2-1/4" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood

These screws were perfect for replacing the treated wood floor of my utility trailer. They screwed directly back into the same holes that were made when the last floor was installed. Etrailer made the purchase process easy, and shipping was quick.1557184

Richard S.

4/15/2024

The screws are holding perfectly, and my trailer still performs great!

These screws were perfect for my trailer repair! I am very pleased with the product, the directions, and the new and improved look of my trailer. I would highly recommend this product to anyone!1296277

Steve

10/6/2023

All is going well. No rust, corrosion, or broken screws. I would still highly reccommend this product.

Mike L.

10/21/2023

@Steve We're glad to hear that, thanks!

Product showed up in a timely manner and was easy to install and did what was required of it1730437

by: Glenn 12/13/2023

Worked perfectly for securing 2x4 floor to trailer frame.1702089

This is the second time I've purchased this product, and both times it's stood up to the test. Shipping was incredibly quick also. I use these screws to repair an outdoor city balcony deck, which is mounted to a solid steel frame.

The key is to ensure the pilot hole is completely drilled, and the screws go into the steel like butter afterwards. I only broke one screw head and stripped 2 others out of 100, and this was because my pilot hole was not as clear as it should have been.436490

Click to Enlarge

Click to Enlarge

This is a great screw. Haven't broke any or had any issues installing. Worth the $.1717672

Great service for Trailer parts.
The deck screws arrived in perfect condition.
Price couldn't be beat, hard to find part.
Perfect for re-decking my home built trailer.
I'll shop your store again...
Thx 68773

Click to Enlarge

by: Kurt04/23/2021

I was very happy with the product. They worked just as they should have. Made re-decking my trailer a breeze. Securing the deck boards at every cross member makes a world of difference in how long the deck lasts.1019919

Click to Enlarge

Yes, they're expensive but the black phosphate coated ones really should not be used in most situations. After looking through 20 different fastener manufactures catalogs, these things really are next to impossible to find elsewhere! Just buy it and finish re-decking that trailer!1553124

Worked great! Drilled in 200 of these screws and only 1 broke. The one that broke was justified as I was going through 2 layers of 10ga steel on that one spot. The second one I tried went in fine. Shipped fast and worked as promised.

My recommendations to use this easily: Drill 7/32" pilot holes with a cobalt bit and have a lot of bits on hand if you plan to drill a lot of holes. Also, use a T30 screw bit and if you have one, an impact driver is recommended. Boards are now sitting secured and tight to the frame. Very pleased and much easier than carriage bolts. 173138

John S.

2/10/2016

After 1 year, all the screws are still holding strong and none have backed out, corroded, or broke. Still very Happy!

by: Sam G.09/08/2016

Replaced the wood deck on my trailer. It works out great when you can use the proper screw to do the job. was an easy project and securing down the 2" x 6" wood decking to the metal frame of my trailer.292303

Sam G.

9/8/2017

Great Holding up even in the Hot weather here

This product worked perfectly. I did not break or strip any of the screws. I did dip the tip in oil to get some lubrication. 819447

Click to Enlarge

great product, 175 screws with no problem! Mail innovation shipping is pathetic thou
232225

Click to Enlarge

by: Dan09/06/2019

Must pre-drill these deck fasteners! They worked perfectly on my trailer698354

Daniel B.

9/7/2020

Still holding strong. Im going to order more to screw down the deck on a hay wagon

I am in the process of repainting and putting a new deck on my car hauler. I ordered the floor screws for treated lumber even though I'm using white oak. They should last a long time. The Aero Pro LED light kit and LED light bar will be a nice upgrade that I have been considering for a long time. The 7" long white/11" long red conspicuity reflective tape strips are a perfect replacement for the strips that were on it since new. etrailer has excellent products at very fair prices. It is very convenient to find everything you need at one sight and order anytime of the day or night. If you have questions, they have people that can answer them. Great Company.436760

All of the screws went in without bending, stripping or braking. I redecked a utility trailer with 2x8's. The frame cross-braces were 3/16 angle steel. I highly recommend getting a few cobalt 7/32 drill bits, either pilot point or split point. Don't try to use regular drill bits for the pilot holes. Even the cobalt bits will dull if you don't use cutting oil between holes (I used bar oil). Also, try to place your pilot holes where there is only one layer of metal. I broke a bit in one of those spots that is now a permanent part of my trailer. Other than that, just make sure you use a good quality T30 bit and an impact driver. Great product.125448

Screws worked very good for fastening new 2x8 PT boards on my flatbed trailer. Did have a few break but quickly found a little trick that worked great. After pilot drilling the holes shoot a squirt of white lithium grease down the hole in the board and screws go in like butter using a 1/2" drive impact wrench. Also make sure you have plenty of drill bits, I went through 4 to sink 165 screws. 267830

I had the same experience everyone else seemed to...only screw that broke off, the pilot hole had issues and drill bit had broken off in. I thought the screw could push the bit on through. It did not. The rest went into the angle iron on my trailer like butter! I ended up going through 4-5 drill bits, but these screws were worth the money! 711429

product was top notch and exactly what I needed to finish the replacement of my trailers decking; used the recommended drill bit for the pilot hole and these zipped right into place939875

We needed to replace the bed of our utility trailer. Could not find the correct bolt/screw locally but we found it with your company. Placed our order and it arrived very quickly. Plan to do the install this weekend and don't anticipate any problems. Excellent service from the company!409096

These screws seem to be well made and the coating should help them last a long time. They are much better than the rusted ones that came with the trailer (only 2 years old). Installed with an impact wrench and none snapped.57806

by: Darlene E03/13/2017

The restoration project is still not complete. We were pleased with the quality of the products we purchased from etrailer and look forward to putting them to the test as this project comes to a close.355573

Good product. Replaced boards on my trailer deck. Correct screws for the job.599046

by: Zachary11/19/2018

Used these to add pressure treated to my car trailer worked great !583930

Great screws, hard to find these in a variety that are rated for pressure treated wood, all I could find locally were black oxide. All I did was drill the 7/32" pilot hole and then ran them in with an impact driver. Nothing to it.544989