2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw
(20 reviews)
Price: $0.70
In Stock
2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw
Item # TFX225
Our Price: $0.70
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (20)
- Q & A (0)
- Photos
ABS Fasteners Accessories and Parts - TFX225
- Tie Down Anchors
- Hardware
- Torx Screw
- ABS Fasteners
- 2-1/4 Inch Long
Torx flathead screw makes securing a wood floor to your trailer quick, easy, and economical. Screw has a 1/4" diameter and Type F point for heavy-gauge sheet metal, aluminum, cast iron, and zinc.
Features:
- Torx screw secures wood floor or wall to trailer
- Tapered flathead sits flush with surface
- End of steel screw has a blunt tip with multiple cutting surfaces
Note: Requires 7/32" pilot hole.
Specs:
- Dimensions: 2-1/4" long x 1/4" diameter
- Threads per inch: 20
- Type F point
- Quantity: 1 screw
25C225FXF0G/P217 2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw
Replaces TFX225 2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw
Customer Reviews
2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw - TFX225
Average Customer Rating: 4.8 out of 5 stars (20 Customer Reviews)
Torx flathead screw makes securing a wood floor to your trailer quick, easy, and economical. Screw has a 1/4" diameter and Type F point for heavy-gauge sheet metal, aluminum, cast iron, and zinc.by: A.B.5908/27/2021
A little pricey but they do the job right. Putting a new deck on my 18' dovetail trailer ( boy talk about pricey the pressure treated 2x8" and ply cost nearly xxxx bucks, just for the deck and some sideboards!)and tried some worthless bolts from the local hardware store and they are crap.These thread right up and tighten up the way they should. Don't know about the longevity but I'm sure they will last longer than the wood deck.
by: Kevin 03/07/2023
replacing wood trailer bed. Screws are a perfect match.
by: Keith07/30/2019
2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw.
I needed to replace my trailer deck and spent hours surfing the web for the right screws. It was frustrating trying to find them online. I checked all my local hardware stores and no one had the right product. Then I found etrailer.com. They had exactly what I needed and I was able to order the exact quantity needed. They were reasonably priced and perfect for the job. Very happy with the product and recommend etrailer.
by: Chuck b11/25/2016
Screws worked very well on a stack body truck, I predrilled the boards & the steel C channel. I would use them a again if a another stack body or trailer project was planned thank you .... Chuck B,
by: Frank 10/31/2022
Easy to install.Very strong fit.couldnt believe how fast this project took.Definetly the 21/4 screws for 1 inch boards on wire mesh trailer.Dont go smaller.
by: Mark B06/14/2016
Been looking everywhere locally for these trailer floor screws unsuccessfully, so I turned to etrailer.com once again. These are very high quality at a great price with super fast shipping! Next time I'll save the time and go to etrailer first.
by: Dave B.05/11/2011
When replacing deck on my trailer I went on line found replacement deck screws, ordered them and had them 2 days later. Great service, couldn't ask for anything more. Thanks
by: Michael G.07/01/2015
Received all the items that I ordered in a couple of days. Etrailer kept me up to date on my order and e mailed me when it shipped and arrived. This is one of the best company's that I have ordered from and will order from them again.
by: Rob08/25/2020
Just what the doctor ordered for putting on some trailer deck boards! Drill a 7/64 hole then in these go!
by: Brian S.06/24/2016
I followed the directions. Drilled a 7/32" pilot hole and finished installation with my impact gun. I ordered enough floor screws/bolts for almost the entire floor. Great Prices!
by: Mike03/19/2015
Product worked as expected and etrailer's service was spot on. Will use these folks again in the future.
by: Randy B.07/09/2015
Great product. It is exactly as shown. I have been very pleased using them in my work.
by: Terry 09/10/2020
Everything went smooth and got my product in timely matter.
Thanks
by: John 01/20/2022
Had the exact screws I was looking for and arrived quickly
by: Bob Taylor03/14/2022
Just what I expected and timely shipping
by: mike06/15/2015
these were as described and like the original screw
by: Mark10/28/2018
works great great company
by: Michael 10/08/2022
by: Chad 08/26/2021
by: Heather 03/22/2023
20
20
See what our Experts say about this ABS Fasteners Accessories and Parts
- Type and Size Fastener to Attach ACQ Treated Deck Boards to Aluminum Trailer FrameThe length of the screw you need will depend on how thick the tubing is. You can use the shorter 1-1/2 inch length # TFX150ACQ, which will get you through the deck boards and into the tubing. The screws we offer are specially designed to work with the ACQ treated wood. If you used anything other than screws rated for ACQ lumber (like the # TFX225 you referred to) or ones made from stainless steel, they chemicals in the wood would cause the hardware to corrode pretty quickly. The screws...
view full answer... - How are the Long Black Torx Wall Liner Screws MeasuredThe 1" Long Black Torx Wall Liner Screw part # WLS100 is measured from the head to the tip, so it is 1" long from the highest point to the lowest point. It uses a T25 bit like part # TX425. We do have the Long Black Torx Wall Liner Screws available in 1-1/2" long part # TFX150, 2-1/4" long part # TFX225, and 2-1/2" long part # TFX250 but these use a T30 bit like part # TX430-1.
view full answer... - How Many Screws to Should be Used for Re-Decking TrailerWhen securing things down I tend to think "the more the merrier" so I personally would probably put at least 2 of the 2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw # TFX225 per board per crossbeam especially if the plan is to use the trailer frequently and for large loads. The choice is ultimately up to you though to be honest. This screw actually comes in a 40-pack as well with part # TF01225 so since you're doing a whole re-decking project I'd buy in bulk. If you don't...
view full answer... - Availability of a White-Headed Wall Screw for a Cargo Trailer We have several wall liner screws such as # WLS100 (1-inch) and # TFX225 (2-1/4 inch) to name a couple. Unfortunately, none that are white-headed at this time but you could paint over the head with a hard enamel because it air dries to a hard, usually glossy finish. I included a link showing you all of the wall screws we currently offer.
view full answer... - Can 2-1/4" Long Standard Torx TFX225 Be Used with Pressure Treated Wood and 7/32 inch Pilot HoleYes, the part # TFX225 will work for you. It can be used on pressure treated wood and requires a 7/32 inch pilot diameter like you said you have as well.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
A.b.59
8/28/2022
Well, its been about a year since I replaced the ben in my trailer. These self tapping screws do a good job. The weather here is humid and wet nearly year round and I have not seen any sign of rust or screws backing out. Good product.