2-1/2" Long Torx Floor Screws, 40/Pkg

Review of Redline 2-1/2 Torx Trailer Floor Screws - TF01250

I have installed 73 of these screws into the flange of 3" C channel.

75 screws, none have twisted off or not tap the pre-drilled holes.

Driving the screws with a Milwaukee 2757-20 Impact Driver.

I must be putting in more screws in than the original installation of the deck, I will be ordering more to finish this job.

As long as etrailer uses this vendor, these screws will not disappoint!!1739153

Great Product + Great Advice + Fast Delivery = Excellent Project Experience.

I bought Deck Screws, Tail Lights and wiring harness.

My only issue was I needed more wire to wire the marker lights and the brakes.106229

Click to Enlarge

Jayb240

11/4/2014

Trailer rebuild has been working fine.My only issue is the center marker lights are a plasticHousing that broke. I have seen trucker lite bars thatAppear to be the solution.

Rachael H.

11/6/2014

Thanks for the reply. If you need to replace the center marker light bar you might check out # MCL93RB. It looks like this might the right replacement part you need, and it will match the rest of your LED trailer lighting upgrades.

by: David H.11/01/2020

I decided to completely put a new wood floor in my 22 foot slant-load gooseneck horse trailer. The old wood was rotten in many places and I had to remove or cutoff the old screws (they were self-tapping screws). I needed to put down 2x8 treated wood onto the frame and then fasten with new screws. I searched for replacements and came across these. Just the right length to go through the wood and angle iron frame. Just pre-drill the holes using the correct size drill bit and then use the correct size torx bit to fasten them down with a drill. You can probably find the drill bit to use on the description on etrailer and/or with the package of screws. Be sure to use the correct size for the hole. These are much better than self-tapping. I included a picture of the trailer and a picture of the wood floor so you have an idea.906723

Click to Enlarge

Click to Enlarge

Very bad experience. Placed an order on 5-24-23 for an item that showed to be in stock on the website. Receive an email stating that is back ordered and due to ship 6-5-23, several emails later still no wiring harness. Finally 7-10-23 I receive an empty envelope, well not completely empty it has a letter from USPS stating that the enclosed was found loose in the mail. A box would have been more appropriate to ship this item, as I have been in shipping for two different companies for 38 years now. I am unable to upload pictures of the envelope, I will send them via email.1628594

I purchased these deck screws to replace the worn out deck on my utility trailer. They are the exact replacement screws for what was used when the trailer was built. After removing the old deck and fighting the old screws out, some I hade to drill out. I ended up using all of the original holes with no new holes needed. They are 100% quality and worked great. Helped me put new life in my 11 year old trailer. Time to go back to work for another 11 years!409503

Click to Enlarge

Click to Enlarge

by: TJ03/20/2022

Worked well securing deck to trailer. 1275019

Tj

3/21/2023

Great

matching exactly with what I have on my trailer. Website was clear and product came when they said it would. No complaints. Will shop here again1460998

I get all of my trailer needs from etrailer.com. I don't bother searching for the things I need because eTrailer.com always has it and at a good price with quick shipping.

Recently replaced the floor on my 20 foot flat bed trailer and needed the special screws that work with pressure treated lumber. etrailer.com had exactly what I needed plus help in selecting the right screw for KDAT material.699055

etrailer is my go-to supplier for anything I need for our 7 equipment trailers. Recently I decided to re-floor our 20 ft flatbed gooseneck trailer and etrailer had the special fasteners I needed for the KDAT material I wanted to use. Ordered 2 bags of these screws and 3 days later they were delivered. Great selection of products, great customer service, super prices, and quick delivery. What more could you ask for?693618

These are exactly what I ordered unfortunately the package came open inside the shipping box and a few of the screws where lost but overall a good product and a good company1419490

Shipping was quick and screws worked perfectly. 418849

Click to Enlarge

I put a new deck on my trailer! The frame is aluminum and these screws worked perfectly once you drill the pilot hole. I put in 120 screws and they pulled the boards down tight and not one of them stripped out on me. Well worth the cost !1104205

by: Tom A.10/13/2016

Product works great, and secures the wooden deck to the frame of the trailer without having to pre-bore holes.306560

Tom A.

10/13/2017

Outstanding, the screws have really worked out well. They went down easily and have held well over the year.

Good quality product. I had questions on the installation of the trailer floor screws and received excellent help from them. All my questions were answered and the installation went great. 520146

Very pleased with purchase and easy use of website. And the added information for wiring harnesses.
153246

i order'd torx screw's for one of my heavy trailers and exactly what i needed and wanted showed up a few day's later. Thank You.279240

Product was Exactly as described plus came in a timely manner also as stated. Not my first order with etrailer every time was pleased with transaction.544016

We used these trailer screws to redeck our boat slip. Worked by well. We are return customers to etrailer and will continue to place orders with them.784419

Order arrived the day it was supposed to, quality product. Much more so than the self drilling I was looking at in HD, Good info on the site regarding pilot holes etc.589123

These are perfect for securely attaching wood/decking to angle iron. With a 1/4" predrilled hole, they easily self tap. Counter sink the hole for a clean, flush finish.

7444

by: James 01/18/2022

perfect replacement for the rusted old ones1245684

The perfect screw for trailer...used 2x8 neat professional look602720

by: Billy11/13/2018

Exactly what I was looking for. Easy order and fast delivery. Would order from again.582525

by: David’s trailer repairs08/20/2020

Working like a charm after a year. Just drill them in and you are done.865291

by: George 06/30/2021

Worked as I needed. Have recommended your sight to friends.1079698