1-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood

These were excellent. I wasn’t quite sure how these worked, but figured it out quite quickly. These are absolutely solid built and I’m happy with how my new trailer deck turned out. The cost does add up when working on a bigger trailers so be aware.1730846

If you are going to do it... Do it right. Why fasten your decking with screws that are going to rot off in a couple of years. I built a custom 6 X 9 trailer. Didn't cut any corners on the axle, lights (LED's), steel or anything else. These are the 'best' screws I have found. I did spend some time doing my homework on other as well. MOST others are not for use in treated lumber! Many are not even galvanized (some are just zinc or cadmium). Not only are they the best screws, they are the best price I have found. No, I don't work for them either. :)390919

Click to Enlarge

I ordered these screws for a small trailer I refurbished this winter. 1st I tried some from 1 of the big box stores. I started to install the decking with these screws. I broke 1 and stripped 1 and had only installed 4 screws. I threw these in the trash and ordered these from e trailer, I even ordered extra figuring for breakage! I drilled and installed 110 of these screws in a couple of hours . NOT even 1 BROKE or Stripped out. These are a great product and will use them again when I need to install a trailer deck. I am 100% satisfied and would highly recommend this product if you need to install wood on to steel framing. Thanks.181543

Click to Enlarge

Click to Enlarge

These worked really well for attaching exterior plywood to my steel trailer. I liked that I could order the exact quantity I needed. None of them broke during installation. The only suggestion would be to include the recommended drill bit size with the order, although I was able to find it on the etrailer website so not a big deal388122

Click to Enlarge

Click to Enlarge

Shipment came fast with no issues. 1753417

Great product would buy again. 1721656

Used these screws for attaching 5/4" PT decking to my new dump trailer. I installed into 3/32" & 3/16" box steel and had no thread or head failures. Everything attached fine. The screw was just the right length to grab the full size thread area on the screw. The decking was 1" thick196657

Bob P.

5/26/2016

They have held up well. I had to remove 4 center boards and they came out well and I was able to reuse them-a good product.

Just what I was looking for to secure down the new decking on my 2002 Triton XT-10 trailer. I even had to drill new holes in the aluminum frame and used one of these screws as a tap. Worked great and big savings compared to local hardware store that wanted $1 per screw. 137049

Bryan H.

9/21/2015

I year later and still holding up great!

Just what I needed to re-deck an old Triton atv trailer. These self-threading screws save a lot of time. I have not had them long enough to know how they will compare to galvanized for corrosion, but so far they look good.178930

Matt N.

4/25/2016

After a year they still look great. Very satisfied.

I have used this type of trailer deck screw previously on other projects, nothing compares from those big box stores to include the fastener specialty chain stores. The torx head is a must.357828

Bernard C.

3/23/2018

These deck screws are just as the day I installed them. Great product!

by: Mark S07/30/2016

These scews worked very well when I replaced the floor on my Titan Aluminum trailer. They matched OEM parts.277722

Mark S.

12/29/2017

Still working great, thanks

I used a 3/16" drill bit to drill all of the pilot holes and put in approximately 80 screws to secure the new decking to my metal trailer frame. Only had two issues with screws breaking and I felt it was from me over - torquing and not from poor quality. 421842

by: Charles 10/23/2022

yes, I put a new deck on my snowmobile trailer and these worked very well.1454403

I bought six only need four . I broke one trying to use it to tread the hole . then i pull out tap & die set and had no problem after that20919

Click to Enlarge

I was a bit skeptical with the screw once I received them as the screw head was smaller than the old screws I removed. After looking at a newer model trailer of the same brand I have I realized they went to these same screws. The screws worked flawlessly and never once did I break or strip one out. Like even passed the screw information to a friend who needs to do the exact same thing but to a longer trailer. This is my second purchase from etrailer and I've never been let down. Great people to deal with. 216555

Used these to re-deck my Aluminum ATV trailer. Worked great. I much prefer the Torx head vs a standard Philips. The trailer was originally decked with Philips screws and some of them did not want to come out (started to strip). I do not see that happening with these. I used Marine Ply not treated but I expect the screws to last a good long time as they are rated for treated use. 191123

by: Challenge Towers07/16/2019

We use these for our metal framed tree platform's decking in our challenge course and zip line installations. We've seen some corrosion over the years in certain environmental conditions, all in all they hold up well. Torque drive (T30)is the only way to go.
Great product, but why did the cost go up 75% in the past year? 671089

I received my order today. Fast delivery. Excellent product. I'm using them to replace the deck on a small utility trailer I have. I have used your screws in the past for another trailer deck project. They really work well and I'm very pleased with the performance. Thank you for your excellent service.212770

Worked great for installing new wood on snowmobile trailer.1392237

by: Marc05/14/2017

Product is holding up great. Everything from ordering, prompt arrival, support, quality etc has been fantastic. etrailer.com gets a perfect score from me. 380260

T-30 Torx screws for treated plywood trailer deck worked as expected. Drove 60 with impact driver into existing aluminum frame without any problem.227125

High quality fasteners at a reasonable price, shipped my door in 2 days.
I highly recommend e-trailer266135

Exactly what I needed, probably would had to drive all over town trying to find those trailer deck screws. Ordered and had them delivered in 2 days. 259062

Was excited to find these fasteners specifically for treated lumber. Worked great for rebuilding snowmobile trailer. Price was better than anywhere else.366161

Using them to install wood decking to aluminum c-channel floor joist. Thickness range of 1/4 to 3/8 and they worked better than expected during my testing.313884