Can 2-1/4" Long Standard Torx TFX225 Be Used with Pressure Treated Wood and 7/32 inch Pilot Hole
Question:
1Are these self-tapping screws suitable for fastening pressure treated wood? 2 Will they work with a 3/16inch thick C Channel frame using a 7/32inch pilot hole?\ Thank you
asked by: Jeff
0
Expert Reply:
Yes, the part # TFX225 will work for you. It can be used on pressure treated wood and requires a 7/32 inch pilot diameter like you said you have as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw
- Accessories and Parts
- Tie Down Anchors
- Hardware
- Torx Screw
- 2-1/4 Inch Long
- ABS Fasteners
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 2-1/4" Long Standard Torx Trailer Floor and Wall Liner Screw
- Shop: 1-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Article: Most Popular Wheel Bearings
- Q&A: Availability of 2-1/4 Long Torx Screw for ACQ Treated Wood in Bulk
- Q&A: Recommendation For Screws To Attach Pressure Treated Decking To a Flat Trailer
- Article: Trailer Lighting Requirements
- Q&A: How to Determine Length of Replacement Brake Shoes Needed
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Hub for 10,000 Pound AL-KO Axle
- Q&A: Which Torx Trailer Deck Screws for 2 x 6 Floor Boards
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: How to Survive the Winter In Your RV
- Q&A: How Many Screws Are Included with the 2-1/2" Long Torx Trailer Floor and Wall Liner Screw
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Using a Portable Generator on RV
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)