9" Wide x 97" long x 15-1/2" tall. These sturdy teardrop fenders protect your triple-axle trailer from road debris. 16-Gauge, cold-rolled steel is durable. Bolts or welds onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today we're going to take a look at the etrailer triple axle steel trailer fenders for 14 inch to 15 inch wheels. This is for a quantity of two fenders. These are rounded fenders, that'll cover three tires on each side of your triple axle trailer. These fenders will act as a splash guard, helps keep writing road debris from hitting other vehicles.
That'll help protect your trailer's cargo. Now just want to zoom in. Talk about the edges on here, the inner and the outer edges. They both use a one-inch curve radius slip for nice extra protection and top quality appearance. The material of this fender is a sturdy 16 gauge full roll steel construction.
It is a raw finish, so you will get some surface rust spots that'll need to be sanded. And it does need to be primed and then painted to provide even more resistance to corrosion, or to match your trailer's paint finish.Now this is a weld-on or bolt-on installation. They are not pre-drilled. And the mounting brackets for bolt-on installation are sold separately. These fenders are made in the USA Application, again, it's for triple axle trailers with 14 inch to 15 inch diameter wheels.
It is for a quantity of two fenders. They are about 19 pounds each. And the last thing, I just want to give you the dimensions on them. The length from one end, all the way to the other end, it's 97 inches long. The width on them is nine inches wide.
And then the height from the bottom to very top is right at 15 and a half inches tall. But that should do it for the review on the etrailer triple axle steel trailer fenders for 14 inch to 15 inch wheels for a quantity of two..
Average Customer Rating: 4.6 out of 5 stars (873 Customer Reviews)
9" Wide x 97" long x 15-1/2" tall. These sturdy teardrop fenders protect your triple-axle trailer from road debris. 16-Gauge, cold-rolled steel is durable. Bolts or welds onto your trailer.Decent quality. Used in salt water for one season and no significant corrosion issues. Both fenders were delivered with dents and were warped requiring me to repair. Would not not purchase again.
exactly what we needed, top of the line knowledge and customer service.
I was able to get them from you cheaper and faster than anybody else I appreciate the way you do business thank you very much
Awesome, great prices and quick deliver y!
Very well produced product which was unfortunately received with some shipping damage. Wrapped only in a plastic bag, damage is inevitable. I recommend some additional consideration to your customers and ship it properly protected. If it weren’t for this lack of consideration on your part, you would have received 5 stars on my part.
Item was just as described and arrived very quickly. A+
Great service, Quick Delivery, Good follow up.
fast shipping, great communication, great product
everything from price to delv. was great
Great value
Had to replace boat trailer fenders and ordered from etrailer. Shipment was amazing and quick. The fenders were a little longer than we needed, but my husband made them fit. The outcome is great!
These fenders were a replacement on a Skeeter boat trailer. These fenders are a much better quality than the original fenders and I am very happy with them. Highly recommended.
Husband modified his boat trailer from a single axle to tandem and then needed new fenders of course and these were perfect. Very pleased with them and etrailer.com was great to work with from initial purchase to delivery. Thanks!!
Your fenders arrived yesterday. They look fine. It would have been nice if the person I dealt with on the phone had mentioned the panels that close off the back of the fender. I noticed the panels on your web site while checking to see the status of the fenders that were supposed to be delivered on March 30 but didn't arrive until the 31st. Not a problem, since I now have to wait for the second order of the backing panels. Not totally the salesperson's fault as I should have noticed the lack of backing on the website photo. Always been good dealing with you folks so no problem.
I absolutely hate to leave this store a bad review because I've had nothing but good experiences with them in the past. However I'm extremely disappointed. I Purchased these replacement fenders through etrailer after shopping around and even though they were cheaper elsewhere I opted to do my business with etrailer and pay a little more knowing how impressed I've been in the past with the level of pride they take in shipping items, I've gotten boxes inside of boxes in the past. Unfortunately this time I recieved $xxx worth of dented up fenders for my trailer. They were only wrapped in stretch wrap, not even bubble wrap much less a box. Very disappointed in etrailer after this purchase. You guys can do better, I've seen you do better, with the rims and tires I bought there for this same trailer.
They do not work for 15 inch wheels . My trailer had no fenders so I had nothing to compare them to. I bought some 14 ga. Material and made them 4 inches longer. I radiused the sides with a snap on impact deep socket. Mig welded them up and will sand down tomorrow . They fit great now. Thank you.
Metal was thick enough to weld safely to the trailer frame and thicker angle iron. I did a crappy spray can paint job(just brake cleaned them before painting) and they are still looking great a year later.
They sent me two of the same side fenders I believe two left fenders, I would have returned them and gotten a the correct one sent but I didn't realize until to late. We had gotten someone to come out and weld them on and he is the one who figured out they sent two of the same sides. Because he drove two hours to come weld them on for us and we needed them put on asap, we had to just weld them on anyways. Although they aren't even our welder did a great job at making them look the best he could. Wish the correct ones were sent so that they would have been perfect but it's just a bit of a bummer. The fenders them self are great looking good quality and sturdy it was just who ever packed it unfortunately made an error. I purchased a lot more things from this buisness and all are great other then this error
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.