2500HD Duramax Crew Cab. Is there a 2 gauge harness for wiring to both front and rear of the truck? Is there an isolator/or switch that will allow me to power either to the front or rear? Champion uses Anderson SB350 Yellow quick connectors.

asked by: Robert R

0

Expert Reply:

The hitch mounted winch mount from Bulldog Winches part # BDW20155 would allow you to mount a winch at either the front or the rear of a truck like your 2009 Chevy Silverado 2500HD.

For a front of vehicle wiring kit that has 2 gauge wire you'd want the part # BDW20205 and then for a rear vehicle kit you'd want the part # BDW20207.

expert reply by: Jameson C

0

Answer 1

We went and pulled a Bulldog Winch Receiver Mount Kit #BDW20155 from our warehouse to measure distance from center of pin hole to nearest weld edge and found it to be 6-1/4 inches.

view full answer...

Answer 2

The Bulldog Winch Receiver Mount Kit part #BDW20155 has an industry standard mounting pattern (10" x 4.5") which all winches up to 12,000 lbs share so yes it will work with a Ramsey RE1200 Winch.

view full answer...

Answer 3

While we do have a U.S.A. made option, the Bulldog Winch #BDW15018 is made in China. For a great American alternative, the highest capacity U.S.A. made winch we have is the Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered #DL24876.…

view full answer...

Answer 4

If you don't mind drilling Jeremy I would recommend using all three mounting holes of the Dexter Actuator part #DX89FR or if you know a welder just have them weld it to the trailer. If you were going to only use two though use whichever two line…

view full answer...

Answer 5

To install the B&W Patriot 5th Wheel Trailer Hitch #BWRVK3200 in your 2003 Chevy Silverado 3500 the best option is the B&W Custom Installation Kit w/ Base Rails #BWRVK2500 because it will not require drilling into your truck's frame rails…

view full answer...

Answer 6

To install the B and W Fifth Wheel Rail Kit part #BWRVK2500 in your 2006 Chevy Silverado requires no drilling into the frame. Holes would need to get drilled through the truck bed but that's it.

view full answer...

Answer 7

To determine the maximum trailer weight capacity you can tow with your 2006 Chevy Silverado 2500, you will need take your Gross Combined Weight Rating (GCWR) and subtract that by the the Gross Vehicle Weight (GVW) of your truck from the (GCWR) that…

view full answer...

Answer 8

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E as…

view full answer...

Answer 9

We have had Cequent the maker of Reese 5th wheel rails, #RP30035, in to train us. They state that their rails are stong enough for the truck's capacity is a way of helping people stay within the limits of their vehicle. We have had trucks that…

view full answer...

Answer 10

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

view full answer...