1" Long Black Torx Wall Liner Screw
(14 reviews)
Price: $2.08
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (14)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - WLS100
- Tie Down Anchors
- Hardware
- Torx Screw
- Redline
- 1 Inch Long
Torx flathead screws make securing a wall liner to your trailer quick, easy and economical with a 1/2" diameter head and cutting points for heavy-gauge sheet metal, aluminum, cast iron and zinc. Often, a starter or pilot hole must be drilled.
Features:
- Tapered flathead sits flush with surface
- End of steel screw has a blunt tip with multiple cutting surfaces
- 9 threads per inch
- Dimensions: 1" long x 1/2" diameter head
WLS100 1" Long Black T25 Torx Wall Liner Screw
Video of 1" Long Black Torx Wall Liner Screw
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Tie Down Anchors WLS100 Review
Customer Reviews
1" Long Black Torx Wall Liner Screw - WLS100
Average Customer Rating: 4.7 out of 5 stars (14 Customer Reviews)
Torx flathead screws make securing a wall liner to your trailer quick, easy and economical with a 1/2" diameter head and cutting points for heavy-gauge sheet metal, aluminum, cast iron and zinc. Often, a starter or pilot hole must be drilled.by: Susan 02/13/2024
Paula helped me find just the right type of screw that I needed to fix my trailer. They worked beautifully!
by: Gerry 01/23/2024
Needed screws to replace plywood in horse trailer, worked perfectly.
by: Rich05/05/2022
Just what I needed, worked great
by: Gary H11/06/2015
The screws were just exactly what I wanted to use to install some tie downs with on my trailer.
Gary H.
11/9/2016
Still holding fast ,no problems.
by: Tom P08/06/2013
I wanted exact replacement screws for the trailer repair I was making, and etrailer was only one of 2 places that had this screw. I did not need that many, the other place required that I by a box of 100. I appreciate being able to buy a reasonable quantity with a reasonable shipping cost. Thanks.
by: Curt G09/08/2016
Screws worked great. I was a little sad that the head was smaller than the oem I removed. Had the head size been larger it would have been perfect. That said, the liners in my horse trailer are holding just fine, I just had to use more screws.
by: Lindsey Simons11/14/2014
Did not have to use these screws after all. We're able to use old bolts. I'm sure they would have worked fine if needed. Thanks for your help in getting them ordered.
by: Glenn M.10/14/2016
Product arrived as described. Excellent communication and follow-up. A pleasure to do business...
by: Happy camper05/17/2022
Just what I needed, thank you
by: David 08/23/2021
Worked as expected.
by: Al11/12/2019
They’re good screws but a bit pricey.
by: Karen 07/11/2023
by: William 08/23/2022
14
14
See what our Experts say about this Redline Accessories and Parts
- Self Tapping Screw Recommendation for Installing Exterior Light on TrailerSelf tapping screws like the part # WLS100 which has a Torx head or a part # FA1131822 which is a hex head style bolt would work well. We don't normally see people seal the lights to the trailer as most light assemblies are a weather proof or waterproof design and don't require it. For a sealant we recommend the # 0160297 for sealing trailer roof vents. This would work well for a light assembly as well.
view full answer... - How are the Long Black Torx Wall Liner Screws MeasuredThe 1" Long Black Torx Wall Liner Screw part # WLS100 is measured from the head to the tip, so it is 1" long from the highest point to the lowest point. It uses a T25 bit like part # TX425. We do have the Long Black Torx Wall Liner Screws available in 1-1/2" long part # TFX150, 2-1/4" long part # TFX225, and 2-1/2" long part # TFX250 but these use a T30 bit like part # TX430-1.
view full answer... - How Many 1 Inch Long Black Torx Wall Liner Screw are in a PackThe Redline 1" Long Black Torx Wall Liner Screw, part # WLS100, is sold singly. This way you can order just as many as you need. If you need a screwdriver bit for these screws you will want part # TX425.
view full answer... - Screw Recommendation for Securing E-Track to Metal Plate Under Trailer FloorThat is going to depend on the thickness of the floor on your cargo trailer. I attached a link to a page that has all of the self tapping screws you could use for E-tracks. You will want to select the length you need from the filters on the page and the correct length screws would be listed. There are screws from 1 inch to 2-1/2 inches in length like the # TFX250ACQ.
view full answer... - What Bolts Are Needed For Installing T-Strap Hinge # PLR2008-SSP on a Trailer? Based on your picture it appears your trailer currently uses some screws like the 1" Long Black Torx Wall Liner Screw # WLS100. I do recommend verifying the correct bolts needed with the trailer manufacturer as the T-Strap Hinge # PLR2008-SSP you found may require a through bolt and nut depending on how your trailer is constructed. You will likely need to source that hardware locally to find the correct length.
view full answer...
- Availability of Torx Self-Tapping Screw for Exterior Panels of Haulmark Enclosed TrailerThe closest we have to what you need is the part # WLS100 which is a 1 inch long Torx screw with the self-tapping head.
view full answer... - Availability of a White-Headed Wall Screw for a Cargo Trailer We have several wall liner screws such as # WLS100 (1-inch) and # TFX225 (2-1/4 inch) to name a couple. Unfortunately, none that are white-headed at this time but you could paint over the head with a hard enamel because it air dries to a hard, usually glossy finish. I included a link showing you all of the wall screws we currently offer.
view full answer... - Fasteners for Attaching Marine Plywood Decking to Snowmobile TrailerThank you for the photo of one of the original decking fasteners from your aluminum snowmobile trailer. It appears your fastener has a taper at the point; but then again this might be erosion from exposure to winter road salts. We do offer several lengths of Torx fasteners, including some specifically for ACQ-Treated wood, ranging from 1-inch (part # WLS100), 1-1/2-inch (# TF01150 that you referenced) to 2-1/4- and 2-1/2-inch lengths. The key for your proper replacement size is the depth...
view full answer...
- Recommended Hardware to Attach the Full Size Locking Steel Flush Door LatchThe Full Size Locking Steel Flush Door Latch part # L3980 can be mounted with a variety of different types of hardware. As you mentioned, pop rivets or carriage bolts would be the most secure. You could also use something like the Long Black Torx Wall Liner Screw part # WLS100 as torx bits are more of a speciality tool. The correct bit for this screw is part # TX425. If you have a metal door you could weld it on as well.
view full answer... - How Does A-Frame Trailer Tongue Tool Box Mount to the Trailer Frame?The RC Manufacturing T-Series Trailer Tongue Toolbox - A-Frame - Steel # 313-TM362016M is just the steel box. Most people drill into the bottom of the box to hold the box to the trailer frame with self-tapping screws like # WLS100. You can weld it if desired, but that is not how most choose to attach the box to their trailer frame.
view full answer... - Recommended Screws for Installation of Plywood on Enclosed Trailer WallThe 1" Long Black Torx Wall Liner Screw # WLS100 is the best option for the plywood installation. These screws are fine thread and made for metal studs. They have a tapping edge but often a starter or pilot hole should be drilled. You can then use the Torx Head Screwdriver Bit for WLS100 Wall Liner Screw # TX425 to snug the head flush.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rich
5/6/2023
It’s working great !!