California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at part number BDW20060. This is the Bulldog Winch Mounting Channel. This is designed for the Bulldog 4000 pound winch. The tabs that stick up here on the front is going to be for your fairlead attachment. If we take a measurement, the distance that we have between mount holes, measuring center on center, that's going to give us a measurement of 6-1/2 inches. If I flip this up, you can see the different mounting patterns that this offers. You're going to have a 4-bolt mounting pattern, which is going to be the bolts here on each corner of the mount. Then you're going to have a 2-bolt mounting pattern as well.
Again, this is designed for the 4000 pound Bulldog Winch, which uses a 4-bolt mounting pattern. We're going to go ahead and go over some of those measurements real quick. The distance that we have between these two holes down here, center on center, it's going to measure right at 3 inches. Going this direction, center on center, that's going to give us a measurement of about 6-5/8 of an inch. Two-bolt mounting pattern, measuring center on center, it's going to measure about 3-1/8 inches apart. When it comes to the actual mount, this is going to be a steel construction. It's going to have a really nice black powder coat finish on it so it is designed to resist rust and corrosion. Taking a look at the overall dimensions, measuring from edge to edge going this direction, it's going to give us an overall length or measurement of about 5 inches.
Going this direction, measuring edge to edge, this is going to give us a measurement of about 7-1/2 inches. That's going to do it for our review of part number BDW20060. This is the Bulldog Winch Mounting Channel. .
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
I purchased the Sinoking 6000lb winch from [online retailer] and it didn’t include the mounting plate. I happened to find this one after some searching and figured I’d have to redrill some holes. It turns out I didn’t because it was a perfect fit! Anyone who has that Sinoking winch, this is the plate you need.
Just what I needed to mount the Welch to the. Gator front bumper!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.